Fix below errors when the item DISABLE_MON_CONFIG is defined:
No return value for below two APIs:
dp_tx_mon_buf_refill() and dp_rx_mon_buf_refill()
CRs-Fixed: 3205083
Change-Id: If449616e30e75c23c7b25fb449a0ad8e501529aa
Change tx monitor ring sizes and make minor fix when getting the
number of entries.
Change-Id: Iec458d88948556f7007d4fa33bf082c8ee089064
CRs-Fixed: 3206170
Limit the desc pools such that the max ppt entries
do not cross limit for the hardware cookie conversion.
Change-Id: I9149b20bea0d72b466ef8c3e2ee9c0b536ffe24e
CRs-Fixed: 3201792
In order to provide the info about common info len and BSS
param change count, add API util_get_mlie_common_info_len()
and util_get_bvmlie_bssparamchangecnt().
Change-Id: I0f5fea2265cbb8f1df265542af7009d624a0129b
CRs-Fixed: 3202491
Add support to move FISA FST from DDR to CMEM, enable it for Kiwi
Adding CMEM support for FISA FST includes
1) Reserving CMEM memory space FISA FST
2) Add HAL macros for CMEM flow search entry
Change-Id: I45fc91a86c1ac89d3d95b246e26ea981314425a8
CRs-Fixed: 3199250
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
Currently if AP and STA supports VLP, power mode
is set to VLP without any check of AP indoor or
not. Example when STA is in GB country code and
AP is in KR Country code and AP is indoor AP,
Power mode should be set LPI, but as per current
implementation power type will be set to VLP irrespective
to AP indoor or not beacuse both countries support VLP.
Change-Id: Ib2be4c0076a7e94f9870bd8fc320cfcc170754f9
CRs-Fixed: 3203504
There is init failure about monitor status ring after started CFR
capture. So extend num_rxdma_status_rings_per_pdev to 2 for KIWI
which is same to HSP.
Change-Id: Ic24d732957dc1991a3fca350aebe5f57d9b02577
CRs-Fixed: 3203678
Currently even when the partner link assoc failure driver is maintining
the assoc link this is resulting in several side effects w.r.t
memory corruptions etc.
Disconnect the ml connection incase of link assoc failure.
Change-Id: I4bbdcf4099f3042f5065067ca5d817f986ffb30a
CRs-Fixed: 3204310
HW Tx delay to be calculated in microseconds based on the timestamp
provided by HW. A new type of hist bucket is added for this delay.
Change-Id: I3cae5e78459f675b5ac7f670bdec950f9a62c78f
CRs-Fixed: 3202312
The radar found frequency offsets to find various 20MHz sub-channel
frequencies is hardcoded for different channel widths. These frequency
offsets can be calculated reducing repeatitive code.
Calculate frequency offsets from channel widths and center frequencies
to determine the radar found frequencies.
Change-Id: I146fa6dd06473ff90cad4bb5dd8ba4ce13ab7c7c
CRs-Fixed: 3182067
Functions (reg_get_min_max_bw_on_given_pwr_mode/
reg_get_chan_state_on_given_pwr_mode) were defined under macro
CONFIG_BAND_6GHZ. Add definition for above functions when
CONFIG_BAND_6GHZ not defined. When CONFIG_BAND_6GHZ is not defined
a channel search is only for 5GHz or 2.4GHz channel. Therefore,
the search is restricted to only the current channel.
Change-Id: Iaae6f362dd81a74c8d92756d507dd16b0dc4c3af
CRs-Fixed: 3205342
To avoid possible compilation issues, move reg_set_ap_pwr_type
definition under CONFIG_BAND_6GHZ macro.
CRs-Fixed: 3207006
Change-Id: I7c2da42767c37356414a34757245772cd405f3b0
Rate limit the log in non-TQM Tx completion path and add a counter
to increment whenever Tx completion status is received and release source
is non-TQM.
Change-Id: I8968ccc7a499577bd4fdfaef78e6520b00c12503
CRs-Fixed: 3201403
In the case of NAWDS set the host inspected bit for
GSN based packets to avoid the FW reinjection.
