Initial changes for ipq5018 compilation.
Added device ID and target type checks for ipq5018 traget.
Change-Id: Ib86a371fbe66749fcb6d114e7a4a9931b684e03d
Add HIF APIs to prevent or allow link to go into low power states. The
current implementation uses PLD APIs to make the needed configuration.
Change-Id: I22efb4bcf902f9aff674ed1872f4f23bef508aae
CRs-Fixed: 2602029
This is a public API, so move it outside to hif.h file so it can be
used elsewhere as well.
Change-Id: Ic870cf804df69f6d7bb5a792da662759d687e0ed
CRs-Fixed: 2616491
Some areas in other components are directly calling the kernel api
functions to perform runtime PM no idle operations. Create a new HIF
function to handle runtime PM no idle operations.
Change-Id: I8328bc74ccc8e8acd35d7d73ec4cc21094b8f5b2
CRs-Fixed: 2607721
Enable timer and batch count threshold interrupt for CE1, CE2
and CE5 rings through INI and retrieve the parameters through
psoc handle.
Change-Id: Ifa6cd768ed41ded46cae652ad7c910ffa62f2310
CRs-Fixed: 2593531
Change enable_runtime_pm from bool to uint8_t in correspondence to
changing CFG_INI_BOOL to CFG_INI_UINT for enabling runtime PM.
Change-Id: Ib5031ada43fac864d933cdfee875593f896b2a62
CRs-Fixed: 2603918
1. Add hif_force_wake_request API to wake the
mhi and umac before reading/writing the memory region
greater than BAR+4K.
2. Add hif_force_wake_release API to release the
PCIE_PCIE_LOCAL_REG_PCIE_SOC_WAKE_PCIE_LOCAL_REG so the
umac can power collapse again at a later point of time.
3. Add pci stats to dump the force wake status.
Change-Id: Ic6d5463ea0cdb28d9144be61da55e43033b53298
CRs-Fixed: 2478052
UMAC reo full condition is seen in slub debug builds in case of
DL throughput traffic. This is due to host process only 64 packets
per NAPI schedule in case of slub debug builds where in case of
perf builds budget is of scale 4 times. Also the time between two
napi schedules is in order of milliseconds which accounts for the
delay of host reo ring processing. So increase the napi budget
scale to 3 times which make sures host process enough packets per
napi schedule.
Change-Id: I3e134f31277a72056f3d7d5433ed1adeefa433fa
CRs-Fixed: 2563595
Add runtime pm apis to record last busy mark set by data path
during dp rx process.
Currently for mcl in some scenerios runtime sync suspend is issued
which puts the link in low power state with out waiting for link
inactivity timeout. This leads to throughput degradation in case of
rx direction as in rx processing data path extends the timer by marking
last busy to avoid immediate runtime suspend. But runtime sync suspend
does not take in to account of the link idle timeout value before
suspending the link. So using this apis, before issuing runtime sync
suspend check the duration since last busy mark by data path rx process.
If the duration is less than run time delay just do runtime put.
Change-Id: I694ef6ddec8f11fed44bf3b9e5ae18ad93b6ec24
CRs-Fixed: 2512326
The HIF_MAX_GROUP value is not consistent with the
HIF_NUM_INT_CONTEXTS which can cause out of bound access.
Fix this issue by making both these values same.
CRs-Fixed: 2505220
Change-Id: Ia79d9c03de82a73662c189e61e83e43e71d2ef3f
Add device ID change and target type checks for pine.
Also remove memory war added for Hk emulation.
Change-Id: Idf531a48a03202d4fb241a92a1d671ee2b94cfbd
CRs-fixed: 2453899
Changing return type of ce_send_single and hif_send_single functions
to return QDF_STATUS instead of int so caller can handle as needed.
Change-Id: Ifa0db300982e22c2784662492727923e4614c2b7
CRs-Fixed: 2468534
Runtime PM put sync API will make sure runtime PM suspend happen
right away if usage count is 0.
Change-Id: I70f6fe4ed015195874ef4cac61de9ef5d739b689
CRs-fixed: 2502382
1. Add ADMA channel registration APIs
2. Add ADMA support for TX and RX path
3. Remove async_task thread for ADMA, since transfer thread is
present in the SDIO AL layer
4. Move hif functions which are legacy only to mailbox.c
5. get_hif_device and hif_sdio_set_drvdata changes for mailbox and adma
6. Add rx buffer allocation offload work
Change-Id: Ie98b302176381035b1bd590ef35a977aeef4f09c
CRs-Fixed: 2274807
Printing ring stats from requesting txrx stats needs access PCIe link
so make sure it is resumed by doing a sync resume if it is runtime PM
suspended. Also response of h2t_ext_stats_msg from FW is not guaranteed
so tag it properly so that in HTC layer, corresponding "put" API will
be called right after sending the packet.
Change-Id: Idc5797b38557ed5779d920c72200b9d28769ab58
CRs-fixed: 2487521
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Move definition of HIF_CONFIG_SLUB_DEBUG_ON to driver Kbuild,
to cleanup CONFIG_MCL/CONFIG_WIN dependency.
Change-Id: I563d248413c98d7704e32ae06c260c02d915495a
Firmware will trigger WAKE MSI for both runtime PM and system
resume. There is no need to request runtime PM resume again if
it is a system resume. Check the flags to avoid doing so.
