In roaming scenario when there is no hw_mode change is required, roam
failure is sent to CSR which is causing move VDEV from INIT state to
EV_DOWN. In this case, wma_target_req buffer expected instead of
scheduler_msg. As the wrong buffer is passed, it is causing a
system instability.
Fix is not to send reassoc failure for LFR2 when there is
no change in hw_mode required and go ahead with connect.
Change-Id: I7cc7b0ee1407e04c47177838fc069db5b90353d7
CRs-Fixed: 2451178
Read mcc to scc INI to enforce SCC when starting GO in multi
concurrency scenario such as STA+GO.
Change-Id: Iba276cc0afd97119651a12bbefefaccadfc6c500
CRs-Fixed: 2456452
Host need to fill netbuf with qtime instead of tsf. So host first
need to set enable_ppdu_end to 1, so that FW will pass ppdu_end
contents to host, and host can translate tsf64_time into qtime.
The tsf64_time is new added to fw struture, so host will need
add it accordingly to struct hdd_adapter, and keep it updated
in time synchronization function <hdd_update_timestamp>.
Change-Id: Ib19ac1411c4e17624c012f188297c9f2122642d2
CRs-Fixed: 2444456
All INI configuration about modules log level which removed in
previous change "Change-Id: I9c519cf2509e3dc22282f0c7ea6f52cbd2913ccd",
add one INI item for log level of all modules.
Change-Id: Icaedb6bd61a18a81cea9e75e076fe64b11e5bde0
CRs-Fixed: 2442788
TDLS is disabled if second connection comes up.
If that second connection fails then enable
the TDLS again.
Change-Id: Id5df1df81c94bcf3a0616bbfb4b33f3e4d81dcbe
CRs-Fixed: 2445831
This change I29209576622bc2495a7ce3064e82efca2e70d19a was to fix a
memory leak, but ibss creating peer pass a pointer on stack to
wma_set_stakey API, it makes a regression.
Fix it by passing all pointer from heap to wma_set_stakey API.
Change-Id: I178e4b6a15aa24faae78d9846427b3292d11a1a4
CRs-Fixed: 2455529
Change I9d29c141106db479039789d67c45a455e96a118b introduced a WAR for
a BT coex issue. Now that an updated version of HW is available that
does not need the WAR, only apply the WAR if the hardware version
requires it.
Change-Id: Id204163e81a802d16f1a9ffc78bbfcf2549c7dfb
CRs-Fixed: 2437433
Currently LFR band specific ini attributes 5g_rssi_boost_threshold
and 5g_rssi_penalize_threshold programmed with wrong type and range.
This can lead to ignore user-input and always use default value.
To fix this, correct min and max ini values for 5Ghz network RSSI
boost/penalty preference.
Change-Id: If89c09fb1343a68dfaa7241b5ec14b046d1bb758
CRs-Fixed: 2452128
Scenario:
1. Start SAP on any potential LTE-COEX channel.
2. SAP would restart when it gets the event of unsafe channel.
Observation:
SAP restarts on a channel not in ACS channel list.
Expectation:
SAP should restart in channels given by the user
space only which are configured by hostapd.
Issue with driver:
Currently in wlansap_filter_ch_based_acs, the driver
eliminates the channels based upon the ACS start, and
end channel, and not the channel list, which can lead
to almost all the channels being picked, and none eliminated
if the start channel was 1, and end channel was 165, even
when only two channels, say 1 and 165 only were present
in ACS channel list.
Fix:
Fix is to eliminate all the candidate channels which were
not part of the ACS channel list, and pick only those channels
that were part of initial do_acs request.
Change-Id: Ib3b0b0a77c07b423b66e99feb085a370ed01f2de
CRs-Fixed: 2454270
Scenario:
1. Turn on STA and try connect with a PMF capable AP.
2. Configure te AP to reject assoc everytime, with status
code as ASSOC TRY AGAIN.
Issue with DUT:
STA would try again after the time t, which the AP has
specified in the assoc rsp frame, and if the AP sends
the assoc rsp fail continuosly with reason code try again,
then the active command timeout may happen as the
active command to connect would be stuck.