Change-Id: Iee1653e9bebcd1ce6ef283a61d9c10a25b911a26
CRs-Fixed: 3203093
Currently host check 3rd bit of the extended feature flag to
know whether FW supports below two features:
1. Roam Frame info stats - per candidate frames support
2. multi-client feature flags support
The host should check different bits for different features.
Fix is to allow the host to check the first unused bit
(here 4th bit) of extended feature, flag to check whether FW
supports multi-client feature flags support.
Change-Id: I485aeab6a90e900a52e88cd013645203457c1adb
CRs-Fixed: 3184410
For legacy targets, MLO-specific event-handlers are not
supported.As this is not fatal, the caller of the
wmi_event_handler_register API should not treat this as
failure.
Change-Id: Ic6a36c933b46cfcbe860f573af290cac4667de44
CRs-Fixed: 3181774
In 5 GHz band, a 320 MHz band channel cannot be formed without
puncturing. Hence the contiguous available BW is 240MHZ which has
twelve 20MHZ channels from 5500 - 5720. Send CAC start/CAC
complete/radar detect information only for the channels which are
not punctured.
CRs-Fixed: 3200931
Change-Id: I5c2bc3314df6d1d61500e7fb24eef4a096ba4bb5
The original BA window size given from CP might > max DP supported,
add sanity check based on HAL target allowed.
Change-Id: Ibadaddeffe65165a89d580d8a5cbf5f7c724c809
CRs-Fixed: 3193852
Add API reg_is_afc_done and it's wrapper wlan_reg_is_afc_done to check
if AFC response enables a given frequency.
Change-Id: I953139762fd5c06ce19edc1d807edf41126f6f2b
CRs-Fixed: 3195189
To support AFC outdoor device deployment, initially enable the entire SP
channel list with channel flag as REGULATORY_CHAN_AFC_NOT_DONE and channel
state as CHANNEL_STATE_ENABLE when the device deployment is outdoor and
AFC power event is not received. Once the power event is receive,
intersect the AFC channel list with existent SP channel list and for
channels which are enabled by AFC, unset the flag
REGULATORY_CHAN_AFC_NOT_DONE and keep channel state as
CHANNEL_STATE_ENABLE. When the SWITCH_TO_LPI event is received, keep the
SP channels as enabled with REGULATORY_CHAN_AFC_NOT_DONE flag set.
Change-Id: Ibbeb336a84db4a27aa22a4fc083f961a8a47aa9d
CRs-Fixed: 3195189
To add AFC outdoor device deployment support,set the AP power type as
REG_STANDARD_POWER_AP during the creation of regulatory pdev private
object. Update the flag REGULATORY_CHAN_AFC_NOT_DONE in super channel
list based on the AFC_POWER_EVENT. On receiving the SWITCH_TO_LPI event,
if no LPI channels are present return an error. If LPI channels are
present move to LPI mode and update the channel list both in presence and
absence of ACS.
Change-Id: Ib4653a83d4c7ea2ec5212f9ba4d517c0e7e5027a
CRs-Fixed: 3195189
In beryllium DP, htt_tx_wbm_completion_v3 is used in which
20B are used by host and only 16B is assigned to the htt tx
status.
To fix this, increase the macro HAL_TX_COMP_HTT_STATUS_LEN
to 20 bytes.
Change-Id: I973ba1f8118488089cd6d6baac7fd589886c2164
CRs-Fixed: 3199031
Initially, 2K buffers (default) are allocated and Rx monitor ring fill
level is set to 2K at monitor soc attach and these buffers are used for
enhanced stats.
On monitor vap creation, additional 6K buffers are allocated and monitor
ring fill level is set to 8K.
On execution of wifi command after this, fill level is still set to 8K
and this results in monitor vap to operate with only 2K buffers.
Therefore add functionality to set the fill level to 2K (default) at
monitor soc init instead of monitor soc attach and also add sanity check
for num_req_buffers in the API dp_mon_buffers_replenish.
Change-Id: I0f4b269ab4ed05ed1f0223e3dc83d8675dab4860
CRs-Fixed: 3201411