Change-Id: I70bdfadf1d7c0ffd4e2849458c6aee6931037cd3
CRs-fixed: 2479631
Add support to log the important events in
datapath, which will help in debugging the
datapath issues.
IRQ handler, Napi poll and srng access start/end
are the events which are currently logged.
CRs-Fixed: 2457854
Change-Id: Iba105b0e79443b670a01a929f999f94e00ea92f2
pm_runtime_mark_last_busy will extend the timer for runtime suspend.
Recording caller and timestamp can help to debug who may prevent
runtime PM suspend.
Change-Id: I4848a2558197e0fc9b7300421a5a1993817333e4
CRs-fixed: 2457803
For PCIe DRV (L1SS sleep) suspend, firmware will trigger a WAKE MSI
to wake up host so that request runtime PM resume for this case.
Change-Id: I959d3b1053b7aef5fe80889553958cf9394c8c38
CRs-fixed: 2450284
The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
Add support to measure interrupt latencies, store them
in different "bins" and display the constructed histogram
through user command.
Change-Id: I268be6b39745d550ac7db5d321c2d1fdb2d17d41
CRs-Fixed: 2365812
Local variable is used to store cpumask to send it to
irq_set_affinity_hint and qdf_dev_set_irq_affinity APIs.
This memory is used by the kernel later outside the
current contect resulting in invalid memory access.
Fix this by using global variables to store cpumask.
Change-Id: I086f40bf1b3499d2c2ccb1ce18140b2dc2761d04
CRs-Fixed: 2373548
Add support to handle Tx completion processing and Rx processing into
different NAPI threads/contexts for Lithium DP
Change-Id: I4f5c6ef3ce969ce457e26cf3e8305df1ae782f09
As part of WIN BMI modularization, hif_bmi_register_callbacks
are removed from if_pci.c in qcacmn project. As a result,
MCL needs to invoke hif_bmi_register_callbacks in qcacld project.
Fix is to define hif_bmi_register_callbacks for SDIO and USB builds
so that SDIO and USB products can build when WLAN_FEATURE_BMI is
defined.
Change-Id: I559af0205dd4671214a8d7f2972fdba379e10b6a
CRs-Fixed: 2332250
Add new target type for qca8074v2 and extend target
type checks of QCA8074 for QCA8074V2.
Change-Id: Ib3ff4505e2057fc843b492b9720004dcac042a65
CRs-Fixed: 2292271
1. Allocate and Initialize host and target copy engine configuration
for QCA6390 based products.
2. Setup Copy engine service map for QCA6390.
3. Add conditional compilation flag QCA_WIFI_QCA6390 to support
QCA6390 based products.
Change-Id: Ia4dd4d436b8ecae0e9f91faa0c1fe7dbd14f001f
CRs-Fixed: 2259312
Enable CE schedulign logging feature such that each CE
activity can be recorded for debug purpose. Previous commit
I68a765c6219a2ff2a6a7adc7e8ed031f8957d243 has broken this
debug feature. Fix the CE scheduling logging feature properly
such that its available in SLUB debug enabled builds.
Change-Id: I24ca711378ecda8a8563fe3899fae16ca032f29d
CRs-Fixed: 2272459
1. Modifications for SDIO HIF interface with stack.
Mailbox based devices do not use the SDIO abstraction layer.
So, devices like QCA6174, QCA9379 etc are to interface with
the SDIO stack directly, even if the CNSS wrappers are used.
ADMA based devices use the SDIO abstraction layer. So, devices
like QCN7605 do not interface with the SDIO stack directly.
2. Remove redundant osdrv layer and refactor the functions
3. Propagate hif context to all the interface functions in hif
4. Remove duplicate hif object allocation (scn) in SDIO hif
Change-Id: I75cfe97b1ef913d1a3e6e556ec5eff796eb9f1d9
CRs-Fixed: 2271110
1. Move mailbox transfer dma definitions to mailbox.h
2. hif_configure_device changes to make it more generic
3. Add address fixup function
Change-Id: I12bdf8b07350411093ba35071411525a8333cf93
CRs-Fixed: 2252417
API for dumping the CE descriptors copies all descriptors for
the given Copy engine id and also copies the SKB packet pointed
by the descriptors till smart_log_skb_sz bytes.
Change-Id: I511bda77319944c1ec2377f716087956ce0637ac
CRs-Fixed: 2008290
GRO aggregations are hanging out of NAPI instance and we cannot use the
hif NAPI instance in Rx thread as gro_list inside NAPI is flushed out
at the start and end of NAPI poll, this will corrupt the gro_list on
which rx_thread is working. Address this concern by creating dummy
NAPI instances mapping to each hif NAPI and by not scheduling them.
Change-Id: I517c4c6158ed3ac073f5f617afde46c7ed07ff3e
CRs-Fixed: 2128457
Change ce_service_max_yield_time ini to us granularity to have
yield time of us order as well.
Change-Id: Iae31be810dd42273a4f0546ba2b76e89e23b9329
CRs-fixed: 2086190
Add API to set ce service max rx indication flush num
during load time for handling of messages in CE based on
ini configured one.
Change-Id: I49c3d6ebac34076cd5ad5e352e78d2fec7c8ee89
CRs-Fixed: 2068375
