Update the hardware blocks and corresponding APIs
to configure new D-CWB data path. Add new hardware
pingpong blocks that are dedicated for second DCWB.
Change-Id: I529c24ac5aa483f30b6c9e7653eb1713c6b8fb8a
Signed-off-by: Shamika Joshi <quic_shamjosh@quicinc.com>
This change adds includes for <linux/file.h> required for the
display driver in kernel 5.19.
Change-Id: Ibe5401997b43844b692869ebb6d28faa7bcb7740
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Expose the number of cdm blocks available through the connector
capabilities. Add CDM to the topology_control table, so usermode
can use the property to reserve the CDM block during modeset.
Additionally, fix a error code return during CDM block reservation
failure in sde resource manager.
Change-Id: Ib42ca4e8614076a8e5df77d8abc77a9e73674390
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
During dcwb mixer allocation, resource manager allocates
the first available mixer in the free list. In dual display
uses case with 1 1 1 topology if only secondary is running
CWB then, resource manager allocates DCWB0 which leads to wb
timeout due to HW does not have the connection between LM1
and DCWB0. This change allocates proper dcwb for the LMs in RM.
Change-Id: I0c8b04b46ccad5a7d7dd591fbfa3ea0915eccdc6
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
Starting mdss 9.0, dpu supports triggering
the frame fetch through hw-fencing. This change
adds support for this hw-fence feature.
Change-Id: Icc7d0b69fc2a51103d14612f5ac89b44a47ed826
Signed-off-by: Ingrid Gallardo <quic_ingridg@quicinc.com>
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
This change collects the OPR, MISR values. If the values are
different than the previous then notify to client with custom event.
Change-Id: I2546439be1f665d90e6505d65283d28096bf7cdd
Signed-off-by: Akshay Ashtunkar <quic_akshayaa@quicinc.com>
Avoid various possible nullptr dereferences.
Addresses various issues highlighted by static analysis.
Change-Id: I36d34d610b37bf2799a7e34cd1de8b909b5c0ae4
Signed-off-by: Nisarg Bhavsar <quic_bhavsar@quicinc.com>
Merge reg_dump and dbgbus dump flag into dump_mode, and bring
back debugfs node "evtlog_dump" to keep flexible controlling
of evtlog.
Set in_mem option as default dump mode, since in_coredump
option will be enabled once HW recovery feature is enabled.
Change-Id: I75de1a69b01594b652479bf79201591ac0bf62e5
Signed-off-by: Bruce Hoo <quic_bingchua@quicinc.com>
Add line insertion support for sspp, this is used to support
display with external splitter. Line insertion logic checks
the difference between screen logical height and physical
height. If any difference is observed adds dummy and active
lines on screen.
Change-Id: Ieec322273df000a53fb39e05174c2d67c3c2da81
Signed-off-by: Rajesh kv <quic_kvrajesh@quicinc.com>
During POMS process, from vid to cmd or from cmd to vid, we both
see black screen, this is caused by backlight operation. Logically
display driver should not operate on backlight during POMS process.
Change-Id: I3bc76d6ed9ccee50f740c36cb276b6b103e7d43e
Signed-off-by: Yu Wu <quic_zwy@quicinc.com>
This change adds a connector OP, that will be used to update frame
transfer time dynamically at the request from user space.
It also adds parsing for new device tree entries that set the minimum
and maximum trasnfer times on a mode basis. These min and max transfer
times are also published to userspace through the connector mode info
capabilities blob.
Change-Id: I12aedf96a51ff7feb2c5b3b1353d3c4ec8dcb068
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Install default panel mode for connector panel_mode property
so that the panel mode can be changed to default mode accordingly
when SDM is restarted.
Change-Id: I3229a1b8e60da9030d6e20112f6b1f3071b5f988
Signed-off-by: Lei Chen <quic_chenlei@quicinc.com>
This change avoids null pointer dereference in different APIs.
