If firmware supports CSN[Compressed Steering Number of Beamformer Antennas
] 8x8 and if the concerned INI(i.e. gTxBFCsnValue) is set above 3 which is
default fw support currently, send Probe/Assoc Request with CSN in VHT caps
as set in INI. Else set CSN to 3.
CSN of Beamformer Antenna in VHT caps is one less than the max number of
space time streams that the STA can receive in VHT NDP(i.e. CSN in VHT caps
= max space time streams STA can receive - 1)
Change-Id: I6c77f7513ee090beba8849b27c90ac0346e1ac58
CRs-Fixed: 2052348
Propagation from cld3.0-1.1 to cld3.0-2.0
Firmware sends a value of 0x127 or -1 to represent
an invalid SNR to the host. Handle it in the host
for both the values
Change-Id: I374c626566cd5b7d67aaca43167f9fe4bd4b85a2
CRs-Fixed: 1105132
In case of join failure during auth and assoc phase scenario
join response is sent to umac before peer delete response is
received from firmware.
Defer the join response till the peer delete response
is received from firmware.
Change-Id: I380b969d76f4b86508c0523bf7879d8504a5f207
CRs-Fixed: 2036890
In failure scenario join response sent to umac before
peer delete response is received from firmware.
Defer the join response till the peer delete response
is received from firmware.
Change-Id: Icac97e0ed0e374bdd7f7d50e357af8f88b519f4d
CRs-Fixed: 2030841
As part of UMAC componentization add runtime suspend and resume
support in PMO.
Change-Id: I120044bb5638ca75e6ac46b22bb194520da22fea
CRs-Fixed: 2030194
Requirement is to get CCA from frmware when connection fails due to
assoc/auth/probe response timeout.
Change-Id: I062343ed065d7b0c38b9e3b24ecfa9851b9b1537
CRs-Fixed: 2018594
Replace the legacy regulatory apis with regulatory component
public service apis
Change-Id: Ifd8c93fc8f57116cfc432b853248b35fd7ed1b94
CRs-Fixed: 2008013
Add new ini parameter, gActiveMcBcBpfMode, to control active BPF
mode for MC/BC packets. By default its value is set disable.
Also, rename ini param name to gActiveUcBpfMode from gActiveBpfMode
and respective cfg variable name to active_uc_bpf_mode from
active_bpf_mode.
Change-Id: I1a42351585c34e7b6da8c26af9ac7b7abe0c0322
CRs-Fixed: 2032699
Logic to calculate max chainmask supported is used to calculate
max NSS and thus when NSS passed is 2 the firmware was sent value
3 which is causing firmware crash as max NSS supported is 2.
To fix, added logic that if NSS is greater than WMA_MAX_NSS(2) make
it WMA_MAX_NSS.
Change-Id: Ic7ff541b60434c0ce501d245462cd45e62dd9403
CRs-Fixed: 2033675
For regulatory offload, send the regulatory config settings to regulatory
component to compute the current channel list. Query channel list for
each band. Populate the channel list in wiphy. Also do not register
regulatory notifier with the kernel anymore.
CRs-Fixed: 2008013
Change-Id: Ia4995c7498d97fe1e37717e65daa9dcacb2f21b3
Add structure changes for querying WDI-stats, register the callback
functions for IPA to query WDI stats and sets the quota limit
Change-Id: I05d9d50fad735fa0a57c4de23c81461f6e12b648
CRs-Fixed: 1095710
Add an ioctl that allows a user to dump a specified number of records to
dmesg for WMI and Credit History.
Change-Id: I644dcf5edcb2f875af1e99e7b4677cde37081674
CRs-Fixed: 2028760
In case of dfs offload, do not run cac timer, as cac will also be
offloaded in that case. Decide the same based of service bit info.
Change-Id: If4dd62628270ff0ba8632a9cd644a9d7ed6f31a4
CRs-Fixed: 2021357
Add support to fill cac duration and dfs region in vdev
start command, these values are used in firmware on phyerror
processing and cac timer offload cases.
