This change takes a snapshot from 4.14 to 4.19 as of
commit 47d149c31967 ("drm/msm/sde: Add null pointer
sanity checks").
Change-Id: Ib40428c562c3561c8a20d9849f16d13151496005
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
SDE driver triggers the frame and waits for the
ctl_start interrupt for command mode display. This interrupt
provides confirmation that hardware has picked up the
frame. Retire fence signaling is associated with
this interrupt and it is sent at the rd_ptr interrupt
after ctl_start. Due to lut dma delay, ctl_start interrupt
may be trigger before rd_ptr or after rd_ptr. SW manages
this complexity and handle retire fence for different cases
with 500us threshold logic.
This change replaces the ctl_start interrupt with wr_ptr
interrupt by programming it to trigger at 1st write line
count. This is guaranteed to come every time and it is close
to rd_ptr interrupt. That allows retire fence trigger at
wr_ptr interrupt and simplifies the SW logic. CRTC commit
thread would be held slightly longer with this change
as the wr_ptr is always close to rd_ptr and after
ctl_start.
Change-Id: Ic47a8f82c854b4aded0d70c95af853b28a68ffd6
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Fix the crtc status to print the formatted src
rect for all the planes and log the true inline
rotation flag. Move the event log in splash cleanup,
so that it is not logged for every frame.
Change-Id: Id2a323254f632a649c335455f5ef53b7d805c3a5
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
DSI display may support video mode and command mode both and it may
support transition between these two modes.
This change adds seamless transition between these two modes for DSI
display by avoiding crtc enable/disable and panel power on/off
during modeset.
Change-Id: Id7ddaef7d1f0f7cc7d52283755bad53a246adec6
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
On the first commit, cont splash flag is still enabled on
encoder, but connector is not yet attached. When a check-only
rm reservation is made, it does not get released due to
cont-splash check. If cont-splash is enabled, rm should
not check for connector, but directly release rsvp_nxt.
Change-Id: I79be3c1bb20b74ce4a95786c90f3accfb587d7f2
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Userspace is not supposed to request vblank until crtc is enabled,
because drm framework rejects the request if crtc is not enabled.
Any vblank request prior to that need to be cached in the userspace.
Hence removing the cache logic from the downstream driver.
Change-Id: I5383e39075377e3e49b8d335598ddfa48ab54666
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Current sde driver allows vblank enable and wait requests
even after crtc is disabled which would eventually lead to
enable of irq and timeouts in caller context. This change fixes
it by updating vblank callback status as 'on' during crtc enable
and shutdowns vblank callbacks before crtc disable is complete.
Change-Id: I9085103ced06e5fad51219f26bd8dd655fa36fea
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.
Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Update the bootloader set core-clk rate to the SDE software
structure when continuous splash is enabled. This will
make sure SDE handles the shift in core-clk rate correctly
when user-mode votes for a different rate with the first
frame.
Change-Id: Ib8e11332578ad154b14793d8ddcfec488be63aef
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
When continuous splash is enabled, connector states
are not properly updated with the encoder associated
with it. This is by design, so avoid all making
such request there by avoiding unnecessary errors
during the bootup. Fix a handful of warnings in
the PLL definition files
Change-Id: I7f08c5ff80ea2a2bfb4b19f2ea13c8f9cbb833e8
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