Change-Id: I01eba9d64fa4ba2fd81f7f39f586867e22d66771
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
* quic/display-kernel.lnx.5.10:
disp: msm: sde: avoid error during fal10_veto override enablement
disp: msm: update copyright description
disp: msm: sde: configure dest_scaler op_mode for two independent displays
disp: msm: dp: updated copyright set for 4nm target
Revert "disp: msm: sde: consider max of actual and default prefill lines"
disp: msm: sde: Reset backlight scale when HWC is stopped
disp: msm: dp: avoid duplicate read of link status
disp: msm: dsi: update vreg_ctrl settings for cape
disp: msm: fail commit if drm_gem_obj was found attached to a sec CB
disp: msm: dp: updated register values for 4nm target
disp: msm: sde: update framedata event handling
disp: msm: dsi: Add new phy comaptible string for cape
disp: msm: sde: software override for fal10 in cwb enable
disp: msm: update cleanup during bind failure in msm_drm_component_init
disp: msm: sde: dump user input_fence info on spec fence timeout
disp: msm: sde: add null pointer check for encoder current master
disp: msm: dsi: enable DMA start window scheduling for broadcast commands
disp: msm: sde: avoid alignment checks for linear formats
disp: msm: reset thread priority work on every new run
disp: msm: sde: send power on event for cont. splash
disp: msm: sde: always set CTL_x_UIDLE_ACTIVE register to "1"
disp: msm: use vzalloc for large allocations
disp: msm: sde: Add support to limit DSC size to 10k
disp: msm: sde: add tx wait during DMS for sim panel
disp: msm: dsi: add check for any queued DSI CMDs before clock force update
disp: msm: sde: correct pp block allocation during dcwb dither programming
disp: msm: sde: avoid setting of max vblank count
disp: msm: sde: add cached lut flag in sde plane
disp: msm: sde: avoid use after free in msm_lastclose
disp: msm: sde: update TEAR_SYNC_WRCOUNT register before vsync counter
disp: msm: dsi: Support uncompressed rgb101010 format
disp: msm: sde: update idle_pc_enabled flag for all encoders
disp: msm: sde: flush esd work before disabling the encoder
disp: msm: sde: allow qsync update along with modeset
disp: msm: dp: avoid dp sw reset on disconnect path
disp: msm: sde: consider max of actual and default prefill lines
disp: msm: ensure vbif debugbus not in use is disabled
disp: msm: sde: update cached encoder mask if required
disp: msm: sde: while timing engine enabling poll for active region
disp: msm: enable cache flag for dumb buffer
disp: msm: sde: disable ot limit for cwb
disp: msm: sde: avoid race condition at vm release
disp: msm: dsi: set qsync min fps list length to zero
disp: msm: sde: reset mixers in crtc when ctl datapath switches
disp: msm: sde: update vm state atomic check for non-primary usecases
disp: msm: sde: reset CTL_UIDLE_ACTIVE register only if uidle is disabled
Change-Id: If480e7f33743eb4788549f853ba05e744ecb38d3
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
Use #if IS_ENABLED() instead of #ifdef for configurations as vendor module
guidelines.
Use #if IS_ENABLED(CONFIG_XXX) instead of #ifdef CONFIG_XXX to ensure that
the code inside the #if block continues to compile if the config changes
to a tristate config in the future.
The differences are as follows:
1.#if IS_ENABLED(CONFIG_XXX) evaluates to true when CONFIG_XXX is set to
module (=m) or built-in (=y).
2.#ifdef CONFIG_XXX evaluates to true when CONFIG_XXX is set to
built-in(=y) , but doesn't when CONFIG_XXX is set to module(=m).
Use this only when you're certain you want to do the same thing
when the config is set to module or is disabled.
Change-Id: Ia806b9b01ad8414d0e4de027a382cb68e7fb4a6a
Signed-off-by: GG Hou <quic_renjhou@quicinc.com>
Large allocations using kzalloc can lead to timeouts. This updates
the allocation calls accordingly to use vzalloc to remove
requirements on contiguous memory.
Change-Id: I86fa0ae13277d97477210a082703514df792d8a9
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Flush ESD status work before resetting the encoder state during
virt_disable sequence to avoid stale pointers being used in
the ESD work.
