Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add WMI ops for SAWF WMI commands
1. Config service class
2. Disable service class
CRs-Fixed: 3118070
Change-Id: Ie21fcfb1f25d2195eee679307e8970ccdda9992f
Add debug prints to display the parameters of
WMI_VDEV_SET_TPC_POWER_CMDID sent to the target.
Change-Id: I4759d04d2b9293d7f5f61c173679f8fb2b7ff941
CRs-Fixed: 3130926
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Currently whenever the wmi message is allocated the wmi header
length is also added to check with against the max size supported
by the firmware, there is no need to add the extra wmi header size
as the max length shared by firmware has the wmi header size
included.
Below is the breakdown:
Max CE2 transfer size is 2048 bytes
HTC header is 8 bytes
WMI header is 4 bytes
Max payload can be (MAX CE2 Transfer size - (HTC header+ WMI header)
(2048 - (8 +4)) = 2036
During the htc handshake this max wmi length is recevied by the host as
2040 bytes which is including the wmi header so host adding the extra
4 bytes is redundant and can be removed.
HTC buffer->actual_length = 2036 + WMI(4) = 2040 bytes
Change-Id: Ib958a938506c5c96347dec5304ca30aa8690d459
CRs-Fixed: 3130493
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
Extract information from wmi event wmi_vdev_quiet_offload_eventid and
send it to mlme
Change-Id: I49ef7f2811c5975a95e8e33050977c49e2b104e4
CRs-Fixed: 3101974
Currently, WMI APIs do not support new TWT public structures.
If the TWT componentization feature is enabled, then extend the WMI APIs
with TWT componentization structs.
Change-Id: Ic987960e880376066b81881dc32ec96faf609cc6
CRs-Fixed: 3085377
Rename wmi EHT MU/BE config defines in generic way instead of
having BF in all defines.
Change-Id: I3da2587582556ccda5f1d957faf04aa1a104acc4
CRs-Fixed: 3097171
- Add wmi pdev param ids.
- Add wmi ops to send set retry thresold, mcs drop value
and probe intervals.
Change-Id: Ic316337244e8fab07e7ed214c5fe62bf43a827d4
CRS-Fixed: 3126266
Add SAWf to init resource config to communicate
to the FW to either enable or disable Service Aware Wifi
Change-Id: I8285e383cb464c506e98e3a88dd267dae4b96558
CRs-Fixed: 3101373
There is a difference in the macro used in the
MLO multicast macro used in control path and DP
Changing the macro to be the same as DP code.
Also fixed minor issue in the MLO mcast WMI
identified while testing with the macro enabled.
Change-Id: I0c24a69628336f74d627863dd4bd4c4bef685b6c
CRs-Fixed: 3102733
When validating MMIE, if PN error is found, track it using relevant
statistics. Defined WMI_HOST_RXERR_PN to flag such PN errors.
Change-Id: Icb1fe9a653f67611539b5cb463adfceadedae38e
Initialize the below wmi service id to enable undecoded frame
capture filter support. This is added to support monitor status
ring configurations for filtering in PHY error packets.
WMI_SERVICE_FP_PHY_ERR_FILTER_SUPPORT
Change-Id: I2e35609e89ac1ba000118bc2699a8ce61612a267
First host checks below two things in PNO scan request:
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in pno scan request.
2. At least one 6G channel is present in the pno scan req.
If any of above conditions satisfy, Host fills all remaining
(other than channel(s) present in pno scan req) valid 6 GHz
channel(s) to pno scan requests and set the flag
FLAG_SCAN_ONLY_IF_RNR_FOUND for each remaining channel(s).
Host sends this updated channel list via WMI command
WMI_START_SCAN_CMDID_param_tlvs->channel_list for pno scan
to firmware.
By this driver allows Firmware to scan 6G channels based on
RNR IEs only (for colocated APs reported by 2.4/5 GHz APs).
Change-Id: Ib6118c4525e9fbe233eb6a7e07a4a3345d486e8a
CRs-Fixed: 3103923
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
Num stats over QMI indicates how many stats requests are fetched
without triggering RTPM resume. If RTPM resume/suspend happens in
the middle then num stats over QMI counter should reset. Add logic
to reset num stats over QMI counter during WoW enter/exit.
Change-Id: I34fe93759bf8a7a2a6c0d4b389ad96b8e1ba4d6c
CRs-Fixed: 3110590
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
Add Host enums for the following WMI pdev parameters related to
Beryllium Spatial Reuse.
