Beacon offload control WMI command is used to control beacon tx in
beacon offload enabled mode. Add WMI API to send this command to FW.
Change-Id: I8b340b69ff508aaf80b9a80de044b0189b947a66
CRs-Fixed: 2140255
WMI ready event provides num_dscp_tid, num_total_peers and other
information that is used. Add API to extract these params.
Change-Id: I85ffc43f20935d84de133591020468c5e5f102de
CRs-Fixed: 2141667
Add support for configuring aggregate size for A-MSDU and A-MPDU
aggregations.
Add support for rate dropdown vdev param to dropdown rates for SU, MU
and MGMT packets.
Change-Id: I033693e1c21c05d06acd7df36eac580be19fe20b
CRs-Fixed: 2138655
Acked-by: Aditya Sathish <asathish@qti.qualcomm.com>
Currently, WMI is exposing two command ops
(send_init_cmd and init_send_cmd) for init
command purpose which is leading to data/code
redundeancy. Perform clenaup for send_init_cmd.
Change-Id: I8f31ab45392cf2afb3cc34c633ba83ea42a3a835
CRs-Fixed: 2138507
RCPI is measure of received RF power in the selected channel for a
received frame and is measured at the antenna connector and shall be
measured over an entire frame. It is a monotonically increasing,
logarithmic function of received power level.
Wlan firmware computes RCPI.
Add host support to query firmware for RCPI information of
peer mac address in sta, p2p client, softap and p2p go modes.
Change-Id: I27fe45e993bd9b157fe33ca08a56330c1c950d16
CRs-Fixed: 1093187
fw_abi_version is used in WMI to check compatabilty of host and target
WMI interface. Cleanup handling to fw_abi_version.
Change-Id: Ia78c4683b9eff06d3c052df3921c024962abd828
CRs-Fixed: 2131311
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.
Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
Add functions to send bridge MAC programmed from user
space to firmware.This change is part of a workaround
to fix an looping issue which resulted in wrongly adding
bridge's own MAC address to fw WDS table.Send MAC address
to target to avoid adding our own bridge address to fw
WDS table as part of source port learning.
Change-Id: I815d3c3f106cd2f528ac9172712ec6c2f47f4410
CRs-Fixed: 2070956
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
qcacld-2.0 to qcacmn propagation
Currently the crash can be injected by iwpriv command and FW
gets crashed.
Changes are done to add the gEnableCrashInject ini parameter
1) This ini param is disabled by default.
2) If this param is disabled the crash inject is ignored.
Change-Id: I7e908be1e37090a9d343dc04411fe387f776a937
CRs-Fixed: 1087774
For DBDC/DBS cases, each radio will have a separate MAC
address. FW will provide the list to host in ready
event. Handler has been added to extract the list.
Change-Id: I6da96ae02a1f30995e3953358677090b84fc57c4
Remove redundant header file inclusion from wmi layer by abstracting
the dependency with in WMI layer.
Change-Id: Ie113b69006a960b70d781134775bc44c7508fc4c
CRs-Fixed: 2023825
Currently, for world regd and some other regds where conformance test
limit is NO_CTL, host is sending invalid CTL info to fw instead of
NO_CTL (0xff) due to type conversion issues.
To fix this, use proper unsigned type for CTL info.
Change-Id: I0407d30c6cd6f7f485d767c97bc5381c9c731440
CRs-Fixed: 2056847
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
Add support to send 11d scan start and stop commands to FW and
process the 11d new country update event from FW.
Change-Id: I5c1588cfb5af672cdb5738784de1bd0b83bdbe77
CRs-Fixed: 2048784
Recently, FW changes were implemented to support WMI resource config for
multi-radio. As part of this, the TBTT offset and SWBA events were modified
to support increase in the number of vdevs per SOC.
Brief description of the changes with respect to TBTT offset
------------------------------------------------------------
Converged FW will send extended TBTT offset event when the number of vdevs
configured is greater than 32 and will continue to send normal TBTT offset
event when the number of vdevs configured is less than 32. Legacy FW will
continue to send vdev map and tbttoffset list array as part of the TBTT
event.
Extraction API is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
extended TBTT offset event but sent as vdev map for the normal TBTT offset
event. In order to handle normal TBTT offset event, extraction API for
normal TBTT event adds logic to convert vdev map into the number of vdevs
configured.
