Set cpu_mask for affine cores on init before sending a
request to PM QoS interface to insert a element into the
list for DMA latency in the QoS framework.
Change-Id: I81f17077c6ddce69c99047c46cef008b6b195d77
CRs-Fixed: 2551349
Fix compilation issues related to IPA and DP when built for target
QCA6174. Here is the change to fix them.
Change-Id: I4441858450a78cdd98e3c5e25cdeee00c3a7db9e
CRs-Fixed: 2554619
In os_if_ndp_end_ind_handler, when it returns, make sure the
allocated memory ndp_instance_array is freed.
Change-Id: I39725bdeae01e3e3839f9bbac67721d4a1f38670
CRs-Fixed: 2552236
In hdd_stop_adapter and hdd_stop_all_adapters, sap_pre_cac_work is
sometimes being flushed when it is not initialized. Put a check to only
flush if it is initialized.
Change-Id: I1e25ae06f351188c1bc45c4f94c80b3c77799b88
CRs-Fixed: 2554551
When values such as -EAGAIN are returned as the return value, it causes
the notifier block chain to stop being parsed by ip6_route_dev_notify(),
which results in the pointer to nh_dev in fib6 being NULL since the value
is not able to be set. To solve this, set hdd_netdev_notifier_call to
return NOTIFY_DONE so that the error value returned does not prevent the
notifier block chain from progressing.
Change-Id: I294a837e9f6c9712d45a9a96b5f0967af968b8b6
CRs-Fixed: 2553168
Currently in the driver, hdd_send_hang_reason() checks validity of
current context using wlan_hdd_validate_context(). This checks if the FW
is down and if recovery in progress along with other conditions. This is
a contradiction as the purpose of the API is to send the reason for
hang, which can come during FW down. The wlan_hdd_validate_context()
check prevents this from being sent to the userspace via the command
QCA_NL80211_VENDOR_SUBCMD_HANG.
Remove the wlan_hdd_validate_context() check as it is not required as
per the scenario.
Change-Id: I34da018ab4792f5c613d7ec2da8526261ee20e84
CRs-Fixed: 2554019
Presently, the driver performs device assert on re-init failure after
SSR. This is not desirable as in some cases the reinit failure can be
recovered from.
Change the default value of the INI controlled variable to 0 to avoid
this assert.
Change-Id: I802921e8602e0648cacc4185f550b72ad2b3af66
CRs-Fixed: 2547295
When DFS and CAC are full offload, driver passes cac duration time
to FW in vdev start wmi command. Currently when SAP starts in DFS
channel, cac duration is passed as 0.
Cac duration should be set to pe session when vdev starts, then it
can be passed to FW correctly.
Change-Id: Ica2ae344d6734df89e22b088dea7a5059f1370f9
CRs-Fixed: 2548492
Fix compilation error in legacy features after 6Ghz band
support and code cleanup.
Change-Id: I5b8c9b46d7647e88044b2f0a0f9c2d35fa4b8a89
CRs-fixed: 2554204
The register window needs to be configed properly before accessing
any larger than 4K range PCIe registers. Expose the lock in PLD to
avoid race condition when both platform and host drivers
try to config it.
Change-Id: Icd3df3d4d2cc2ecc3df608e7b767a3e654b94500
CRs-Fixed: 2549887
In DBS mode 2x2 VHT40 2G and 1x1 VHT 40 5G, the MAC 1 (5G)
doesn't support VHT80. Update the ch_width to max of 40Mhz
in beacon OMN ie when switch to DBS2.
Change-Id: If5cf65bca815d1e8df67a1515b2fb3edcba52a8e
CRs-Fixed: 2520719
In special case when vdev delete for wlan disabled,
event eWNI_SME_DEL_STA_SELF_RSP has been sent
to QDF_MODULE_ID_SME queue, but scheduler thread have no
execution chance, timed out waiting for sme close session in
hdd_vdev_destroy, sme session isn't cleaned up.
When enable wifi again, vdev create failed for cannot re-open
active session, wifi failed to start any more, can't recover
until system reboot.
Fix:
When timed out waiting for sme close session in
hdd_vdev_destroy, clean up sme session too as normal process.
Change-Id: If6c6ed313928294bb83ebbc0e716a574e6a07470
CRs-Fixed: 2547355
Support wlan ipa clk voting for kona. Host should provide
bandiwdth levels to IPA driver for which IPA uc monitors
the levels. Once the threshold is reached IPA uc interrupts
the IPA driver and IPA driver informs host driver via callback
registered.
Change-Id: I9fd805d69858a413f20b9e55a9c02a82054c646b
CRs-Fixed: 2526300
Move to the common psoc object and retrieve the cfg ini
information from the legacy implementation.
Change-Id: I38147c748796550f2adede44b681559a4f329fbf
CRs-Fixed: 2547536
This change is to support 11ax linkspeed rate
on UI.
It supports different config for gReportMaxLinkSpeed.
Current 11ax rate support to max 80 nss2 mcs11.
Change-Id: Iff8cbafe1354ab50c4b3a90ef8ab698a3350a21d
CRs-Fixed: 2529291
Since peer mac instead of sta_id used to find pointer to peer in
dp_register_peer, so copy and pass peer mac address when register new
ndp peer.
Change-Id: I47ab345fff83d9c03208c5c1457db0fb7f6ed9c0
CRs-Fixed: 2546705
Update SME/CSR for using channel frequency in STA connection
params and handle 6G AP IEs for association.
Change-Id: I1725223b6763a729762b604c850c9b493f739ae6
CRs-fixed: 2552009
HE STA / AP operating in 6GHz should send HE 6GHz band capabilities
element. Update LIM layer for sending this IE in assoc, reassoc and
probe request / response frames.
Change-Id: Ie991ad3656e6b721e0ee0783b5974d438699091c
CRs-fixed: 2552009
Due to channel number ambiguity with 6ghz, update channel references
in HDD STA connection path to use channel frequency.
Change-Id: I81f3449c9087030e4d98c17a5b12c731f99b39ab
CRs-fixed: 2552009
Function csr_update_sae_config is inital connection, so it should
be out of WLAN_FEATURE_ROAM_OFFLOAD. While function
csr_process_roam_auth_sae_callback is roaming related change,
so it should be in WLAN_FEATURE_ROAM_OFFLOAD.
And do the static inline to the dummy functions to avoid the warning
which defined but not used.
Change-Id: Ib873050d2f5bdb960244d2f900e078f314962a8b
CRs-Fixed: 2552295
Fix compilation error in WLAN_FEATURE_HOST_ROAM after policy manager
public API update to use channel freq as function argument instead
of channel number.
Change-Id: I690f25a169f4438272d44bb7292558a0171d1ab8
CRs-fixed: 2551820
