From Lahaina onwards, for compressed DSI output, widebus should be enabled.
In widebus mode, 6 bytes of data are transmitted per pclk.
For uncompressed output, widebus must be disabled to transmit 3 bytes
of uncompressed data per pclk.
Change-Id: I7fc0bdb2e1678152d57b4cbb8295063a2ba8ae73
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
There is lag or lead in the FPS during dynamic clock change,
along with the increment or decrement in clock. So, HFP or
VFP are adjusted to ensure a constant FPS.
Change-Id: I87ba7a185104a0f5f1d13734a7e487e728d6b2c0
Signed-off-by: Lipsa Rout <lrout@codeaurora.org>
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Add a generic API which calculates the horizontal timings based
on the compression type in case compression is enabled and even
for non-compression cases.
Replace the usage of the DSC macros with this generic API.
Change-Id: Ie9174c20adc51a0be7c9127529d41faa4b473b55
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add support for parsing VDC-m DTSI parameters and also
perform basic validation checks on those.
Change-Id: I4b13cf04b1500c3c801c227658cb787bdad6174f
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Change adds flag to identify dynamic mode switch with same
resolution and different fps. Block sending PPS command
if we hit this scenario, this optimizes mode switch time.
Change-Id: If5c86084cde641952fe294b512e937cfd1bb5479
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Adding debug, info and error prefix for log messages
in dsi files. To enable debug logs
run "echo 0x1 > /sys/module/drm/parameters/debug"
Change-Id: I438ac16954bd1d39450f8adeb7fb17f9ea6f8140
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change adds support for dynamic switching of dsi clocks
to avoid RF interference issues. Also with dynamic dsi clock
switch feature coming into picture, now populate the supported
refresh rate as list instead of providing a range. Modify the
logic to enumerate all the modes in dsi driver, taking dynamic
bit clocks, resolutions and refresh rates into account.
Change-Id: I5b6e62bc935cf2234bdd96fcb3c7537b4e735fff
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Signed-off-by: Yujun Zhang <yujunzhang@codeaurora.org>
This change ports the missing changes from 4.14 to 4.19
that were missed. It includes changes up until
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: Idfdfe891f146e389e3c65cc3fc4c98d93220e789
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to selectively enable clock gating for supported
DSI clocks using a new debugfs node - config_clk_gating. This
new node would be created for every display node. See below
for usage examples:
To enable clock gating only for BYTE clock:
echo 1 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PIXEL clock:
echo 2 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PHY clock:
echo 4 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for all clock:
echo 7 > /sys/kernel/debug/<display_name>/config_clock_gating
To disable clock gating for all clocks:
echo 8 > /sys/kernel/debug/<display_name>/config_clock_gating
To go back to default setting:
echo 0 > /sys/kernel/debug/<display_name>/config_clock_gating
Change-Id: I83713d86eb1b9675d40d51fc20de81cca0aeb1c0
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Change updates dsi clock calculations for command mode
as per recommendation. Now dsi clocks are tied to
frame transer time. Propagate correct frame transfer
time to hal to update mdp clocks and bandwidth needed
accordingly.
Change-Id: I46f9038622ddd47cc53c5f3d54229f69a7008c8a
Signed-off-by: Vara Reddy <varar@codeaurora.org>
DSI display may support video mode and command mode both and it may
support transition between these two modes.
This change adds seamless transition between these two modes for DSI
display by avoiding crtc enable/disable and panel power on/off
during modeset.
Change-Id: Id7ddaef7d1f0f7cc7d52283755bad53a246adec6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