Extraction APIs are added to extract vdev id and tbttoffset information per
vdev that are configured. The vdev id information is sent as vdev map and
tbttoffset list as an array for normal TBTT event and as an array of
structures containing vdev id and tbttoffset in the case of extended TBTT
event. In order to support normal TBTT event based on num vdevs, extraction
API for normal TBTT eventadds logic to determine the vdev id from vdev map
based on the index(running through 1 to total number of vdevs) passed from
the driver.
Brief description of the changes with respect to SWBA
-----------------------------------------------------
Converged FW will send additional information num vdevs and vdev id
embedded in tim info and p2p noa TLVs for SWBA event. Legacy FW will
continue to send vdev map and array of tim info and p2p noa desciptors.
Extraction APIs is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
SWBA event in the case of converged FW and as a vdev map in the legacy FW.
In order to handle legacy FW, extraction API for non-TLV adds logic
to convert vdev map into number of vdevs configured.
Extraction APIs are modified to extract newly embedded vdev id information
in tim info and p2p noa descriptors. The vdev id information is sent as
vdev map for legacy. In order to handle legacy FW, extraction API for
non-TLV adds logic to determing the vdev id from vdev map based on the
index (running through 1 to total number of vdevs) passed from the driver.
Change-Id: Ibf84adbb1c526321ec031d5539aff66dcbd1315b
CRs-Fixed: 2053628
Program the DMA ring configuration to firmware using
WMI_OEM_DMA_RING_CFG_REQ_CMDID.
Change-Id: I99e5b3a369d7eeee1d1fe41782285ed54cdb82cf
CRs-Fixed: 2053958
The WMI API exposes the broadcast hardware filter. Modify the WMI API
to expose all of the supported modes of the hardware filter.
Change-Id: I185b149f4d1ad38692d8ff5810acd52bf84565b2
CRs-Fixed: 2040419
Add PMO changes to configure and clear default packet filters
over suspend and resume
Change-Id: I1f3fab170d2669865da8ba09673df6ec8e755b31
CRs-Fixed: 2034458
pdev_id in FW starts from one. Zero is reserved for Soc. But host uses
pdev_id starting from zero. Make WMI changes to take care of this
difference and always provide and accept pdev_id starting from zero at
WMI. Use 0xFF for SoC on host.
Change-Id: I49f481e54bbaeea9359753bc7d3da9092fc9559a
CRs-Fixed: 2045125
1. Add multi radio support for thermal throttling
2. Add TLV WMI support for thermal throttling
Change-Id: I2cdbf9a4acdd9346c0fe3dd24c510885cc8fef8e
CRs-Fixed: 2041264
Add support in WMI layer to configure coex config command for
lithium based chipsets
CRs-Fixed: 2037499
Change-Id: Ib83407524bd3b5cdad28f73a6ccc36d4a0271779
Requirement is to get CCA from frmware when connection fails due to
assoc/auth/probe response timeout. These are common changes to get
CCA from firmware.
Change-Id: I062343ed065d7b0c38b9e3b24ecfa9851b9b1537
CRs-Fixed: 2031843
Host support for Static and Dynamic chain mask selection.
parse new TLVs from ext service ready,copy tables to
wlan_objmgr_soc object.
CRs-Fixed: 2016643.
Change-Id: Ia4735eb4c7774c381df01f56696e8c86fc6c56ab
WMI RX event processing is very critical for WLAN driver and today
we are using kernel's shared event work queue. Shared event work
queue is used by many drivers and if any work submitted in shared
work queue takes longer time to finish then it directly impacts WLAN
control path processing.
Define a dedicated work queue for WMI RX event processing and use
it for WMI RX event handling.
Change-Id: I8ee6ca5b4b20c3357d46f8b56943078a0a76977f
CRs-Fixed: 2029775
Create output agnostic log print APIs for WMI and Credit History to
enhance the debugging experience.
Change-Id: Ie89a9cb3b54c373ac2610d62003e940da17696d8
CRs-Fixed: 2028762
Due to different layers, TLV processing is confined to WMI folder.
Therefore, move the TLV layer processing of WMI_REG_CHAN_LIST_EVENTID
to the wmi folder.
Change-Id: I7e7182997a9506035030f33d2f81a403fbe97a2f
CR-Fixed: 2019750