Change-Id: I4bb08a7a7ae33ad6386169667692736e554141c4
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Add downscale blur connector properties to expose the hw block count,
downscaling filters used and the ratios supported. Add a custom dnsc_blur
property to allow usermode to send the required configuration to program
the hardware. Expose only for the virtual connector as the dnsc_blur is
only supported with writeback block.
Change-Id: I35dd263d9d5aafdb59bacbb3a0528ffd2bcaf6a3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Extend the topology_control connector property to support downscale
blur block. This gives user-mode the capability to reserve the downscale
blur block. Add sde rm changes to reserve the block based on this
connector property during sde_rm_reserve.
Change-Id: Ica2d7c57e6f528eb917acb6aae7e860352895a06
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Commit ddac29b ("disp: msm: Pass the full state to crtc plane and connector
atomic functions") pass full state to crtc, plane, and connector atomic
functions and retrieve drm_crtc/plane/connector_state within the atomic
function.
This change puts macros in the callers of atomic functions to handle API
changes between kernel version 5.10 and version 5.15.
Change-Id: I8e710e33f0a149bbfaa54820a7174a05810e2da4
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Currently, writeback frame-triggers are serialized by default. Add
logic to support the different frame-trigger modes which can be set
through the connector property or encoder debugfs node.
- default: waits for frame(N-1) completion (wb-done-irq) before
configuring current frame(N) and releases the commit-thread on
frame-start (ctl-start-irq)
- posted-start: no previous frame(N-1) completion wait. Configures
frame(N) and releases the commit-thread on frame-start (ctl-start-irq)
- serialize: no previous frame(N-1) completion wait. Configures frame(N)
and releases the commit-thread on frame(N) completion (wb-done-irq)
(wb-done-irq) before configuring the next frame.
Restrict wb posted-start support only for MDSS 9.x+ targets, with older
targets defaulted to default-mode.
Change-Id: Id441378fd79ecbfcfb820da1ff23b14ccfd8e798
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add check to clip the sunlight visibility scale to an upper limit of
MAX_SV_BL_SCALE_LEVEL * 4.
Change-Id: I8cc7bf8fba90e115d046ec030983801ce6d93c1d
Signed-off-by: Ping Li <pingli@codeaurora.org>
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
Move all the individual boolean flags from HW catalog into a
"features" bitmap. These flags are used to specify support of
various target specific features.
Change-Id: I2334b3b873f3737f91bbae4ef576408247710156
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Pass full state to crtc, plane, and connector atomic functions and retrieve
drm_crtc/plane/connector_state within the atomic function. Additionally,
the plane atomic update function is used as an upstream hook as well as
locally called in the plane restore path. To ensure both paths are functional,
introduce a plane atomic update version which takes in drm_plane_state
keeping with the previous parameter expectations.
Change-Id: Ia295935dd81ea8680a347eba0929e209d93ae830
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add new properties to support dynamically turning on and off digital
dimming and setting new minimum backlight.
Change-Id: I3b94190877d556768ba2c92ec59432dec44de0de
Signed-off-by: Ping Li <pingli@codeaurora.org>
Current logic will unnecessarily call backlight update
twice in cases where backlight level is changing. When
this happens, there is a potential delay waiting for the
first command to complete before sending the second
backlight update with the same value. This change removes
one backlight call and now only calls update if the
property is marked as dirty.
Change-Id: I260f0d73b3a5af9ced7ae261d247595f965a8d9e
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change resets panel_dead property at the end of dsi bridge post disable.
Currently as part of the ESD recvoery sequence, dsi_bridge_enable resets this
property, but WD vsync source is selected before this point based on the older
panel_dead status. With this change, panel_dead will be in a proper state and
the correct vsync source will be selected during recovery.
Change-Id: I6d614113cfb0ae8a857974bb4d4f8ceb5988a0c8
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add a utility function to check if HW has been handed over to
another VM.
Change-Id: Ic36ca1e7f15f7608e69d69fc3f4e7ad40be15704
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change adds support for qsync min refresh rate per
timing mode and populates qsync min refresh rate based
on the current fps when qsync is enabled.
