When user makes a request for stats using Link peer mac address,
then fetch per pkt stats from MLD peer for Link peer.
Change-Id: I64e0b10eaca82c87e7066d3ca1dbefad63a186a8
CRs-Fixed: 3208757
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Add support to get per pkt stats from MLD peer for primary link peer
only when user requests for link peer stats.
Change-Id: I6df0daa4a175cc5869012538294ed41ae2443e48
CRs-Fixed: 3203506
In case Multi chip MLO configure same hash key for
all SOCs in MLO. This change is needed to avoid
same flow traffic distributed to multiple REOs.
Change-Id: Ib6cde4ae32e58ef2d45c02d640c133458f5bfac5
CRs-Fixed: 3201978
Add support to move FISA FST from DDR to CMEM, enable it for Kiwi
Adding CMEM support for FISA FST includes
1) Reserving CMEM memory space FISA FST
2) Add HAL macros for CMEM flow search entry
Change-Id: I45fc91a86c1ac89d3d95b246e26ea981314425a8
CRs-Fixed: 3199250
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
There is init failure about monitor status ring after started CFR
capture. So extend num_rxdma_status_rings_per_pdev to 2 for KIWI
which is same to HSP.
Change-Id: Ic24d732957dc1991a3fca350aebe5f57d9b02577
CRs-Fixed: 3203678
Set per_tid_basize_max_tid so that BA size is configured per TID.
Accordingly fix dp_check_ba_buffersize to ba_window_size to incoming
buffer_size. Assert for any BA window size above 1024.
Change-Id: I40cb2aac012c50e253c3ef22d44cf5db3abfb7bb
CRs-Fixed: 3182601
Use microsecond timestamping for the tx descriptors
for capturing the latencies more accurately. It will help
to determine the appropriate bucket.
Change-Id: I216e083a7c89b01b6f2f384c1c0a85ca323d3a3e
CRs-Fixed: 3165153
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
For KIWI, STA AST index lookup search is enabled and remote
AP peer's AST index will be stored in STA Vdev if receive
AP peer htt peer map msg. but if STA TDLS connection happened,
host will receive another peer map msg for remote TDLS STA peer,
this remote TDLS STA peer's AST index will overwrite original AP's
AST index. if TDLS disconnected, STA vdev will still use remote
TDLS STA's AST index for TX, then TX to AP might fail.
Add is_tdls_peer flag in dp peer and configure this value by
cdp_peer_set_peer_as_tdls() from control path right after TDLS peer
created. if is_tdls_peer is true, do not store this TDLS peer's
AST index to STA Vdev, skip bss_peer flag setting as well.
Change-Id: I7b5df1caca6a0b5305a6e867cd92099b5f6a4890
CRs-Fixed: 3151035
Per peer extended stats are maintained as a histogram having 10
delay buckets. Each packet will fall into one of these buckets as per the
delay calculated. These buckets are now increased to 13 as per requirement.
Change-Id: I7f9a01c21b748a0f589bb44e6f7dd69a1c5702a7
CRs-Fixed: 3163423
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
Kiwi target does not used TX cmd credit ring.
Hence disable the tx cmd credit ring for Kiwi.
Change-Id: Ibd5fe2905a7362ea2ab89e65d77c7aea6ab259ee
CRs-Fixed: 3150814
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Search flag addrX and addrY will be enabled for STA + TDLS case,
but currently TX bank profile is not updated which then STA still
use default TX bank profile - index based lookup search, TX might
fail.
Update bank profile with addrX and addrY search enabled.
Change-Id: I6af12d3707b59c5d4b4bba1fc5ec05a22bfcd984
CRs-Fixed: 3148759
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Add a separate APIs to configure RxDMA and RXOLE
configuration to enable the PPE based routing.
Change-Id: I95b8fbb361402bc04fc1f38aa8b0dbc6f99f4f06
CRs-Fixed: 3147720
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Add Legacy interrupt changes for QCN9224 target. Added code to calculate
hif group for DP interrupts and initialize legacy interrupts for the same.
Change-Id: I1b2f81905d3ce840fea172b13cbd192f041913d4
CRs-Fixed: 3139986
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
As part of TX FW metadata V2 global sequence number based
and SVC ID based support added.
Change-Id: Iefee2c47ecbebf6edfec9a687ef67e0e270bbf06
CRs-Fixed: 3136931
Rate statistics are updated at both peer and vdev level in Tx HTT
and Rx monitor path.
As per peer optimization changes, macro DP_UPDATE_EXTD_STATS is used
for aggregation of extended stats and this macro is used for both peer
and vdev stats query.
With this approach, when user requests for vdev stats, then rate stats
for vdev are updated with the rate values of the last peer present in
peer list of vdev and this results in wrong output.
In order to fix this, add an API to update the rate stats for vdev
separately.
Change-Id: I546a130e84f7fd577b80ace24e1dbb71000c0698
CRs-Fixed: 3132195
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
