Decouple fence structure from video buffer. Also add some
misc fence flow setup support.
Change-Id: Ia4e223a3a288f0dae3238850685f3a73d4b9400a
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
packetize dynamic controls set via request api along
with corresponding input buffer under the same hfi header
and queue to FW.
Change-Id: I8bf82f7ccb1ab16c42ce02189a208f5f7cb8dc70
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Add fence support for decoder output buffers for
the consumer to use it to improve latency.
Change-Id: I7384b4a9793248988a2d2d546a535f26636d5bb3
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
[1] Remove CAP_FLAG_ROOT flag. Root willbe identified
with has_parents() api.
[2] Replace field(struct msm_vidc_inst_cap) cap -> cap_id.
[3] Rename below pool apis.
msm_memory_alloc -> msm_memory_pool_alloc
msm_memory_free -> msm_memory_pool_free
[4] Remove struct msm_vidc_inst_cap_entry usage in inst.
inst->firmware.list -> inst->firmware_list
inst->children.list -> inst->children_list
[5] Organize msm_vidc_inst_capability_type enums in such
a way that all parents placed first then children. It
will save CPU cycles while preparing caps_list.
Change-Id: I376f4e6ddec37ce326c393fba133e19ba70bab09
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Convert multi-parent, multi-child based dependency tree
into flattened list. It is organized in such a way that
all parents willbe present before self or any child node.
For some caps, adjust sequence is called without preparing
parent nodes. So that is leading to undefined behaviour.
Added change to address these problems.
Change-Id: Ib28cae8a4ed7e019c80ecfc06519ef78ffa4dc08
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
- Request api allows to synchronize controls along
with buffers.
- Client allocates a request fd. This request fd is
associated with control and set using s_ext_ctrls.
Such controls are stored by the framework and not
applied immediately.
- Request fd is also associated with input qbuf and
queued to driver. Following this actual request is
queued. Buffers do not enter the queue untill the
request is queued.
- As part of qbuf, driver call request_setup() which
inturn sets the control to driver.
Change-Id: I316c4dc2a0091b21059230be5ee5fd6379259456
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Added support for timestamp reorder. It is default
disabled.
Change-Id: I51a6fc785860081b651fc67f443132cb2675b9fd
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
- Added change to print buffer statistics like total and avg
etb, ebd, ftb, fbd counts, client set fps, actual fps,
bitrate values in 1 sec window and these stats currently
configured to print at every 1sec boundary.
- Convert meta buffer prints to low level logs.
Change-Id: I1c93eea90fbd5460eb51bbf133c513157003d51e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Decoder base cycle requirement of B frames has increased to 80.
Also, updated cycle count requirement for Encoder HIER B usecase.
Pulled from CL: 3302650.
Change-Id: I0f56166b7261e161630feeb8793473491dacccd7
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Track dmabuf refcount during dma_buf_get() and dma_buf_put().
So if any dmabuf present with non-zero refcount during close,
then i.e a dmabuf leak. So during session close print error
and call dma_buf_put_refcount_completely() api to recursively
reduce the count to zero and will call dma_buf_put() to avoid
dmabuf leak from video driver side.
Change-Id: I2028c18ca067977eac3cdf0ce7d6cc4200739408
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
1. Calculate framerate based on buffer timestamp
2. If framerate changed and stable for 2 frames,
update it to firmware and in driver internally.
Change-Id: I7feda86dec8fcfc1dff6defac8c15a97c1b8393e
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
- Maintain free & busy pool to track buffers separately
- track double-free cases during msm_memory_free()
- track memory leak, by checking busy pool buffer count.
it is expected to be zero at the end of a session.
- maintain common api's to init, alloc, free, destroy
for all below buffer types.
- struct msm_vidc_buffer
- struct msm_vidc_alloc
- struct msm_vidc_map
- struct msm_vidc_timestamp.
Change-Id: Ib8655047c3883ea6601344661058d7a629ffd5bd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Priority level was not determined at few sequences.
Determine the priority level and set to firmware, if
there is a change in driver and firmware priority.
Change-Id: I97861fd4ce8cfb7cf828a8da9a5ce8ba900280ef
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently session_error check is scattered at multiple places,
So check for session error at ioctl entry point itself(for set
type controls only).
Cleanup &inst->response_works.list as part of session close to
avoid leaks and remove unused variables from inst struct.
Change-Id: I349ec845cc71814b33a94ac07c7628304ddae564
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
adjust MAX_MAP_OUTPUT_COUNT based on resolution
to enhance performance and reduce memory pressure.
- For 8K session: count = 20
- For 4K session: count = 32
- For 1080p session: count = 48
- For all remaining sessions: count = 64
reduce MAX_DPB_COUNT to 32.
reduce DEFAULT_MAX_HOST_BUF_COUNT to 64.
Change-Id: I0e6d25121947524b843e9cce96b75871aba174af
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- subscribe for dpb list property in combined
mode on output port.