Observation:
Active command timeout happens, because the AP sends
the assoc rsp with the reason code try again and time
after every attempt.
Expectation:
The AP should be added to RSSI reject list, keeping RSSI
as 0, and retry delay as the time specified by AP, which would
result in connection attempt to that AP after the timeout, also
the STA would then continue with the other candidates.
Fix:
Fill the retry delay as the timeout value AP has given, RSSI as
0, and add the BSSID to the reject list, and continue connect
with other BSSIDs
Change-Id: If6155906a586539b3edef3e25bcad4f1e77159c3
CRs-Fixed: 2453875
In function hdd_hostapd_sap_event_cb() there are variables that are
defined in the stack. This can cause stack overflow in certain cases.
Change the declaration of the variables to dynamic memory allocation.
Change-Id: Ic8dca63c57110a92f19a438b2ea9c7ab9936af97
CRs-Fixed: 2446590
Currently, host sends 11k offload command to FW as part of RSO Start
and 11k offload disables to FW during RSO Stop. In case of STA+STA
concurrency, Host sends vdev_stop before 11k_deconfig for
currently enabled STA results to assert in FW.
In order to configure 11k for second STA without assertion, Driver
should de-config 11k for currently enabled STA before vdev stop/delete.
Fix is to configure 11k while start roaming and de-configure 11k
while stop roaming irrespective of the reason for roaming STOP.
Change-Id: I0915d8a0141194c331eb59ba0f2dfa9c8995628a
CRs-Fixed: 2449431
With feature flag for LFR2 disabled, there is compilation
failure in the wlan host driver.
Fix the compilation issues.
Change-Id: Ic21ccd0b313c6690c72a6546eba30c1ecb306cb0
CRs-Fixed: 2453298
If calling lim_send_set_sta_key_req with sendRsp==false, it didn't free
the tpSetStaKeyParams memory allocated in this function. This scenario
is possible hit when station key update during roaming before new bss
adding.
Change-Id: I29209576622bc2495a7ce3064e82efca2e70d19a
CRs-Fixed: 2452108
VDEV UP command doesn't include right MBSSID information, it will
cause data stall issue and so on.
Fix is to provide right MBSSID information with VDEV UP command.
Change-Id: I0201722c14dee1b01b8dacc7e3095301fb02fd3a
CRs-Fixed: 2434405
Action OUI entry in gActionOUIConnect1x1 which was added as a part of
Idc0f3238e3521bb20c592b44de77216125e69504 was missed in the ini
convergence I6984096719a5abd7fa4f0a4f6641a17d29348332.
To fix this, add action_oui entry "001018 06 02FF009C0000 BC 25 48"
in gActionOUIConnect1x1.
Change-Id: Id8dcf2a21409bedbaecd0ab72ecca8d44a622c86
CRs-Fixed: 2452506
For RX DPTRACE, we assume skb->data points to start of ethernet
header. In IPA RX exception path, DPTRACE is put after
eth_type_trans and eth_type_trans removes ethernet header from
skb->data. Thus move IPA RX DPTRACE before eth_type_trans.
Change-Id: I4d1a60292db43964fe08f591f0ee4b14e55ca4d3
CRs-Fixed: 2451155
Currently, TDLS connection can be attempted with
any peer if the stats are more than configured threshold.
If the connection is attempted with connected AP then
add sta will be failed and TDLS disable link is given
by upper layer to cleanup the add sta failure.
TDLS component sends del sta request to lim.
As peer type check was not present del sta request will
be sent to firmware for connected BSS. In the resp path
as there is a check for TDLS peer type, TDLS component
was not notified of the resp and serialization cmd
timeout will happen.
Fix is to check the peer type for tdls peer del sta.
Change-Id: Ibe59256d7f7ba75116e234481569863259f921be
CRs-Fixed: 2453027
Currently, there is no information for roam reason
in hdd.
Fix, Handle roam reason recived from csr, print roam
reason and add roam reason in roam auth event.
Change-Id: Ib9188cb443fa81307fe23d73cce09f7c23bc7a41
CRs-Fixed: 2425910
