Use the flag RX_PEER_INVALID_ENH for invalid peer
event instead of FEATURE_NAC_RSSI
Change-Id: I87e301a48b1ccdcd28f8e2eb0ba80b215efa384c
CRs-Fixed: 2969193
As part of mac address filtering feature for scan radio in special
vap mode, on addition of first NAC entry or deletion of last NAC entry
the corresponding monitor filter needs to be set or reset
Add change to support ops callback function required to set or reset
monitor filter settings are runtime.
Change-Id: I916c0b246bb180363f1a181ef49618af763b261d
CRs-Fixed: 3317409
Before we are updating RSSI params directly into mon_rx_status
this structure will reset every PPDU this breaks iwconfig,
wlanconfig and monitor packet RSSI values.
Fix added to storing the values in the mon_pdev.
Change-Id: I9f8fa776c65cbad84fac5e8c2f65b3fce1386e20
CRs-Fixed: 3276503
Compilation is failing when Monitor support is disabled
Moved monitor related API and structure to monitor header files.
CRs-Fixed: 3257872
Change-Id: Ie1b3dc16b38c88bfd73fc89aaa395d4b57a61e5c
Add support and handle tx monitor full buffer payload and
other minior fix include change of name for uniformity.
Change-Id: If401ecd5e1c6263584fa7013df672459c883ca8b
CRs-Fixed: 3215244
Update RSSI specific parameter from beryllium
specific path to common path as part of
extending feature for lithium also.
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I4e35d873db6d1ad03d86694a8d36decffe409a0e
CRs-Fixed: 3231120
To avoid memory fragmentation during wifi down/up,
initialize ppdu info flex mem pool during pdev attach
instead of pdev init.
CRs-Fixed: 3235962
Change-Id: I7970ab056e600ccfe28ae1ccdc50a66d5ae0ade8
Changes to configure the rxdma ring for CFR. Move existing
API of legacy chipsets to dp_mon_1.0 and add Waikiki
specific API in dp_mon_2.0.
CRs-Fixed: 3231265
Change-Id: Id7276bb7bb7f58461c7e10a0695c3e78a1c39b0c
a. Fix memleak issue due to RX_HDR not received for a MPDU
b. Compute appropriate packet offset for non-decapped packets
c. Add correct DMA_LEN while adding a frag to SKB.
d. Add debug stats
Change-Id: Ie946f79df94df05789220b97c159c60d608bf1b2
CRs-Fixed: 3213698
This change fixed compilation issue when enabled two configures -
CONFIG_WDI_EVENT_ENABLE and CONFIG_REMOVE_PKT_LOG.
Change-Id: I121ea61bd3681b834a36c0bc8017b855897023a4
CRs-Fixed: 3223552
Add API to iterate through all modes to set setup tx monitor based
features. Also added filter setup function for tx lite monitor mode.
Made additions to filter print functions and added the fields that
were missed.
Change-Id: I20070f75d800199199195f73b1e2a13b428d5672
CRs-Fixed: 3191619
Split tx and rx monitor buffer add function so that
they can be indivudually called when lite monitor mode is enabled.
Change-Id: I9996d0261f1912237bd6fa45058d410698b9fa28
CRs-Fixed: 3206170
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Fix below errors when the item DISABLE_MON_CONFIG is defined:
No return value for below two APIs:
dp_tx_mon_buf_refill() and dp_rx_mon_buf_refill()
CRs-Fixed: 3205083
Change-Id: If449616e30e75c23c7b25fb449a0ad8e501529aa
Add rssi dbm support bit for rssi_comb calculation
using parameters received from the fw.
Change-Id: Ice57ed69db74852a8b03752632bae747c043e93d
CRs-Fixed: 3183406
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
Enable smart moniotr operations to add/delete
NAC clients and to get NAC client rssi value.
Change-Id: Ifc933d474da15101293cf3e1c07261917fb634f9
CRs-Fixed: 3169256
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Segregate the stats among dp_peer, dp_txrx_peer and dp_mon_peer
structures.
Segregation is done as per below:
* Move stats updated in per pkt path to dp_txrx_peer
* Consider stats updated purely in per pkt path as per_pkt_stats
* Consider stats for which there is an alternate path of
updation as extd_stats
* Move delay stats and jitter stats to dp_txrx_peer
* Maintain calibrated stats in dp_peer
* Move rdkstats_ctx from dp_peer to dp_mon_peer
* Move invalid peer from dp_pdev to dp_mon_pdev
As per the above segregation, if there is not support for
alternate path of stats updation, then stats in dp_txrx_peer is
combination of per_pkt_stats and extd_stats and dp_mon_peer
does not hold any stats.
If support is there, then dp_txrx_peer holds only per_pkt_stats and
dp_mon_peer holds extd_stats.
Change-Id: I2eb81d1b93a178985c05ff4f6557a173cc8a262d
CRs-Fixed: 3092123
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
Due to usage of lithium specific structure, the filter settings
were not getting reflected in the htt msg that is being sent to
FW. Usage of BE specific monitor pdev structure is helping out
in configuring the monitor filter settings for various modes.
Change-Id: Ie4a59ec16717d752c6c49624142966722bfacc08
CRs-Fixed: 3118596
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