Change-Id: I8bfbd4a3f59002f92ee2e5e321c15da849fce9ec
CRs-Fixed: 2021357
Currently, Host modify the vdev pause bitmap
directly which may be problematic in scenario
where this value update information need to
notify to other components.
Hence as a part of this fix, Add (set/clear/update) API's
for vdev pause bitmap modification.
Change-Id: I5c8d6576d27076f697463b42632962327306902f
CRs-Fixed: 2013376
Add support to enable or disable range extenstion using
enable_range_ext iwpriv command. get_range_ext iwpriv is used
to check if range extenstion is enabled or not.
Change-Id: I2231ef9641cfa669dd4b1e820a3b7ec00546a9a3
CRs-Fixed: 1073481
Add support to enable or disable DCM using enable_dcm
iwpriv command. get_dcm iwpriv is used to check if
DCM is enabled or not.
Change-Id: I9d81bba92d227a238faf2e705132c80c8e91de86
CRs-Fixed: 1073481
Add support for vendor commands to query HE capabilities.
Add support to include HE capabilities in wma_handle as received
from FW to be sent to userspace when queried via vendor sub command.
Change-Id: Icbf141bd1e0646346c2b18aabf3dfb3590d853d7
CRs-Fixed: 1073481
Add changes for 11ax peer association.
Add support for the following
- update data structures to hold HE capabilities
- setting up HE capabilities in the session
- updating sta context with correct HE config
- intersecting self and peer capabilities
- update derivation of peer phymode to handle 11ax phymode
Change-Id: I46c7a7328d09e74bc0c5b25a67f6273d7eb04d30
CRs-Fixed: 1073481
Add new dot11mode and update the utility functions to derive
the dot11mode based on the userspace config, INI config and
FW capability.
Change-Id: I5780120ef7bc2b78fd596e937fe14a2c8ad88348
CRs-Fixed: 1073481
Ignore the Roam Synch Indication from firmware if the
user space has already issued a disconnect before
receiving ROAM_START from firmware.
Disconnect might have cleared the roam profile and will be
sitting in the queue for the PE processing to happen.
If the disconnect is in the queue and a roam synch indication
is received, then check the CSR state from the first callback
of roam synch propagation and bail out there itself.
Disconnect will eventually send a ROAM_STOP command to the
firmware and it will cleanup
Change-Id: I528f552cd601dc9d23f709410115fb0af944899d
CRs-Fixed: 2018928
Active Mode Berkeley Packet Filter (Active BPF) is a new feature that
allows firmware to apply BPF even while the Apps processor is active.
There are 3 modes:
* Disabled: do not apply BPF in active mode
* Enabled: apply BPF to all packets in active mode
* Adaptive: apply BPF up to some threshold to avoid performance impact
Add an ini item called gActiveBpfMode to configure the Active BPF Mode
in firmware.
Change-Id: I6cf60d67238802fe1e1662c040910091f5c25bec
CRs-Fixed: 1111400
This change includes adding hooks in the data path to
send WMI command to enable LRO or/and configure a hash
seed value
Change-Id: I3f068307f7669c4ff8baa5102e9fb7729d4a348d
CRs-Fixed: 1094775
The Preferred Network Offload (PNO) wakelock protects Supplicant while
it configures the new scan results. The wakelock timeout should be
optimized as much as possible on production builds, as it is never
released by the driver. For additional power savings, reduce the timeout
of this wakelock in production builds compared to debug builds.
Change-Id: Iaccf56e00e933d3a216212ef219f31d28d022ea5
CRs-Fixed: 2016286
Currently, WMA maintains vdev up flag but other component
also need this flag to check vdev up status. Hence as part of
this fix removing this flag instead using Objmgr Vdev mlme state
for same purpose.
