Currently driver supports only one name for an ini parameter,
there is no aliasing support for ini names.
With this change add support for multiple ini names for the
same ini parameter.
Change-Id: Ib16a258975f5c3d152fa1dfbbdb6b3e6cc222784
CRs-Fixed: 3007156
Currently there is mismatch in time-stamp source for
hif_hist_skip_event_record with respect to hif_hist_record_event
Updating time-stamp source in hif_hist_record_event to match with
hif_hist_skip_event_record time-stamp source.
Change-Id: I55680c40860eafb5c6ed6117ab7c55bb38cc24bb
CRs-Fixed: 3000319
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
Currently driver reset self OCV capability from RSN based
on AP capability which is not required as it may lead to
failure of wifi-cert test case 15.1 that is sta should
advertise self OCV capability irrespective of AP capability.
Fix is not to reset OCV from rsn based on AP
capability to support OCV.
Change-Id: I24cda586ae0f364bb4eb2936985194e01f74875b
CRs-Fixed: 3002963
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
Use lb_edge_bins->start_bin_idx as the bin_pwr array start bin
index, when left band edge extra bins are present.
In all other cases, use the detector start bin index
detector_info->start_bin_idx.
CRs-Fixed: 3005949
Change-Id: Ic91c3eb386d693b3f929c687e269e882b6bd8f59
The per-session detector map is keyed by detector ID
from the Spectral FFT report and is only valid for one
session, ie. start scan to stop scan.
There is a possibility of receiving FFT report with
an invalid detector ID, for a particular session.
Due to this, invalid detector map information may get
accessed.
Verify that detector ID received in Spectral report is
valid for given spectral scan mode and channel width,
by checking the detector list.
Add a validity flag to the per_session_det_map, and check
whether detector map is valid for the detector ID used to
access it.
CRs-Fixed: 2998410
Change-Id: I1f38ae22b458bb1fea62b99422ec60095071b3c6
CE buffer size update to support 3.5k beacon template &
probe response on Pine and Spruce targets.
The support is disabled on low memory profiles including
512M as there is no skb recycler in these profiles.
Change-Id: I451f11d6a20d1246b3e16221f2fb7ebd234b284a
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation.
Change-Id: I147ac8365f3c99c6231df589ac17d39122d57362
CRs-Fixed: 2987496
Write two new functions to check if preCAC and RCAC are supported in the
current DFS domain.
Currently, the preCAC is supported in the following DFS domains:
1. ETSI Domain
Currently, the RCAC is supported in the following DFS domains:
1. FCC Domain
2. MKK Domain
3. MKKN Domain
Change-Id: I2996e4d5b26e1a57ebb00e415fa41108af997b21
CRs-Fixed: 3005416
Currently in function wmi_extract_dbr_buf_release_entry,
num_buf_release_entry & num_meta_data_entry are copied
to direct_buf_rx_rsp structure without any validation which
may cause out of bound issue if num_buf_release_entry or
num_meta_data_entries provided in fixed param becomes greater
than actual number of entries.
Fix is to validate num_entries and num_meta_data before populating
param->num_buf_release_entry and param->num_meta_data_entry.
Change-Id: I18050fd4f90f8815d7eceb5f715fdbaa09130d3a
CRs-Fixed: 3000875
Disable CP Stats for Beryllium emulation environment. These stats are
invoked heavily by userspace and need to be retrieved from the FW.The
userpace is holding the rtnl_lock while invoking these stats. This
prevents any additional commands to be sent while a stats command is
pending. Since in emulation environment, the turnaround time is quite
high, no iwpriv/ifconfig/iw command can be sent while the CP stats are
pending, making the driver in accessible from command line.
Hence, disable CP stats by simply returning 0 to the caller in emulation
environment.
CRs-Fixed: 2984362
Change-Id: I80aee6ce2bed1c37b964dd5e7194a66287301355
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
In HMT, pktlog, which uses CE5 traditionally is disabled. Hence donot
configure any entries in target_ce_config.
Change-Id: I31a075fb9c6557599688408ba9452704c7522ec0
CRs-Fixed: 2984362
In dp_service_srngs, the current logic assumes that WBM2SWRELEASE ring
number as obtained from interrupt_ctx->tx_mask matches the index of
soc->tx_comp[] array. However this may not be true, esp for HMT.
Add logic to fix the same.
Use a separate macro to enable use of single TX ring.
Change-Id: I1bee27b800ad4e4ab1a1fe5e2b01b5b43acfe1f7
CRs-Fixed: 2984362
Add length sanity check for ibf cal value & phase delta
to ensure HOST always align with target defined length.
Also remove the REPORT_AOA_FOR_RCC flag usage.
