Low memory profiles like 256M and 16M profiles support
only NSS Wi-Fi offload mode and HOST data path APIs are
not used in NSS offload mode
Disable HOST data path APIs which are not used in both
NSS Wi-Fi offload mode and in HOST mode (in NSS offload mode)
CRs-Fixed: 2831478
Change-Id: I6895054a6c96bd446c2df7761ce65feef662a3cc
FW uses CCE rule to exception all mcast/bcast frames. Ast_idx
override does not help in sending them to TQM directly.
Change-Id: Iad6c1e8073f5c5d0513adb7097d5024177b7b7f5
currently qdf_nbuf_len is being used to get the length of
the tx pkt, but this API also interprets the nbuf CB field
to adjust the length if extra_frags are present.
The concept of extra_frags is applicable only for legacy
drivers but in lithium as cb is not reset in the driver the
qdf_nbuf_len API is mis-calculating the length if extra_frag
field in cb is set by any network stack protocol.
To avoid this qdf_nbuf_headlen API is used to get the length
of the TX pkt.
Change-Id: Ie1e0b4b2168daf93ae77f4c995f5c3476a27b433
Use AST override feature to send out multicast packet in
4 address format. Pass per packet peer_id from osif layer.
Change-Id: Ic86120169c89e7972caa3cc8c967de72670314d0
CRs-Fixed: 2775051
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
dp_tx_pdev_detach API takes care of flushing
tx descriptors and multicast enhancement mem
cleanup
dp_pdev_deinit takes care of cleaning up the
above actions and dp_tx_pdev_detach is simply
a redundant piece of code
Hence remove dp_tx_pdev_detach API and call
dp_tx_desc_flush directly from dp_pdev_deinit
CRs-Fixed: 2769303
Change-Id: Ic798793e81eefc7dc905ca7552fdca13e9fddd8c
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
In tx desc store vdev_id to avoid unprotected access of
vdev memory.
In tx path pass VDEV as argument to all APIs
In completion path get vdev from peer as vdev reference
in peer is protected with reference, in places where peer
is invalid get vdev object using vdev_id stored in tx desc
with a reference count
Change-Id: I364ebb51143218872c0bc6f856772ab1df00bb17
Currently, when an extension descriptor is used during TX datapath, we
use HTT metadata length + msdu extension descriptor length, even we
do not fill HTT meta data. This is inefficient and hardware will end up
doing DMA of extra HTT metadata, even when not needed.
Include length of metadata in TCLdata command only if HTT metadata is
filled in.
Change-Id: Idd1b053c1c6bd8b39880efe5743980667454df0d
CRs-Fixed: 2738733
Tx desc flow pool for the vdev is not deleted as part
of disconnection due to tx_desc pending to be processed
in tx comp ring. Hdd_stop is triggered immediately after
this causing dp vdev detach. In parallel, the tx desc
from the tx comp ring is processed, wherein stale vdev
address is derefernced to get dp soc causing page fault.
Fix is to reset tx desc by setting the vdev to NULL as
part of dp_tx_delete_flow_pool and also reset count to
zero in dp_tx_comp_handler before ring desc process loop.
Change-Id: I66f718668ba84f89106d09e624d9593f89479e55
CRs-Fixed: 2683874
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
Lot of checks in Tx completion path are for special handlings
such as when ol stats are enabled some protective debug checks etc..
Add a logic to fast free of buffer at transmit completion.
If extended stats not enabled(Typically needed for enterprise cases)
do the buffer free faster. This is controlled through a flag.
Change-Id: I04873b5e3643d8e93e5b248fcaf23504dcb7624f
For 4 core CPU system, Tx access can be made lockless by associating
one Tx ring per CPU. Three Tx DATA rings and one SW2TX command ring
can be used for sending data to Tx.
Change-Id: I6e38cad52dffa4e46ff2b736cd6b949d061fa2a4
Enable SW2TCL_CMD ring for data on QCN9000, QCA8074 V2/V1
and IPQ6018 targets.
Enabled 4th Tx ring for data enqueue to HW.
Transmit completions for packets from CPU0 and CPU3 are routed to
WBM2SW Completion ring 2.
WB2SW completion ring2 is mapped to CPU3.
Change-Id: Ied4c4704e1f8623e909ad45c547a611de26c7ec5
Memory optimization of unused TX rings by not configuring rings that are
not being used. Configure 2 rings for host in the case of IPA, instead
of configuring 3. If IPA is disabled then configure only 1 set of TX
rings for host.
Change-Id: I251606c728f3020a13e45e8c8386970c8a641f0a
CRs-Fixed: 2530572
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Add a check to drop unicast frame being sent to same originating
VAP after hmmc conversion of IGMP control packets
Change-Id: Ic25812a7848af793075a0cb483100ebcf59d85b2
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Add code to use cdp_vdev instead of void pointer for
API dp_tx_send_exception and dp_tx_send_mesh
Change-Id: I63ca5a62c2a8cd6feb906181702888814650dfce
CRs-Fixed: 2480836
Tx completion stats should be counted per wbm ring on tx completion
and not globally. Similarly, rx stats should be counter per reo ring.
Change-Id: I1e4af0d38b23e60de78ca03316861db08ff0811a
Move WDS feature specific APIs out of common code
as these features are WIN specific. Keep the usage inside
common code under feature specific flags.
Change-Id: Id907a5e22c27fc47e8314449e154525684a27e85
The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
VOW stats is an extension of regular stats to capture
all drops per TID. Delay counters per TID are also
included.
Change-Id: If6087f37b32cf9ae4bb405190a358ad3c9750dd2
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
Add support to process HTT completions sent by FW for multicast/broadcast
frames sent in TQM bypass
Change-Id: If3fca3384156ce93f719bf15ef14b98ea4974f92
CRs-Fixed: 2301453
Currently peer reference is used with out taking any ref count.
In parallel context execution on different core peer reference may
be cleaned up in peer unmap event. So take ref count while using
the peer reference and decrement after done with it.
Change-Id: I02ca172cbdc4309fabd3bbbad00940826662bbd3
CRs-Fixed: 2301963
"(" character should not appear in macro parameter list. Remove
this illegal character to avoid compiling error.
CRs-Fixed: 2239574
Change-Id: Ie50feb5dacda52edb0b1a4fcdfd516e909c7bda8