- WMI_PDEV_PARAM_OBSS_MIN_DURATION_CHECK_FOR_SR
- WMI_PDEV_PARAM_TRUNCATE_SR
- WMI_PDEV_PARAM_CTRL_FRAME_OBSS_PD_THRESHOLD
CRs-Fixed: 3112080
Change-Id: I19accc6dc2a744599ccce6ebf683499d92881993
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
Currently there is no support to read bmiss stats from fw.
With this change, add support to read bmiss stats from fw.
Change-Id: I75dee16fffac88303f22742eda1985dc15c6ec15
CRs-Fixed: 3097302
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
Currently, VDEV manager responses are using legacy path instead of
target_if, vdev_mgr and os_if components. As the driver implementation
is planned for converged model, legacy implementation will be moved to
the respective components.
To avoid rework, Use target_if, vdev_mgr and os_if components to process
the FW responses corresponding to the vdev manager.
Change-Id: I778f6de93481fc730383e8f8e1c604f173947d69
CRs-Fixed: 3093776
Populate the number of Spectral detector info TLVs and
add the debug prints for Beryllium Spectral TLV extraction APIs.
Change-Id: I1f449389ba630e30e160b3070bee14d93a45c3be
CRs-Fixed: 3097662
- Add MLO Quiet IE related parameters in ml_bcn_partner_info structure.
- Populate MLO Quiet IE related parameters in the beacon template.
Change-Id: I5a4a069d067bdbc5e7c44c407f51a504e9aba151
CRs-Fixed: 3088019
Remove Union between link_num and vdev_bitmap as
it is possible send vdev_bitmap along with link_num
for forcemode MLO_LINK_FORCE_MODE_ACTIVE_NUM and
MLO_LINK_FORCE_MODE_INACTIVE_NUM.
Change-Id: Ie15c5f20d7990baebee50bdc7a37734331eb891c
CRs-Fixed: 3090334
Add EHT vdev param multi user configuration defines for each
bit field of the param.
Change-Id: I5f064cff01d30a86086bec0a65561c10e72c613d
CRs-Fixed: 3052451
Some p2p action frame needs big retry count than the default
max 15 retry count to get high tx successful ratio.
FW allocates 3 extra bits for retry count setup.
To use this field needs FW change in CR 3082533.
Set the extra 3 bits "retry_limit_ext" to "tx_param_dword0"
field for WMI MGMT send command. Existing 4 bits
"retry_limit" combines with this new 3 bits
"retry_limit_ext" to create a 7 bits retry count:
bit 0 - 3: retry_limit
bit 4 - 6: retry_limit_ext.
So Maximum 127 retries can be specified to a certain mgmt
frame.
To use this field needs FW change in CR 3082533.
Change-Id: I889933ea1750c03701ba8a60340f27e6c2594c1b
CRs-Fixed: 3082534
As the fw interface are changes are merged for ME6,
Enabling ME6 feature by removing PEER_DMS_CAPABLE flag.
Change-Id: I0535abadd8dd270f124ba620fe7faed05eb77a26
As part of new enhancements, driver is supporting MAC address update
after VDE creation in the FW. To support this feature add WMI support
to send MAC address command to the FW.
Change-Id: Ie4b7291520793c8aa501fefccaf7b91ab22e9054
CRs-Fixed: 3084119
WMI includes are not part of include path in some WIN projects,
move MLO related common definitions to wlan_mlo_mgr_public_structs.h.
Change-Id: If63c82bc15a2a0e0a045be896b74ea9addb3a64d
CRs-Fixed: 3083776
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: I8537147104f30b74ffb2e87946f2e5f4b129f0df
CRs-Fixed: 3075460
When WMI diag events are received over CE7,
wmi handle is mapped to null and all the diag
events are freed without processing.
Fix this by properly mapping wmi handle when
diag events received over CE7.
Change-Id: I3dc4f7ce37981a31cb6f01fc66edf6248682bea3
CRs-Fixed: 3082960
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to FW at the time of vdev creation in wmi_vdev_create_cmd.
FW uses this vdev_stats_id to fetch the stats from HW.
Add logic to convey vdev_stats_id to FW at the time of vdev create.
Change-Id: I91782c73a7f3f94175a0c28ab4adda2d894856db
CRs-Fixed: 3069992
For MLO, we need to designate one of the link vdev
as mlo vdev, on which FW will accept the multicast
frames and for the other link will drop the mcast frames.
So as part of vdev start, we indicate the mlo mcast
vdev in the first vdev of the mlo.
Change-Id: Ic962a6e1fead4a3cab7c622583392ecf373f4783
CRs-Fixed: 3080525
