Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
1. Register peer->osif_peer for per-STA netdevice delivery.
2. Wi-Fi 3-address frame packets received would be processed
through AP netdevice.
3. Wi-Fi 4-address frame packets received would be processed
through per-STA netdevice.
Change-Id: I102874ea1de9fba40ab7f0e2c32c9de1c9b4d075
During driver initialization, IPA TX and RX doorbell registers
are provided to wlan as physical addresses. With SMMU S1 enabled,
they're mapped to IOVA of wlan domain.
On driver deinit path, do smmu unmap for the two IOVA addresses.
Change-Id: I85ef1c3e99bef504abf09eebf9ace760b68f35f1
CRs-Fixed: 2768303
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
The 11g and 11a connections are latency critical and
hence the tx coalescing cannot be applied on traffic
running for these connections.
Add a CDP API to save the number of low latency
connection in the dtapath vdev handle. The Software
latency manager can use this information to decide
and skip the tx register write coalescing for packet
transmission on low latency connections.
Change-Id: Iff51867447e9d4537a3637cb65d94e184e4249ef
CRs-Fixed: 2769025
peer wlanstats context is used only for RDK Plume stats
but the name is misleading as wlan statistics
Hence rename peer's wlanstats_ctx to rdkstats_ctx and
the APIs the APIs around the same
CRs-Fixed: 2767192
Change-Id: I9e8955554b94fa29a3964fed729a95a4db67c8f6
Register IPA ready callback with IPA driver. The callback
sets ipa_is_ready flag in the host driver and kick starts
the ipa init sequence as part of which the Tx buffers are
mapped to IPA.
None of the IPA APIs are invoked until IPA ready registration
is complete.
Change-Id: I6570b2b347052164a274fbc22358ebf0719dcabf
CRs-Fixed: 2735107
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
Sometimes frames are queued to dp_rx_thread wait queue
during WoW suspend in progress. At this time dp_rx_thread
is in SUSPEND state and these frames can't deliver to Linux
Stack, for ICMP case, if no other frames come to wake up
system, ICMP timeout will happen. Add a RX suspend check
in WoW to avoid suspend when frame comes before WMI_WOW_ENABLE
sends to FW
Change-Id: I756d3127f75da8f0e6e303c1250c01ce0c6ac573
CRs-Fixed: 2756263
This change will acquire MSCS parameters from the
MSCS request sent by the STA and provide it to the
data path which will later use it for building flow
database.
Change-Id: I972154792c682527f8df04de693077188726e8da
CRs-Fixed: 2669386
Peer wlanstats context was accessed directly from
PPDU cookie, with this approach the cookie pointer
may become stale if peer goes for deletion
Hence access the wlanstats context using CDP API
with stats context protection
CRs-Fixed: 2740261
Change-Id: I54c785325f8852ad422f05527b98ebca6e4d6cf0
Add support to get device name and invoke debugfs init
on post attach so that device name is updated at that point.
Change-Id: I0e0a06cae4bef4d6e43c0295f5db99220b185df2
Soc level exception descriptors limit is sent from FW in WMI service
ready TLV. Using that to check for exception packets limit
Change-Id: I99d20ecbb6a5bfd61b5a8a205775d34749eae880
In case of driver unload, there can be a race condition
since the timer for processing monitor status ring can run
in parallel to the unload time wow ack response handler,
which is also flushing all the monitor status ring entries.
To avoid this race condition, stop the monitor reap timer
as a part of target suspend, and process all the outstanding
entries in the montior status ring.
This will make sure that the monitor status ring is
processed from only one context at any given time.
Change-Id: If61327c73fdddc414b3957b69ae986f2a26bb803
CRs-Fixed: 2677812
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
- For directly connected peers, during peer de-auth,
a Single Peer delete request to the FW from host
should delete all AST entries attached to the peer.
- This optimization is aimed at optimizing host-fw
handshake messages
Change-Id: Iaebe2022f90ef9a10a6a0f37b21c409cf9e9ea39
CRs-fixed: 2647242
As part of componentization of packet capture feature
removed cdp ops of packet capture.
Change-Id: Iea07cbdc5782dee58cd1c87377363cc26479464f
CRs-Fixed: 2659439
Enhanced channel frequency response (CFR) based on monitor status
ring, need to enable mon reap timer before starting CFR and disable
the timer after stopping CFR capture. This change adds interface to
enable/disable monitor status ring's reap timer.
Change-Id: I843433ac07c4d55e14b42855ee22779eb7ecb678
CRs-Fixed: 2639307
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
Send peer_id in peer_add_wds_entry API of ol_if_ops,
so that the dp peer doesn't need to be explicitly
retrieved in corresponding offload API.
Change-Id: Ia32d31946de43e9faa1970f4e74f2810f4125995
CRs-fixed: 2629475
Move RCC specific debug statistics to Data path
to avoid allocating nbuf for the PPDUs for which
MAC has not sent a Freeze TLV. Instead just update the
debug statistics at an earlier point irrespective of
MAC sending Freeze to PHY, to gather below information:
Status of number of PPDUs being captured by PHY
Status of MAC sending freeze TLV for the PPDUs
Update freeze reason for the number of PPDUs received
Add support to clear debug statistics at user's will.
Change-Id: I8def3ce1f3ecc0b169030704db3fb1fb1c0a20ee
CRs-Fixed: 2609604
Add code to move enum _ol_ath_param_t out from common DP code
and move it into OL layer
Change-Id: I92fa5f52c581a18449ab42da41ff5f6f1a2bc595
Crs-Fixed: 2560866
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
In case of wlan suspend if packet log is enabled stop the
monitor reap timer and reap the pending frames in the ring.
Also in case of FW target suspend ACK status reap monitor
status ring. During target suspend FW will disable the monitor
status ring. This change will make sure no pending frames in
the ring during start of system suspend and the target suspend.
Change-Id: I350fa508f3ddd125d5e00a7fc60e89507ce8fb4e
CRs-Fixed: 2604389
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Add ast-type as argument in wds peer create command.
This helps to identify the ast entry from the time when ast add is done.
Change-Id: Ia0c073cf8f2573608e6a84410dffee6edf9b064b
Provide an API to fetch required individual peer stats
from the data path peer stats instead of copying the
whole peer stats structure.
Change-Id: I1c9619bc7d9bb0e3e3df6d38cc5f4570869e31fe
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I4a41211464a30e018e8b73b8e9b91c7a509327b4
CRs-Fixed: 2541711
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Add monitor mode support to capture packets over 6GHz frequencies by
getting capture frequency from pdev.
Change freq type to qdf_freq_t.
Change-Id: I7b6edc43e254dc98a3c2939c369874bec9d16ddd
CRs-Fixed: 2568970
