* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
Change Ext stats for msdu_missed to reflect reo error.
Update EXT stats transmit enqueue failure value to reflect
enqueue errors on all transmit rings.
Change-Id: I532b2b0adaa3216809978e3d558a3b11e5bc8eb6
CRs-Fixed: 3115517
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases
Change-Id: I9c966c1b8cb09dc5eab6104fdad36c19a1d68045
CRs-Fixed: 3090108
Race condition is observed when runtime suspend is aborted
due to pending tx completions, in this context all tx desc
are checked for corruption or leakage. In parallel tx completion
is received and descriptor timestamp is set to null. As a
result, while checking for leakage in runtime suspend context,
time difference for the tx completion is current jiffies which
is huge, resulting in triggering recovery.
To fix this, tx_desc timestamp is checked before calculating
time latency. Also, printing tx descriptor id for which
completion is not received.
Change-Id: I38b487a47170af374f43c44a96e2a0753f5d57ef
CRs-Fixed: 3117549
simple Alloc is being used in RX path which avoids
certain debug logic. during free of nbuf we should
avoid this debug logic else it will report it as
double free, this will be triggered only when debug
is enabled
Change-Id: Iadb40071fb733cc4de3291784df5075d5a099a8e
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
Tx descriptor is not being freed and put back in tx desc
pool for a long time. As a result, system is not going
into suspended state.
To find this descriptor, during dp_bus_suspend and
dp_runtime_suspend, parse through the descriptor pool to
check for any descriptors not freed for a long and trigger
self recovery when found.
Change-Id: Id97c5c8537c9bec922f4e254b5bf094505ee61ff
CRs-Fixed: 3109868
use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
Add support to set enhanced stats in pdev via cdp pdev set param
functionality.
Change-Id: I4c271dfc71511a0869a795c2adbb0e0eb55ba9d0
CRs-Fixed: 3108103
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
modify dp_getmodulation and dp_getrateindex to pass puncturing mode
update DP_RATE_TABLE_SIZE to support 11BE
Change-Id: I7f59b29c18d882b541dca0477c7ed6c8cff4da59
CRs-Fixed: 3098366
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
Enable the interrupt based processing in monitor mode
for WCN7850, by enabling MSI interrupts for rxdma
monitor destination ring.
Change-Id: Ia3c4456d28ed58c8ef49a7aa8e711076fbdf9415
CRs-Fixed: 3094129
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
In WCN7850, there is only one common RXDMA dst ring for
both the mac.
Add changes to process the common RXDMA dst ring for
status TLVs corresponding to either MAC monitor status
ring. Also use arch ops to get rx_desc from sw_cookie.
Change-Id: Ia2c004755bc4389b587d995286093a519b995cab
CRs-Fixed: 3084442
WCN7850 has only one RXDMA DST ring, as opposed to other
lithium family chipsets, which had 2 RXDMA DST ring.
Refactor the code to pick the number of rxdma destination
rings from CFG context.
Change-Id: I20d475c02690043e969bc7a78605809b8c6814ae
CRs-Fixed: 3084440
In SAP mode, intrabss forwarding can happen when system
suspend is in progress. This could potentially result in
a scenario where SW2TCL HP update goes through after
WOW_ENABLE command is sent to FW.
Fix is to check for system PM states and do an explicit
system wakeup if tx packet gets enqueued to SW2TCL after
wow is enabled. Flush the SW2TCL HP on system resume.
Change-Id: I8dcd108b0dc1d703168f2f7a0ef0627e4dc0b103
CRs-Fixed: 3087727
Currently is_assoc_link flag in cdp_peer_setup_info just means first
link peer during MLO connection, but usually assoc_link is the
link which initialize MLO association and it will be the primary_link.
this introduce confusion with another flag is_primary_link.
Change it to 'is_first_link' in cdp_peer_setup_info
Change-Id: I8d14da73e6a3bbc39a4a527d6c0aa5667255e995
CRs-Fixed: 3090270
Memset Rx ingress stats of pdev to 0 when user makes a request
for ifconfig output for radio.
Also correct the computation of rx_errors stat for ifconfig radio
output.
Change-Id: I78110602b939db0117cf26ca0f8f70cd1ef7b1e8
CRs-Fixed: 3088982
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
Define the interface for Host and FW communication required for
configuration of HW vdev stats in BE architecture and add handler
for vdev stats received from FW.
Change-Id: I5f6a703596bd1fbb5e27e6261befda25aa0c3e12
CRs-Fixed: 3067843
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Following peer stats are updated in per packet Tx completion path:
comp_pkt: Pkt Info for which completions were received
tx_failed: Total Tx failure
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: I7090d1a1ce0a882236e3310e3e9517149cbb146b
CRs-Fixed: 3067843
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
