Current implementation waits for 10ms prior to sending the connection
notification to user mode. This delay is to check for any potential
IRQ HPD event from the sink which may require a link maintenance.
However, this delay may not be sufficient for certain use cases.
Increase this delay to 150ms and modify the implementation to exit
the wait whenever an IRQ HPD is received. This ensures that we can
process the IRQ HPD in a timely manner as per the specification. To
further improve debug ability, add the support to configure this delay
though debugfs:
echo [delay_ms] > /sys/kernel/debug/drm_dp/connect_notification_delay_ms
Certain cables are unable to handle back-to-back HPD notifications and
may end up skipping some events. To improve interoperability, delay the
handling of disconnect notification. Sinks would typically issue an HPD
high following an HPD low only after they sense that the mainlink has
been torn down. Delaying the handling of HPD low would in turn delay the
issuing of the subsequent HPD high from the sink. Here again, make this
delay configurable through debugfs to improve debug ability of these
interop issues:
echo [delay_ms] > /sys/kernel/debug/drm_dp/disconnect_delay_ms
Change-Id: Ie29198af4dcda6d392798a3a93ebb3ddaa6746c8
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Decrease the log level for messages that are typically printed from a
real time thread execution environment (such as the display commit
thread). This can help with cases where a console lock held during the
execution of these real time threads can result in RT throttling issues.
Change-Id: I41e1e4f171b5eee9966d8a7d26d64430a81bc6fc
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Skip link training when in simulation mode considering that we
are not yet implementing tests specific to link training. This
change will reduce the time it takes to power on the panel in
simulation mode, and also reduce the likelihood of failures
caused by unresponsive host machines.
Change-Id: Ie215cafd545bb25b4a033ceae1f275c690e7433d
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
This change adds more debug logs and event logs to MST callflows
to help with MST stability issues.
Change-Id: I9053eab5932487fccce522cc17ed2e9fb8d887ab
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The lock used by the dp debug driver to synchronize the maintenance
and usage of the list of mst connectors is not initialized. This
change adds the missing initialization and deinitialization calls.
Change-Id: I4c24600b47c0b90c256caff45edaea07d082908d
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The debugfs api for mst control is a multi stage process where the
connector id is selected using the mst_con_id node, which is then
used on other commands such as edid_modes_mst for mode switch.
During mode switch control, the mode is set using the current id
for a display and then the switch is initiated through an unplug
and replug. But on an unplug the connector is destroyed and a new
id is assinged for that display on the subsequent plug. This
change detects this scenario and updates the cached connector id
with the id from the newly created connector.
Change-Id: Ib51566ac9e334d4a0b145b6ae549c59c537cb0cd
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When CONFIG_DEBUG_FS is disabled skip creating root directory.
Change-Id: I97bed925392b781b73687164ca55e6cb09f951fc
Signed-off-by: Rajat Gupta <rajatgu@codeaurora.org>
During resume, DP uses AUX to perform various functionalities
like DPCD/EDID read or link training etc. This involves other
hardware modules as well like USB and Charger. In a situation
like continuous suspend/resume, while DP is processing resume,
suspend can trigger resulting in dependent hardware modules
to go to sleep. As AUX communication is hardware interrupt
based, this can result in unstable system.
Abort all functionalities before going to suspend to
avoid unnecessary AUX and other functionality failures.
Change-Id: Id52d408270232adf7258a7eb064ee969eba4be71
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Use the new altmode framework to receive the connect, disconnect
and attention events.
Change-Id: Ic542525b526e1abd0f153c293bca6e4cdbb6bf0b
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add support for PLL programming in the DisplayPort driver.
Change-Id: I4f08a621dcae5d1f54d67bb5c34409249012cc7b
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Since the HDR static metadata block parsing has been moved to
the sde edid parser, replace the usage of drm_connector with
sde_connector for hdr10 so that the modifications to drm_connector
can be removed.
Change-Id: I4526cda426c46708d3689eb8b993b7a4f50d32ae
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Since the VSVDB parsing has been moved to the sde edid parser, replace
the usage of drm_connector with sde_connector for hdr10+ so that the
modifications to drm_connector can be removed.
Change-Id: I7d69aa533e71fa45bfc578db24c17bb23e499c4a
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
DP debug module is run by external script for automation testing.
DP aux and debug modules operate on shared buffers. In some race
conditions, aux and debug module can go out of sync resulting in
automation failures. Lock the buffers to make sure there are no
race conditions.
Change-Id: If0ae370c22cf035f3177666bd714221d6b3cd56e
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Add checks to prevent buffer overflows through debugfs.
Change-Id: I1242a6e94b3182a9a3b0cbef4b04a9f8b14a4103
Signed-off-by: RAJAT GUPTA <rajatgu@codeaurora.org>
Add support to pass extended capability information to the DPCD
debugfs node. This will help to validate features like VSC support
using debugfs node.
Usage will be the same as before and the change will automatically
detect the presence of extended capability field and expect
additional bytes of information.
Change-Id: If541fd8837aac4794c3db0fa3badeab4143ff9c3
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Adding prefixes for error, debug and info
messages in dp files. To enable debug logs
run "echo 0x100 > /sys/module/drm/parameters/debug"
CRs-Fixed: 2493739
Change-Id: Ibf509e837f527be6bff6b7a1c34b0cde2921b388
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Force a disconnect if the simulation client disables simulation
before disconnecting from the simulated sink. This ensures that
the driver will not erroneously attempt AUX transactions in
subsequent interactions after simulation is disabled.
Change-Id: Ibc581deafe46753c514bccc70ba5c953c8d49bd8
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Report the HDR10+ sink capability and payload data when user-space
reads the "hdr" debugfs node. Also add support for reporting HDR
properties for MST sessions via the new "hdr_mst" debugfs node.
Write support for this node was removed since it updated the
connector state in an inconsistent way, therefore HDR updates must
come from the atomic commit.
Change-Id: I58af4042c1b3198eb78fe413728104071cf50caf
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Improve dp mst simulator mode by adding support
for up to 8 connectors, the ability to add and
remove ports dynamically, and allowing for
different EDIDs for each connector.
CRs-Fixed: 2459530
Change-Id: I945e3292a7e5150ab7a6bbe0addc4f4f46d58e82
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
The DP standard leaves ambiguity to if sink synchronization
will be set before auxiliary protocols such as HDCP are to begin.
Update the dp_display HDCP worker to check sink sync only if
explicitly instructed to via the new debugfs node 'hdcp_wait_sink_sync'
Change-Id: I4f4d0b14096aa3dc498e47de557de14092d37a58
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