- copy dpb list property payload from fw to
static array.
- using this array, mark read_only list buffers
as non-reference if not part of array. if count
of such buffers is greater than output min count,
send to fw for release.
- once fw returns them, destroy these buffers.
- unmap stale output mappings due to lazy unmap feature.
- unify release internal functions into common function.
Change-Id: Id32f04efb19eecaff453cc4383ee8296a0246263
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- add support to skip lazy unmapping for decoder
output buffers only. Map twice for these buffers.
- v4l2 client owned RO SMMU mapped buffers are
maintained separately in read_only list.
- For FBD with RO flag from fw, add buffer to read_only
list. Else remove from this list.
- During FTB, if buffer present in read_only list,
add RO flag to hfi buffer and queue to fw.
- During streamoff output, unmap all buffers except
those present in read_only list.
- During close, unmap completely and clean up read_only
list, output list.
Change-Id: Iacee7d298dfbff0b9cb6f17dff27ad98574b489b
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Do not access buffers list of an instance without
acquiring its instance lock in msm_vidc_set_clocks()
and msm_vidc_set_buses().
Change-Id: Ic7e8e15eaddca3b77bd4eccc6b728de20d3bcc78
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Instead of formulating session_id, codec_type, domain at
each log print, used pre-formatted char array to print
the vidc logs.
Change-Id: If7a93ecb25a7b1b98ebca6f39e3990079c00b5dd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Currently msm_vidc_close is called directly for any failure
in msm_vidc_open(at any level). So i.e leading to free without
alloc & deinit without init problems.
Example:
if msm_vdec_inst_init is failed, msm_vidc_event_queue_deinit
will be called as part of msm_vidc_close and leading to crash
at v4l2_fh_del.
v4l2_fh_del should be called only if v4l2_fh_add is successful.
Change-Id: I5dd063c19327b881f533aa141f77b23ee7fad125
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to added buf flags in dequeued buffers based
on HFI_PROP_NO_OUTPUT and HFI_PROP_PICTURE_TYPE property
values received from video fw.
Change-Id: Icf285ab7feb88daf8991705964ed0d3214c99870
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Iris2 specific calculations for Work Mode and Route.
Also add quality mode support.
Change-Id: I7a1e2fa27236aa749978d146d85fd0af6177084c
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add support for some advance controls to set adjusted
client set values to video fw. Mentioned below
are the properties added.
- HFI_PROP_LTR_COUNT
- HFI_PROP_LTR_USE
- HFI_PROP_LTR_MARK
- HFI_PROP_IR_RANDOM_PERIOD
- HFI_PROP_AUD
- HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL
- HFI_PROP_8X8_TRANSFORM
- HFI_PROP_LTR_MARK_USE_DETAILS
- HFI_PROP_DEBLOCKING_MODE
Change-Id: Id31e9774154556df7c66cda366913489815a2723
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support for S_PARM and G_PARM to enable client to
set and get frame rate and operating rate to driver. Also
includes some inst database grooming changes.
Change-Id: I5b39537662faa56effa0ac63acdfc100d83bf403
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- post input psc, output psc and last flag
events to response work handler
- fix issue with release and create internal
buffers during input psc
- clear last flag after session continue
Change-Id: Ic0278a09a0f6ee8ffff8840a47cd80c046ecadc4
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support for all the required instance states and
move the states accordingly.
Change-Id: Iac1046ab8c7a0116df6ed3069d566c7a1b65e61c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add support to get and set selection to update
crop and compose values in driver.
Change-Id: I1f38ac6a4f3ceac64d08d66f30b422efd79959a9
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Allocate ARP buffer in CB4 to avoid HW hang issue.
Add support to set HFI_PROP_RAW_RESOLUTION at enc INPUT port
and did necessary changes to set HFI_PROP_CROP_OFFSETS at
OUTPUT port only for encoder. Also added support to set
missing basic control properties to video firmware.
Change-Id: If5bc2940d37ac20c1889cd4de466be09f1e1f28b
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Set ipsc subscribe properties once during start input
and opsc subscribe once during start output. Fetch all
property values from ipsc and set the same values to
output port.
added codec config control support.
Change-Id: I3683becdb62096ee4dbed36181a2dc9876c53724
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Firmware returns meta buffer after actual buffer but
client needs meta buffer before actual buffer. Handle
the case using MSM_VIDC_ATTR_DEQUEUED flag.
Change-Id: I99048a2f110a1b14bc4bb140b6211afa340c9f38
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
add support for input port settings change raised
by fw. update driver subscribed port settings
properties with instance. Raise event to client.
Release, get, create and queue input internal buffers.
Send resume commond to fw on input port.
Add support to destroy internal buffers.
Change-Id: Ic979cf2d0c7298b8083347173a973d553ed52af8
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to encoder start and stop streaming sequence.
Change-Id: Ie4f124af212ed030178d0e2fe5af3d6f9f639aa0
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