Change-Id: If1922791e71c07621708755de67fbcc2f7a469cd
CRs-Fixed: 2014026
wmi_desc cleanup for UMAC convergence as mgmt_txrx_desc
to be used in place of wmi_desc.
Change-Id: I48c1b965096610373a850fcf834288a15bd2ad19
CRs-Fixed: 1103247
Send beacon frame in wmi_roam_invoke_cmd to firmware.
This helps firmware skip scan to connect to requested
BSSID.
Change-Id: I5c6e375309dcb3bdd6430a3d501bade5cfe2e88d
CRs-Fixed: 1116901
Change signature of pe_handle_mgmt_frame, wma_form_rx_packet
and wma_mgmt_rx_process APIs by replacing rx params of type
void pointer with that of struct mgmt_rx_event_params pointer.
Change-Id: Idfa54f1c9bfec22a2cf2e98740765dcd797513df
CRs-Fixed: 1103247
qcacld-2.0 to qcacld-3.0 propagation
Currently host only report connected frequency and noise in
survey dump.
Add changes to report all supported frequencies, active time,
TX time, busy time and noise.
CRs-Fixed: 1061040
Change-Id: I2fa509f53b47d65ba0f4abbc438834b85b9c21f6
A new HDD Request Management framework is being deployed. One of the
requirements of that framework is that every request API must have a
provision for a caller-supplied context, and that caller-supplied
context must be returned to the caller when the callback function is
invoked.
Currently sme_encrypt_decrypt_msg() is not aligned with that
requirement. There is no provision for a caller-supplied context;
instead the HDD handle which is stored in the MAC context is always
returned.
In order to prepare sme_encrypt_decrypt_msg() for the HDD Request
Management framework update the curent implementation as follows:
1) Remove the separate registration and deregistration of the callback
function pointer, and instead make the callback function and
callback context parameters to sme_encrypt_decrypt_msg().
2) Pass the callback context when invoking the callback function.
Change-Id: I6e8c5405393f4cb732d9874ac07145caf5e95cac
CRs-Fixed: 2000026
After roaming, FW tries to detect for a subnet change and if
there is a change, then it wakes up the host if it is suspended.
Upon waking up, host handles the roam synch and indicates event
to supplicant. The event to supplicant from host could be
delayed.
Fix is to add wakelock for roam handoff.
Change-Id: I777d37993784c623542dad898e255205ec1bae53
CRs-Fixed: 1115355
After control path scheduler componentization CDS message queue
APIs are no longer used hence replace CDS mq APIs in WMA module
by scheduler mq APIs.
Change-Id: I57e878480eff8998a307bbacf3e480b8b77b9f3a
CRs-Fixed: 1114371
Traditionally full spectrum scan on STA/CLI is not allowed when SAP/GO is
already present on DFS channel.
With new generation of hardware, agile scan and agile DFS scan features
are supported which will allow hardware to do full spectrum scan even if
SAP/GO is present on DFS channel.
Change-Id: I7e5a21601642e0d6afef73beeecf80a3e0475909
CRs-Fixed: 1103730
MCL driver interactions with mgmt txrx component in init deinit
of driver. Also, changes to make legacy path to go through mgmt
txrx component for both tx and rx mgmt. frames.
Change-Id: Icf368358fef3b9204bed5195a2502b0ea5f052d8
CRs-Fixed: 1103247
The current driver inherited support for the "frame_xln_reqd" flag
from a prior version of the driver. In the prior version of the driver
this flag was used to communicate to hardware whether or not
hardware-assisted data frame translation was required. However the
current driver does not use this flag, so remove it from the code.
Change-Id: I41047864de374c12a89fa031c6d38729a285262a
CRs-Fixed: 1075631
qcacld-2.0 to qcacld-3.0 propagation
Save RSSI of current connected AP when disconnection happens.
User space has to use getRSSI private IOCTL to query the RSSI value
after disconnected event.
Change-Id: I51ab69f2b0bda7c6b3a2689297ca56941471b1cc
CRs-Fixed: 910970
