Add peer type for MLO bridge peer. This is a special peer
created on 4-link MLO AP to allow association of some 2-link
MLO STAs.
Change-Id: Id2073ea82582ae67cae03b813d8f7bf44fde9aff
CRs-Fixed: 3412299
The kernel-doc script identified many documentation issues in the
umac/cmn_services folder. A series of patches have already fixed most
of the issues on a sub-folder basis, so fix the remaining ones.
Change-Id: Ibdfe9f0c5e8d6ddf9696d66d2a4a31978ff89004
CRs-Fixed: 3403261
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 0 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I4f2e4120a258cc4a20aabeed503709aa2ceb8ec9
CRs-Fixed: 3349467
When AFC event come and update 6 GHz SP channels' state and power
attribution, SAP which already started on 5 GHz or 6 GHz channel
can move in or out from SP channel, which has higher tx power limit.
SAP target channel/bandwidth is decided by ACS channel select callback
register to SAP module, which will take channel max tx power limit
into account.
After target channel/bandwidth determined, SAPs move to same target
channel/bandwidth with eCSA process. If violate any concurrency
limitation, AFC DCS process should abort.
Add AFC component id and reference id.
Change-Id: Iba6933a30c0957eabf549fd6c8442bed547e8152
CRs-Fixed: 3204172
CH_WIDTH_320MHZ definition is in 11BE define currently and it's
causing duplicate code in 11BE supported/unsupported cases.
Definition need not be in 11BE define as it doesn't cause any
impact on memory.
Change-Id: I996aad941bef33eef6527c4c34c5b9efd75d9b84
CRs-Fixed: 3246577
Select best candidate by mlo score algorithm.
Check bss mlo type first by mlo info, mlo config, partner frequency and
dbs/sbs cap, calculate candidate score for SLO/MLMR/EMLSR bss types.
For SLO case, same as before except:
Decrease percent of legacy band and nss to include 320M and 8x8.
Decrease max percent of congestion from 100 to 80 to include MLMR joint
congestion.
Increase weight of both band width and nss to 20.
For EMLSR case, same as SLO except adding EMLSR boost score.
For MLMR case, besides adding MLMR boost score,
calculate joint RSSI/band width/congestion score for combination of
scan entry + each partner link by new mlo algorithm, select partner with
highest total joint score as candidate combination, only activate that
partner link.
Change-Id: I640c6825d945caf5fab504a77717195c2eac0c93
CRs-Fixed: 3234912
This change adds MBSSID support for MLO AID manager.
It handles AID allocation and AID free for MLO and Non-MLO peers
associated to MLO/Non-MLO VDEVs
Change-Id: I616cca6afeb9178a3b7f183c6bd986fe9b30a4fa
CRs-Fixed: 3200173
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
This change adds MLO support to Peer.
It implements,
1) MLO peer list management
2) AID allocation
3) MLO Peer creation/deletion
4) Notifying partner links on peer creation/deletion/assoc
Change-Id: Ie1b675dccdf0de1d79f6f32d9255cf3cca53fdf2
CRs-Fixed: 2967057
Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
Add a new component for MBSS framework in object manager.
Add a new trace module for the new MBSS component framework.
Change-Id: I7ef3559d90a6bc7f558e3994a1a91f09985d90e9
CRs-Fixed: 2958764
Add component id for Repeater feature.
Move the feature specific flgas to Repeater component.
Change-Id: I1615ce0023a0b0f7a3fffa206d6fa5f320a18ed3
CRs-Fixed: 2936326
Build regulatory channel list for 802.11BE wireless mode and for the
new channel width 240/320 MHZ. Following is the summary of the changes:
1. Add a new channel width CH_WIDTH_320MHZ.
2. Enumerate a list of 320 bonded channel frequencies.
3. Increase the maximum supported bandwidth to 320/240 in the channel map
4. Introduce reg_channel_list structure which holds an array of
channel params and also a bitmap to indicate the regulatory
puncturing pattern.
4. Build 320 and 240MHZ (punctured 320) regulatory channel list.
CRs-Fixed: 2901260
Change-Id: Ide6a070e0121fbdabf77820a552ca743ca38732a
Add gpio configuration vendor interface to set target
gpio configuration and output info, meanwhile add
GPIO component id
Change-Id: I0b551cd63b61675406fe37549f2efeca1a2999bf
For FILS pmksa cache, the pmksa add/del/query is based on SSID
and cache id. The current crypto pmksa cache API dosn't support
SSID and cache ID.
1. Add SSID/Cache ID support to pmksa API
2. Add RSN IE pmkid field based on SSID/cache ID
Change-Id: I1577c6293b75d6f8e6210f314dd83462e06d8190
CRs-Fixed: 2621860
Add initial set of coex files, implement the basic functions.
Coex component is used to process coex related configurations.
CRs-Fixed: 2565088
Change-Id: I8b9600809691b808f97c621cb329a6ab9941814c
Few phymode are missing from enum wlan_phymode and many are not
valid phymode, e.g for 5ghz 40minus and 40plus are not valid.
So add the missing enums and remove invalid enums from enum
wlan_phymode.
Change-Id: Id6a1fb4cf0d629cc410bd262a048b5050d05ed5d
CRs-fixed: 2505422
Do not configure legacy rate to FW if it is HE connection, otherwise
FW does not work.
Change-Id: I391e328ac71761722642f884e2be2b3eb15d2a1d
CRs-Fixed: 2475625
Add interface API to send reject ap list to FW,
also add the blacklist manager UMAC, and QDF component
for the same.
Change-Id: I826e537683441762043003d71dc2b79ceebebbcb
CRs-Fixed: 2460770
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. User
space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425197
Change-Id: I3857d2a605baa2673af333a7a0412f1690b59769
Currently 1024+ is the number of peers, increase it to be 1536+,
(512*3) as the three radio soc supports 512 clients per radio.
Change-Id: I5f1d69206c536bb706825fbd70736dce21b64161
CRs-Fixed: 2436434
Previously host driver only supports initial SAE and Suite-B
authentication types and roaming to SAE AP is blocked. The
802.11 specification has introduced the Akm suite 00:0F:AC:9 for
FT-SAE and 00:0F:AC:13 for FT Suite-B akm type. Add support for
FT-SAE and FT-Suite-B.
Extend the enum wlan_auth_type to include WLAN_AUTH_TYPE_FT_SAE,
WLAN_AUTH_TYPE_FT_SUITEB_EAP_SHA384. This enum wlan_auth_type is
the new implementation for akm type in converged scan module
corresponding to the legacy eCsrAuthType enum.
Add changes in scan module filter to support FT-SAE and
FT-Suite-B authentication suites be added to filter->auth_type.
csr_scan_get_result() will translate the legacy eCsrAuthType
to wlan_auth_type and push it to the filter->auth_type.
Change-Id: I74d7b0be74d33ced5d3e528032aec6e057a75ff3
CRs-Fixed: 2400683
The following are currently hardcoded. Instead, use appropriate build
configuration values if available:
* WLAN_UMAC_MAX_PDEVS
* WLAN_UMAC_PSOC_MAX_VDEVS
* WLAN_UMAC_PDEV_MAX_VDEVS
Change-Id: I78986ea2461ab99543aa617f3c5bf12e9aeb890a
CRs-Fixed: 2393639
