Currently Kconfig is missing configs, fix this by adding
missing config values.
Change-Id: I72e3ababd35281262302a3eaa91ec573fb613984
CRs-Fixed: 3495369
This change creates a new component for low latency SAP
and also does the init and de-init of this new component.
Change-Id: I4a8192feb6edb30b1898ef30675cbc01235a8e42
CRs-Fixed: 3482510
On some third-party platforms, we observe the memory physical
address below 0x2000 is allocated will cause HW/FW NOC error,
so this region memory should not be used by host.
This change will hold the memory if the allocated memory physical
address below 0x2000 until driver unload.
Change-Id: I11fb698d32e69852f1cb5c8eb99ead121b8db2f4
CRs-Fixed: 3419652
Since the qcacld-3.0 driver is not part of the upstream kernel, the
Kconfig has not been used for driver configuration. As a result, it is
missing hundreds of configuration options that are now supported by
the driver.
The upcoming Bazel DDK build infrastructure *will* use the Kconfig
file. In preparation for populating the Kconfig, sort the existing
options in alphabetic order to facilitate the addition of the missing
options in a subsequent patch.
Change-Id: I7a714d373ae601b8c6642c224aca6b64da618ecd
CRs-Fixed: 3487378
Change I66d159a1594f71fdf33f3e4b4e6be4840d7e140a ("qcacld-3.0: Include
change Ids in build tag") replaced the usage of CONFIG_BUILD_TIMESTAMP
with CONFIG_BUILD_TAG. However, that change did not actually modify
the Kconfig item, so do it now.
Change-Id: Id69a339a8d539b3cd5b455c411ae10652f6aa897
CRs-Fixed: 3487377
Changes I0045dcccd36524cbcd4253347c9e0a5704193c2b ("qcacmn: Combine
all NAN related flags with WLAN_FEATURE_NAN") and
If98ecaace17f8724e9c28325ef61e721f42e1d8f ("qcacld-3.0: Combine all
NAN related flags with WLAN_FEATURE_NAN") removed all usage of
WLAN_FEATURE_NAN_CONVERGENCE, but did not remove it from Kconfig or
from all defconfigs, so do that now.
Change-Id: Ib19f30d2be5c2ddaad13a2526442d3d7266e4754
CRs-Fixed: 3487376
Change Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb ("qcacld-3.0: Remove
feature flag WLAN_FEATURE_11W for pmf") removed all of the conditional
code for CONFIG_WLAN_FEATURE_11W. However, the actual Kconfig entry
was not removed, nor was the configuration setting removed from the
defconfig files, so do that now.
Change-Id: I0ba83841346fc47673231fba6aa22da9317caf09
CRs-Fixed: 3487375
The PRIMA_WLAN_OKC feature is not applicable to qcacld-3.0, so remove
the feature flag.
Change-Id: Ia0dcfd34c18c31ecb6a270ede6f398160772cef7
CRs-Fixed: 3487374
Flag WLAN_FEATURE_NAN_DATAPATH was added to protect NAN Datapath
related code, while WLAN_FEATURE_NAN_CONVERGENCE was added to
protect the converged code inside NAN Component. Since the
original NAN Discovery related code has now been moved inside
NAN component and NAN Datapath cannot exist without NAN Discovery,
keeping these flags separate doesn't make sense. Combine these
two flags with WLAN_FEATURE_NAN flag which is the original NAN
feature flag.
As a cleanup of NAN code, combine all NAN related flags with
WLAN_FEATURE_NAN flag.
Change-Id: If98ecaace17f8724e9c28325ef61e721f42e1d8f
CRs-Fixed: 2377375
Kbuild conditionally defines CONFIG_PRIMA_WLAN_11AC_HIGH_TP but then
never uses it. Since it is obsolete, remove it.
Change-Id: I4002197c3068c58e542ab0b7bcc55b642e04624c
CRs-Fixed: 2221850
Add new CONFIG_WLAN_OBJMGR_DEBUG flag in qcacld Kbuild for ObjMgr
Debug enhancements and use the flag to enable the existing
WLAN_OBJMGR_DEBUG CFlag.
Change-Id: I295c9b6822ab0c1396368ecc719b2ba1c8c834dd
CRs-Fixed: 2184785
Adding timestamp in version string is causing long compile times
for wlan project. Add option to avoid timestamp so that developers
can avoid long compile times.
