Add WMI support to set PN Rx Filter which is used to forward
frames to host upon PN failure.
Change-Id: Ib32abc681e17e1a6189a295314a497fc0c21b15a
CRs-Fixed: 3150832
Add WMI service-id for radar found center freq
and populate_tlv_service for WMI_IS_RADAR_FOUND_CHAN_FREQ_IS_CENTER_FREQ
CRs-Fixed: 3135120
Change-Id: I2f25bc0c9629a0bddf79b7f52eb5fcb82206cdc8
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
Extract information from wmi event wmi_vdev_quiet_offload_eventid and
send it to mlme
Change-Id: I49ef7f2811c5975a95e8e33050977c49e2b104e4
CRs-Fixed: 3101974
Rename wmi EHT MU/BE config defines in generic way instead of
having BF in all defines.
Change-Id: I3da2587582556ccda5f1d957faf04aa1a104acc4
CRs-Fixed: 3097171
- Add wmi pdev param ids.
- Add wmi ops to send set retry thresold, mcs drop value
and probe intervals.
Change-Id: Ic316337244e8fab07e7ed214c5fe62bf43a827d4
CRS-Fixed: 3126266
Add SAWf to init resource config to communicate
to the FW to either enable or disable Service Aware Wifi
Change-Id: I8285e383cb464c506e98e3a88dd267dae4b96558
CRs-Fixed: 3101373
When validating MMIE, if PN error is found, track it using relevant
statistics. Defined WMI_HOST_RXERR_PN to flag such PN errors.
Change-Id: Icb1fe9a653f67611539b5cb463adfceadedae38e
Initialize the below wmi service id to enable undecoded frame
capture filter support. This is added to support monitor status
ring configurations for filtering in PHY error packets.
WMI_SERVICE_FP_PHY_ERR_FILTER_SUPPORT
Change-Id: I2e35609e89ac1ba000118bc2699a8ce61612a267
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
Add Host enums for the following WMI pdev parameters related to
Beryllium Spatial Reuse.
- WMI_PDEV_PARAM_OBSS_MIN_DURATION_CHECK_FOR_SR
- WMI_PDEV_PARAM_TRUNCATE_SR
- WMI_PDEV_PARAM_CTRL_FRAME_OBSS_PD_THRESHOLD
CRs-Fixed: 3112080
Change-Id: I19accc6dc2a744599ccce6ebf683499d92881993
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Add EHT vdev param multi user configuration defines for each
bit field of the param.
Change-Id: I5f064cff01d30a86086bec0a65561c10e72c613d
CRs-Fixed: 3052451
Some p2p action frame needs big retry count than the default
max 15 retry count to get high tx successful ratio.
FW allocates 3 extra bits for retry count setup.
To use this field needs FW change in CR 3082533.
Set the extra 3 bits "retry_limit_ext" to "tx_param_dword0"
field for WMI MGMT send command. Existing 4 bits
"retry_limit" combines with this new 3 bits
"retry_limit_ext" to create a 7 bits retry count:
bit 0 - 3: retry_limit
bit 4 - 6: retry_limit_ext.
So Maximum 127 retries can be specified to a certain mgmt
frame.
To use this field needs FW change in CR 3082533.
Change-Id: I889933ea1750c03701ba8a60340f27e6c2594c1b
CRs-Fixed: 3082534
As part of new enhancements, driver is supporting MAC address update
after VDE creation in the FW. To support this feature add WMI support
to send MAC address command to the FW.
Change-Id: Ie4b7291520793c8aa501fefccaf7b91ab22e9054
CRs-Fixed: 3084119
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: I8537147104f30b74ffb2e87946f2e5f4b129f0df
CRs-Fixed: 3075460
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Classify qmi/wmi by request type, only TYPE_STATION_STATS
is designed to be sent by qmi so far. other type will
continue go with wmi.
Change-Id: Ibaee99c0a9d59b0db634e84f3c0b6e40b65a185d
CRs-Fixed: 3077792
Add new wmi ops extract_inst_rssi_stats_resp to extract instantaneous
rssi stats resp.
Change-Id: Idce8a5fb0036145aa14682997ca5101666772c70
CRs-Fixed: 3058799
Currently the WTC duration is not filled from the roam stats
event. This causes the WTC duration to be always 0.
Fill WTC duration from Roam stats event.
Change-Id: Ie616ea1e9a61168f918dc2ac1b5a217901795405
CRs-Fixed: 3073673
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
enum wmi_channel_width has defined WMI_CHAN_WIDTH_160P160
and WMI_CHAN_WIDTH_320. Therefore add corresponding
definitions in enum wmi_host_channel_width, which is then
1-to-1 mapped to enum wmi_channel_width.
Change-Id: Iff5dc1f678874e1d15581a1ebbacc06c25d09699
CRs-Fixed: 3062062
Add wmi support for eht vdev params
mu mode, puncturing mode, ltf config, dcm
and range extension configs.
Change-Id: I6cfc0297a4a323775614f28717c50109558dd401
CRs-Fixed: 3052104
Add 11be D1.0 Mac and Phy capability defines.
Corrected lengths if the capability fields.
Change-Id: I40e2d048946857498c425ca01c3010f255081833
CRs-Fixed: 3025958
For enabling LPI/SP mode host service flag bit is expected
to be enabled. Updated the variable name appropriately to
correctly reflect interpretation of the Host service flag.
CRs-fixed: 3024535
Change-Id: Ie5fa2b4036074bf5304c17984007401f821d6d04
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
