1.Enable undecoded metadata capture feature for york radio.
2.Added support to extract and handle Phyrx abort request and reason
for york target.
Change-Id: Iae42c9f1bbce63d28983f87b3282264c6a4230cc
CRs-Fixed: 3432389
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/li folder, so fix them.
Change-Id: I4ac9d051ac1ba23ddeecdf1b1bb88b939956795e
CRs-Fixed: 3390587
Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
For 802.11 Fragmented frames, currently there is a
generic GetFrameControl API from RX TLV for all Li
Chipsets. As the offset for frame control in RX TLV
is different for QCN9000 and QCA8074V2, reading the
frame control with generic API gives wrong frame
control value. The Offset is different as the size
of RX_MSDU_START struct is 8DWORDS in QCA8074v2 while
it is 9DWORDS in QCA9000. In the reo reinject path
the destination queue descriptor address read from ring
descriptor address is Invalid
Fix is Separating out the GetFrameControl API from
generic API to Chip specific API. Also fix the reading
of queue descriptor address.
CRs-Fixed: 3280809
change-Id: Ifc5eca31b9b7e70c84ca455d56a58c27601cd51d
Hal layer changes to handle Umac post reset
and post reset complete events from firmware.
Change-Id: Ib25427930aab25650731c87b38e2ef7e47ae98d9
CRs-Fixed: 3267222
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
Add change:
1. Extract phyrx abort and phyrx abort reason error
code from PPDU END TLV
2. Extract additional necessary fields from L SIG,
HT/VHT/HE SIG TLVs
Change-Id: I3b05009cdc7ce7b585c00d1690ad238b9e6a88b2
FISA is not supported by qca6390 and hence there are
compilation failure in FSE access.
Fix these compilation issues for qca6390.
Change-Id: I611b7e2068ad260a41add9b8bd5ab7a5345e8152
CRs-Fixed: 3103337
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
In order to support flow overide feature,
AST table has to be split between RxPCU and DDR.
With this split, RX monitor cannot make use of
ast_index to fetch peer as it is not from DDR.
So make use of sw_peer_id to fetch peer.
This sw_peer_id is derived from RX_MPDU_STAT_START_TLV
Change-Id: Ib2a003a2640fded3287c318d2ad59fd3127af9b6
CRs-fixed: 3004363
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
HAL generic APIs which use HW definitons that
do not have same value across all lithium chipset
are moved to header files. So that these will be
compiled with appropriate header files
Change-Id: I6c167afa4212c5e884f5e18ff1ccb3bbbba8f5f5
HW macros used for hal_rx_wbm_err_info_get_generic_li are
different across chipset. Move this API to header file to
ensure chipset specific HAL is compiled with appropriate
HW headers
Change-Id: I053d243235f187d931048d1fd22293f9142a00c7
Add the changes to the generic HAL APIs.
The APIs generic across lithium and beryllium
architecture are kept in common HAL code.
The APIs which are generic across lithium
chipsets are moved to lithium specific files.
The APIs which are generic across beryllium
chipsets are kept in beryllium specific files.
Change-Id: Ie5e28aca5de02aa42f63b4a13fcb1cb32ffa8a28
CRs-Fixed: 2891049