Change-Id: Iaa5fd4f432549844ae319451cb43929a2d4b68ea
CRs-Fixed: 2064805
In order to get FIPS certification the driver will need to support a
userspace API and accompanying logic to exercise the FIPS WMI
interface exposed by firmware. Since this logic need not be enabled on
production devices, expose a configuration knob so that it can be
enabled or disabled on demand.
Change-Id: I979be0175ea89e9147b07b222f54a7c3fc23dbd9
CRs-Fixed: 2065002
If tx frame is ICMP packet, disable bmps for N seconds to avoid
latency of waking up from bmps.
Change-Id: I91f7748bfca81524637e0e4cc39ace5abf53f7dc
CRs-Fixed: 2044602
Enable UMAC converged southbound interface by default by removing
CONFIG_WLAN_CONVERGED_INTERFACE in Kbuild and WLAN_CONVERGED_INTERFACE
based API definitions in wma_main.c.
Change-Id: I3b849192b667e8c2f9fb628355c80b3d817f741a
CRs-Fixed: 1103247
Attach southbound interface. Each individual component is supposed
to define tx_ops and rx_ops function to attach with southbound.
Change-Id: I622a53ab76bc3bab3774e90569af53ad49b95053
CRs-Fixed: 1096553
Propagation from qcacld-2.0
Change hard coded RX wakelock duration into an ini configuration item.
Only aquire the wakelock for unicast traffic, and if the configured
wakelock item is greater than 0.
Change-Id: I46b946ddfeae510a5446ff4ab012c09e4964a50c
CRs-Fixed: 1068594
Add changes to parse DISA parameters received from
user space and pass them to firmware for firmware
to encrypt data and send back to driver. Also, add
changes to print encrypted data received from firmware.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1064970
Add new files for supporting NAN data path feature.
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: If12d15789659d04559a9d65d6b7016d4cc595fcf
Add ini parameter and feature flag for
DPTRACE to enable/disable as per requirement.
Change-Id: I80db65adb7b8e82d5ea75cceac742fd229d7a2b5
CRs-Fixed: 1008087
Correct the Kconfig entry that is used for the MCC to SCC switch and LFR
subnet detection feature. The Kconfig, instead of having the config name
is having the feature name. i.e, instead of having the Kconfig entries
as MCC_TO_SCC_SWITCH and LFR_SUBNET_DETECTION, the current entries are
FEATURE_WLAN_MCC_TO_SCC_SWITCH and FEATURE_LFR_SUBNET_DETECTION. The
make config process will add the CONFIG_ prefix to these Kconfig
entries.
Change-Id: I57f025f14bed73afeb411ea130ca88b5a4155a60
CRs-Fixed: 1000552
qcacld-2.0 to qcacld-3.0 propagation
Get tsf from fw. Provide ioctl interface cap_tsf/get_tsf.
Driver issue wmi cmd to fw to realize capture/get.
It can be used in station and softap mode. For sta, getting
tsf from connected ap. For softap, it will generate tsf by-
self
Change-Id: I00d30882bce2f49ee3de3fa189e094c04c0d9943
CRs-Fixed: 817527
Enable the packet tracker feature for non performance builds
by enabling the macro QCA_PKT_PROTO_TRACE and set the
default packet tracker log level to dump the DHCP, EAPOL
and management packet details. The necessary log level can
be modified using the ini 'gEnableDebugLog' entry either at
compile time or at run time using the IOCTL 'setDbgLvl'.
The logs are dumped using the same IOCTL 'setDbgLvl'.
e.g.,
To enable all the packet trace features
- iwpriv wlan0 setDbgLvl 0x0f
To dump the packet trace
- iwpriv wlan0 setDbgLvl 9999
Change-Id: I4fe82e0091517f0614baedf620976dd37b94a974
CRs-Fixed: 998642
Enable compile time featurization support for both LFR2.0
and LFR3.0 using WLAN_FEATURE_HOST_ROAM and
WLAN_FEATURE_ROAM_OFFLOAD respectively
CRs-Fixed: 978905
Change-Id: Ib5976cd0cd5a6e117a1334bfc73a043e36e25f77
Add Kconfig entry to control the MCC to SCC switch logic so that
the feature can be enabled when part of a built-in kernel.
Change-Id: I8a4297e245b2be1b1cca81cc10bdccdfd34f8941
CRs-Fixed: 986079
qcacld-3.0: Initial snapshot of ihelium wlan driver
to match code-scanned SU Release 5.0.0.139. This is
open-source version of wlan for next Android release.
Change-Id: Icf598ca97da74f84bea607e4e902d1889806f507
