IPA team wants to allocate more buffers and the IPA ring
should be able to hold them all since ipa doesn't have
an error path when the copy engine is full.
Change-Id: I30b8970ce59c7eb4e6a38170a56d6e00e88737fc
CRs-Fixed: 2011766
In one log the rx ring is depleted in 2.4 seconds
durring a prolonged period of memory contention.
Double the rx ring size to allow 5 seconds before
the wmi ce is oom.
Change-Id: I2e9a6caeee10f317bd3d70b770fcae3ad2d96623
CRs-Fixed: 2015778
Upper layers are failing to block disallowed traffic durring suspend.
Hif can enqueue the messages on the ce rings without letting hardware
know they are there. When fw is ready to recieve non wmi packets,
hif can inform hw of the queued packets.
Change-Id: I32810d9548416021c1da4f48a4ac539f75f1d907
CRs-Fixed: 2003582
Since new wmi API to allow components to move to common event id,
add related changes to use common wmi event id.
Change-Id: I60310238e0f216e6b52d3219c46f613935a9655f
CRs-Fixed: 1095299
Since new wmi API to allow components to move to common event id, P2P
add related changes to use common wmi event id.
Change-Id: I67b9fb7cba992b06ffdfc09a1243e6f5f2c29fed
CRs-Fixed: 2025109
Add a temp changes to support ROC with new scan module. Now new P2P
component lunch and revert this change.
Change-Id: I133c80bf73cee70ac39d9a7a62791ddb6421914b
CRs-Fixed: 2023647
If netlink_unicast() fails it already frees SKB buffer hence
do not double free the SKB when netlink_unicast() returns failure.
Change-Id: I2aa99c47f99c573abbd281c06ff58fcb38aad76b
CRs-Fixed: 2022800
This is a change to init and de-init P2P component in host common. Add
P2P component name in qdf trace.
Change-Id: I0a9d56afe851e3414bf860bed944c4e0fe661fbc
CRs-Fixed: 2006260
Add new API to unregister event handler to allow
converged components to move to common eventid space.
Change-Id: I97f096ff3e36bc7923718498c535fb6c3c50e7e7
CRs-Fixed: 2023157
Window size needs to be incremented by 1 since fw needs to
represent a value of 256 using just 8 bits.
Change-Id: I18cdb6fb928f28893dc0e1fd2fb574a12ca53972
CRs-Fixed: 2025197
Emulation being clocked at lowest rate,
SCAN and serialization timers are modified to handle
these scenarios
Change-Id: Ia937930483dbcd0268fd2fe2d0393e49f09b215f
CRs-Fixed: 2009490
Use correct dev_id in free_irq and add conditional check to avoid
access to registers not present on 8074 soc emulation.
Change-Id: I60055b8426b1941fca1b2f238d4e26b47ead54f9
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
Changed the data type to store stats to 64bit
from 32bit to support larger number for stats
counter
Change-Id: I25eca626623503663b6aa8436217413609e2a807
CRs-Fixed: 2024225
Acked-by: Chaithanya Garrepalli <cgarre@codeaurora.org>
Update legacy fixes in new policy manager component:
1. Avoid race condition to get pcl while stopping P2P GO
2. Add 160/80+80 MHz support for STA mode
3. Fix SBS is set to true by policy manager in SCC mode
Change-Id: I161ebe382915a6d9eefd6b4e3e2158ff14ad02c1
CRs-Fixed: 2009818
Add NULL check for pPacket returned from htc_packet_dequeue before
dereferencing it.
Change-Id: I30c4fb3a4bc6652396795305c3b8a23bba88922a
CRs-fixed: 2009829
Change calls to qdf_dma_map_nbytes_single to qdf_dma_map to match with
qdf_dma_unmap used in tx completion path. Also fix the dma_addr value that is
passed to Tx HW; we were incorrectly subracting pkt_offset instead of just
subtracting alignment bytes from dma_addr
Change-Id: I2d6f32bd44e02824a1a788e3624dcb3680f1b242
CRs-Fixed: 2004658
After updating the skb with meta header cache flush is not happening. This
is sending incorrect meta data to firmware. Fixed this by doing cache flush
after meta header updation in skb.
Change-Id: I0952093e3080f5b8ec2233e6ab1edf4f48351603
CRs-Fixed: 2003389
At this point lot of Win code already uses QDF_TRACE macro. It will be
difficult to translate QDF_TRACE to qdf_trace_msg unless all the modules
(already using QDF_TRACE) make changes to use the qdf_print_ctrl
framework. Until that happens, we can have a shared object temporarily
so that wlan_log_to_user and hence user space logging of messages can be
in place
Change-Id: Ia149b86de8c2c36ed1c8508570b31db25f6bc41e
CRs-Fixed: 2018767
Ampdu count is populated in pdev
but zeroed before printing. Fix it to
be populated in peer and aggregated
in pdev before printing
Change-Id: I51d8f1968a87c0b9dbf53928acd1bbef45acc7ec
CRs-Fixed: 2025785
Support rx p2p public action frame and extend the roc timer for
special frames. Also add scan requtest paramters when trigger scan
request.
Change-Id: I295bdcf9c5ff78320cbe600a483d245d38d05c06
CRs-Fixed: 2024412
Due to different layers, TLV processing is confined to WMI folder.
Therefore, move the TLV layer processing of WMI_REG_CHAN_LIST_EVENTID
to the wmi folder.
Change-Id: I7e7182997a9506035030f33d2f81a403fbe97a2f
CR-Fixed: 2019750
Add event handler for WMI_REG_CHAN_LIST_CC_EVENTID.This handler
would be called from psoc_open object manager framework
initialization.
Change-Id: Icfd52fdb7056fdb77afdbd1be576d160719b7285
CRs-Fixed: 2002892
Add dynamic rules registration callbacks which needs to be registered
by each component during its initialization phase.
These callbacks are used for serialization component to determine
whether serialization request can or can't be honored.
Change-Id: I02000426527bc7611cb9bb1d0ee26f3c03d9f2d1
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Include Hawkeye emulation PCI device ids in hif_pci_enable_bus to
support PCI based emulation platform to support multiple nodes.
Change-Id: Iddc4c92a39713e27386c6f9cf64b5efd34b3ba44
CRs-Fixed: 1090092
Objmgr vdev_create event does not guarantee vdev creation in firmware.
Move any PMO logic that would normally go in the vdev_create event, but
needs to communicate with firmware, to a new vdev_ready event handler.
Change-Id: Ifbc2aed26a511733b31c816b9e6c4359d39910e6
CRs-Fixed: 2020696
Refactor flush rx queue function call based on soc by adding an
interface to CDP funtion indirection table.
Change-Id: Iea201553f555a6c317cf37e586433aa493e51623
CRs-fixed: 2023399
Add a legacy callback to get the type of a non connected vdev
needed by policy manager.
Change-Id: Id3622d5c808c8e0f3b24b257b5899f925dc36b1f
CRs-Fixed: 2009818
pld_disable_irq is a no-op for PCI devices, causing unit-test resume
to fail in some cases. Define new IRQ disable/enable API's in HIF for
unit-test suspend/resume to use.
Change-Id: Ib3e6007025e791c867463c7d9f64512628c4ca0b
CRs-Fixed: 2023978