Change-Id: I06e4a430143df1534849b8ec974e38932cff3ef1
CRs-Fixed: 2997030
Change Ia0676c03cef9c7b010762326e535477beefe36ac added a few extra space.
Remove them.
Change-Id: I5780e3a377c0f4272d6b377015ec80449cfc4f5a
CRs-Fixed: 3005569
In change Ia98b97f4cfe47dcd94bfa54f3dd7be13c8696532, the function
'reg_psd_2_eirp' is defined twice:
1)when WLAN_FEATURE_11BE defined
2)when WLAN_FEATURE_11BE is not defined.
However, both the functions are same except that (2) has the following
statement of 3 lines(marked by lines beginning with '>>'):
>>case BW_320_MHZ:
>>ten_log_bw = 25; /* 10* 2.50514 = 25.0514 */
>>break;
and (1) does not have the 3 lines.
Both the functions require identical updates for their the common part.
However, it is very likely to miss updating one function and update
the other function. Or do different updates for the common part.
Similarly for the non-common part, the function that does not need the
non-common part also may get updated. Therefore, having multiple
identical function bodies for the same function under conditional
compilation is not a good design choice.
Convert the mapping (psd+bw -> eirp) done through 'switch case' into a
linear search through a lookup table. Refactor the code so that there
is only one function body and the non-common part moves to the lookup
table under the conditional compilation.
Change-Id: Ic2c6e7dff5a2fed9d1c6624b042d2be023cafcfc
CRs-Fixed: 3005569
Add assoc_peer field in struct wlan_objmgr_peer_mlme.
Provide API to set/get mldmac of peer
Provide API to set/get assoc_peer of peer
Change-Id: If3e84ea6512ab45a53d616e52b64ebcea08ddda6
CRs-Fixed: 2987463
Add pdev data structure definitions for MGMT Rx REO module.
Add a pointer to an object of that type inside the pdev
context of MGMT_TXRX component.
Change-Id: I5214be24d776d8d1c14b3b81c89c0c0fde2654b7
CRs-Fixed: 2959074
Add new field ema_init_config to signal the configured value of
beacon size while using MBSSID feature in 6Ghz.
The current allowed range is 1500-3500 bytes.
CRs-fixed: 3004041
Change-Id: Id8cc1b7e4602b2e52b8eb215337070c6e3c26089
Add P2P_P2P_CONCURRENCY_SUPPORT service capablity to
validate whether fw can support p2p concurrency
support or not. when firmware advertises this flag it
can support MCC,SCC, DBS for p2p-GO/GC + p2p-GO/GC.
Change-Id: Ifec4bf984595b06374be9024601733c8537a9c3e
CRs-Fixed: 2984165
With the current implementation, the 5.9 GHz channels are disabled in
reg_modify_chan_list_for_5dot9_ghz_channels if the chipset is not a
FO chipset.
Put the check for FO under the macro CONFIG_REG_CLIENT which is enabled
only for STA target, as for AP target we need the 5.9GHz channels to be
enabled in the legacy chipsets (non Lithium) if the bdf bit is enabled.
Change-Id: I97c8b4f5140ecf635f1203bf43b29c294cd8a751
CRs-Fixed: 3001808
Update the invalid freq print with the actual frequency value for easier
debug.
Change-Id: I4e5bafaf902e19f4d070a7b140a2317a0988abf6
CRs-fixed: 3001345
In WBM error path, add handling for packets received with
rxdma_psh_rsn as rxdma_rx_flush. Also add assert for packets
received with an invalid push reason.
Change-Id: I4e445d52f00bbbdca358225aef488da0e8dccaa7
CRs-Fixed: 2978262
Add a function pointer to a function that converts host vdev param to FW
vdev param.
Change-Id: I01557d8bd87cb82548114626ff726aabba01dd19
CRs-Fixed: 3005160
Add debug prints when parsing the EXT chan list update event to dump the
reg rules received. The regulatory info is often updated and new bugs
are introduced every time so the prints will help narrow down the issue.
Change-Id: I229fa2e1432786c9a530f3a6035926135b2c4e2f
CRs-fixed: 3001297
Currently, we are Flushing fragments for peer as part of rx defrag
clean up. There is the possibility that frag flush is called while
we are accessing frags in rx defrag store fragment path in parallel.
Which will cause access after the free issue.
Adding lock in rx defrag store fragment path to avoid any
parallel flush while accessing the frags.
Change-Id: Ic27caab58429d776449f4b774eb7163ffa6215ac
CRs-Fixed: 2995156
It takes long time to init DBR, so add more log to trace the time when
exit target_if_dbr_fill_ring.
Change-Id: I9ec76c92db209a44c277b0f9e1840e6dd0132559
CRs-Fixed: 3002654