Change-Id: I191d1d72e95dd065c8c0b56a6100104c00c6d8f6
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
The brightness value from backlight device is OS brightness, not panel
backlight value. This change corrects the brightness bound check to
check against the OS brightness max value instead of panel backlight max
value. This change also move the bound check in dsi display to make sure
the max backlight value send to panel is within the expected range.
Change-Id: Ic9e3ba69700ae4c0e950cb665837a1f0a1317b26
Signed-off-by: Ping Li <pingli@codeaurora.org>
In PM resume with CWB concurrency usecase, crtc pointer in
conn->state is NULL since drm_mode_config_reset operation is
performed on pm_resume. This change relies on conn_mask in
new_crtc_state for primary connector retrieval and also adds
get_num_lm_from_mode callback to DSI for LM count retrieval
from dsi panel topology. Existing get_mode_info api cannot
retrieve the topology info because mode->priv_info is NULL.
This occurs as WB encoder is added in the drm encoder_list
before primary encoder, introduced as part of commit d28ebf05f4
("disp: msm: sde: populate WB display encoder list before dsi").
Change-Id: I55358fd88ab778bd81475cf3628be13335de1cb5
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
The connector detect function is currently implemented as a
callback from the framework, and creates a context before
calling the detect_port_ctx MST callback. This change updates
the callflow so that the framework calls the new detect_ctx
function in the MST case. This removes the need for creating a
new context before calling further downstream functions.
In addition, references to the mst_connector_get_info
function were replaced by connector_get_info to avoid
redundancy.
Change-Id: I224d09e77fad4b6925a42b1bc912a05e3e4d060a
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Add a new connector property to allow DC dimming feature to set
dimming backlight LUT. This change also adds a connector event
for client to register for backlight info needed for digital dimming
feature, including OS brightness, OS brightness_max, panel_backlight,
panel_backlight_max, and scale factors from ABA and LTM features.
Change-Id: I78f713fb2b965ca24effd973b4dfa9ff07a852f8
Signed-off-by: Ping Li <pingli@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Mode information apart from the fields in
drm_mode_modeinfo that can trigger a modeset like
dsc-nondsc, video-cmd are defined in sub mode.
For each mode in connector->modes there can be
multiple submodes.
Change-Id: Ib8697d3fa4ea5261d9ac4943b1a4149e22c4da2f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds logic to determine dsc switch based on
the connector property "CONNECTOR_PROP_DSC_MODE" and
performs seamless DSC switch if there is any change in
DSC configuration. The connector property is populated
in msm_sub_mode based on which suitable mode is selected.
Change-Id: Ifc4931f16dfb814781bc1d72b103e09103e6bfee
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
This change prevents entering into idle pc during ESD
recovery. In the event of a panel dead scenario, the panel
TE is no longer valid until display is enabled again. Until
the time display is enabled, idle pc will be blocked so
that display does not fall into then exit idle pc and
attempt to set the vsync source to this invalid panel TE.
Change-Id: Ibdc71b803d50923832f08b238a96aa28854aaea0
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Change return code in set property retire fence function
to properly handle the cases when the user value is 0.
Change-Id: I32481ba6bdb13df707cf36a70aa2d49506cd7d7c
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add VM ownership checks before accessing the HW through the debugfs
path in sde crtc/encoder/connector modules to avoid illegal access.
Change-Id: I4ff8f29353835d263beb2091bdeec40125addbf8
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently, RFI feature only supports panel that contains
a single timing node. This limits the feature availability
for panel with multiple modes or with DFPS support.
This change adds support for RFI on panels that contains
multiple timing nodes.
Change-Id: I3a7aadf7b6da3518350b2eb815602b13b5c259f5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add a new connector range property and a new entry to the panel
capability blob to publish the list of supported RFI frequencies.
In addition, add the required functions to set, validate and update
DSI bit clock rate value to trigger an internal seamless mode switch
and reconfigure DSI clock and PLL.
Change-Id: I7d19cc369f8c5528709f2f20a51ef02180ebdea4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Reduce cyclomatic code complexity of sde_connector_atomic_set_property function from 34 to 22
by moving OUT_FP and RELEASE_FENCE property setting code to separate
helper functions.
Change-Id: I8ac171fa5b8631c7133d276dd872a6c79c5e3114
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
