Currently two RXDMA_STATUS rings are allocated for the station targets
irrespective of whether DBS supported or not. Only one RXDMA_STATUS_RING
being used for non-DBS targets like QCA6750 and WCN6450, hence change
the number of RXDMA_STATUS_RING allocations to 1 for non-DBS targets.
Change-Id: I4f14c8b5cee892979765f776b37d44e99ba2d558
CRs-Fixed: 3578733
Monitor destination ring interrupt processing is configurable.
For improved CPU utilization the batch counter threshold and
timer threshold is updated and also an option is provided to make
this values configurable through INI.
Change-Id: Ibe671927f53f3e8fac7f17540c21a2c7edae427b
CRs-Fixed: 3569505
TX completion ring is not configured correctly when Qdata
is enabled. This change is aimed to fix the regression.
Change-Id: Ib14a1c3a3cd57693579cedda5713eb539e853961
CRs-Fixed: 3557033
For legacy tx monitor, we need msdu completion in sequence.
Modifying the return buffer manager id during enqueue will serialize
the msdu completion.
Return buffer manager will be over ride only when tx_monitor
is turned enabled.
Change-Id: I500065077b59b3ea3561ec8fc49af8cbe58c1dfe
CRs-Fixed: 3539636
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Use page frag init time rx buffer allocation for efficient usage of memory.
Add ini dp_bufs_page_frag_allocs to disable and revert to original slab
nbuf allocations.
Change-Id: Iac78895addfe9da0118bc071c691a26216d6fda1
CRs-Fixed: 3553800
When the peer delete timer/vdev manager response timer expires, host checks
if the umac reset is in progress. If so, host will retrigger the timer.
It is possible that the umac reset is just completed and either of these
two timers got expired. In this case, host will assert saying that the peer
delete response/vdev manager response is not received from FW. FW may take
a few milliseconds to send the peer delete/vdev manager response to the
host after the umac recovery completes.
Hence, to avoid the crash, check if the umac reset was in progress during
the umac reset buffer window.
Add the below changes as well,
1) INI support to get the umac reset buffer window value.
2) Renamed the API dp_umac_reset_is_inprogress as
dp_get_umac_reset_in_progress_state to return either
CDP_UMAC_RESET_IN_PROGRESS or
CDP_UMAC_RESET_IN_PROGRESS_DURING_BUFFER_WINDOW.
Change-Id: Ie15ef0731bad4b0ed955a479f00e297b7ba10729
CRs-Fixed: 3522665
Add support for sw2rxdma_link_ring size cfg ini.
Also add wrapper function to get the sw2rxdma_link_ring size.
Change-Id: Ic5b17f029fe6c735785701801b75284dd489ac1e
CRs-Fixed: 3525040
Include Umac reset irq line in the mask table only
when it is enabled for 8 msi group to make sure
the legacy devices are not impacted.
Change-Id: If8f6b7f948a7c9f45247e8ff934642f0a532ff0d
CRs-Fixed: 3499500
add multiple history array to keep track of mem allocation and
deallocation for qref table.
Change-Id: I9fa97fbe5a5c36509cbb5a458851a152200318a5
CRs-Fixed: 3475981
Add new set and get APIs for cfg items so that
those cfg items can be managed from the external
components.
Change-Id: I52eb747fc6c544cfe43273c3b8b0fcc27b5a4a5f
CRs-Fixed: 3502582
As part of CPE V2 or split phy board, IPA will start using
two TX ring and for the same disable the DP interrupt mask
assignment.
Change-Id: Ia676bfa6a8b89274f5dfd313f73761132bb7909c
CRs-Fixed: 3445325
1. Add ini configuration for enabling round robin flows to
core distribution in FSE
2. Register FSE APIs to CDP FSE ops
Change-Id: Ic61c44eb9bc68a8c1a0116d4e6aa1d54cf489b62
CRs-Fixed: 3505287
ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Support REO2SW ring pointer update threshold configuration,
it is helpful for PCIe utilization improvement.
timer based threshold - M: issue pointer updates when M micro
seconds has elapsed.
number based threshold - N: issue pointer updates when N entries
updates occur.
Change-Id: I49ed388520fd52e97e303d6ea9c04ced6cb5cf5f
CRs-Fixed: 3420101
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Enable or Disable PPEDS for specific
WLAN Soc.
usage:
add "ppeds_wifi_soc_cfg=0x02"
in /ini/global_i.ini to enable
PPEDS only for second WLAN SoC.
Change-Id: I65f138cf37298feac70e76b95c22507e58394618
CRs-Fixed: 3408439
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
Make DP changes for handling umac reset in QCA5332.
Changes are done to program msi_data value of the IPC interrupt to FW.
Change-Id: Ib6453755e191da655b87b528a7cef38a464f316b
CRs-Fixed: 3401146
If TX data is TCP ACK, configure TX flow index 3 in
SW2TCL data cmd ring descriptor.
Change-Id: Ibd08b13ba8f0481aa11cd9c3dc54a49cd73674fb
CRs-Fixed: 3368303
An INI dp_tx_spl_device_limit is defined and can be used to configure the
limit of TX descriptors that can reserved on the SOC to handle
special frames like EAPOL.
CRs-Fixed: 3343207
Change-Id: Ic84a11249880a3541749a72ac6d60df548f2bc5c
An INI dp_tx_spl_desc is defined and can be used to configure the
limit of TX descriptors that can reserved on the pdev to handle
special frames like EAPOL.
CRs-Fixed: 3343209
Change-Id: I6578bddd1f4ea07528c9f66f778b113ec6fb9e61
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
The kernel-doc script identified a multitude of documentation issues
in the wlan_cfg folder, so fix them.
Change-Id: Id6bfb397608de6b858e448a867a3c21dffc9a178
CRs-Fixed: 3352408
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Add ini configuration to disable invalid decap type handling
during rx mon tlv processing. This is a temporary change for
debugging purpose and will be removed once HW issue is resolved.
Change-Id: I75eb53170833224ddd144baf1b1d8034f988dd3c
CRs-Fixed: 3308998
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
