REO queue setup is getting triggered from processing
pending null queue exceptions in WBM release ring, after
sending peer delete command to FW, but before peer unmap
is received, causing target assert. Mark peer deletion
before sending peer delete command to avoid this.
Change-Id: I2d85d01e049cb37d9321beeee8e41f44e40e68ad
CRs-Fixed: 2155420
Add ppdu tid tlv value assignment in cdp dp stats layer
ppdu tid value is used by apstats command it was earlier
showing zeroes
Change-Id: Id24b08d2424dcc09424624d84044b3963bd81b36
cck rates were getting updated for ofdm rates
and nss index were getting wrongly incremented
fixed the same
Corrected sgi and preamble too
Change-Id: I2dabb685de6e0bd4ba5094845cde228b3c32e2a9
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Update mon_rx_status fields for HE case. Also
added rs_fcs_err field to structure and populate
its value.
Change-Id: I4681543c7d6c6c7ac0d666cd93072caaee285585
The nbuf is not freed for all possible branches in rx_wbm_error_pr
cess function. Add fix to ensure the nbuf free for all conditions.
CRs-Fixed: 2171899
Change-Id: I8e40fc7dc5afb0be0257244e1e704a0200ffacc0
Support added for the following:
1. The counters for Rx offer, Tx Offer, MgmtTXFail.
2. Block mgmt frame from a particular mac address.
3. Display NSS for associated clients.
Change-Id: Ic0f6ea8f7b94f998f6a9d2d3e1adc3a71c79056b
Remove dependency of extender ap on VAP layer and radio(ic) layer data
structure
Change-Id: Ib336f518847abd1b29f5ea3cfd1a508dc2cd14e8
CRs-Fixed: 2148247
The pointer to peer is dereferenced after memory free in peer
_unref_delete function. Fix the issue by changing function
call sequence.
CRs-Fixed: 2167698
Change-Id: Iebd8f958bde4964c16a3c312d037e8f06e319350
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
Add a new data stall event which will be triggered by FW
when there is no exchange of frames post TIM and the STA
will keep on extending the ITO waiting for the rogue AP
to send a frame.
Change-Id: Ic97ab1036a12a20b174fa433e4a06ce0e9b4c308
CRs-Fixed: 2163316
Tx ME descriptors used for Tx Multicast enhancement are not freed
in pdev detach path causing memory leak. Fix this by freeing
them in pdev detach path.
Change-Id: I902e7a829495871e3d0013a9942f86c02bbba80e
CRs-Fixed: 2168524
during peer delete we are trying to update peer stats to
vap_bss_peer, but in STA mode we do not have bss_peer,
this is resulting in an assert during peer delete in STA mode.
Change-Id: Ie302dd74caf2df3ffe0a57e9ecd22a0c31cbcb60
CRs-Fixed: 2168929
Buffers sent through htt htc endpoint is cleaned up within DP. Set this
endpoint in transport layer to ensure that transport layer skips buffers
from this endpoint during cleanup of pending buffers in source ring.
Change-Id: I3f7d36c26347b508913d4200e0806d93408097e8
CRs-Fixed: 2168235
TX descriptors should be unmapped and freed when VDEV is detached.
Or else it will cause memory leak in qdf_mem.
CRs-Fixed: 2163178
Change-Id: I59da73787786f78c1f057e4daad7b4d53e7fbe4c
The kernel panic is seen because wrong variable was used , and this
variable was getting de-referenced without initialization.
Fix this by using the correct variable
Change-Id: I1f03c724f3ecba44a8ce0bc94242f2acafa5649d
CRs-Fixed: 2166423
vdev stats are getting reset to zero when a peer disassoc
with the AP. the fix is basically update peer stats to
bss_peer just before we delete the peer.
Change-Id: Ibada4ab82fbb68f32df89bdbae8b172bc8973fe7
Send control packets as mcast even though snoop entry is not found
instead of dropping the frame. These control frames include IGMP/MLD
frames that is required to add the snoop entry.
Change-Id: If905b54e2ae9eaa3943428b36b1b894bcd528785
CRs-Fixed: 2133270
Added dp path function pointers for inact
timers and set params used in WifiSON
Load Balancing Daemon
Change-Id: Ic23d7b562b476c0fb92c8734b029a4e1632599a5
If hal_srng_setup() fails, memory allocated for srng
is not freed resulting in a leak. Free the memory in
that case. In future, return error to caller and
assert when invalid ring ID is used during setup.
Change-Id: I6f3a7494a5c5e861652f3a38d18c220cd9a6eef2
In dp_rx_null_q_desc_handle, if peer is invaild and no need to
deliver to the upper layer, the nbuf must be freed before recycle
the rx descriptor.
CRs-Fixed: 2153932
Change-Id: I1b373d1b5b50da42b896f0b2fd7bbd13b0e2466d
Only need to udpate per peer statistics in RX. What's more, this
statistics should be protected by flag of process_rx_status.
CRs-Fixed: 2160448
Change-Id: Iff3f5e1e6d00ef777cd6b62d6903c710c9430960
Both process_tx_status and process_rx_status is disabled for the
default setting. Enable those flags by default for MCL
CRs-Fixed: 2146734
Change-Id: I8c5a636badcfe9327fce7f3332abd93946f003bd
Added a check in RX path to detect multicast loopback packets in
qwrap mode. In qwrap mode, there are multiple station vaps and
multicast loopback packet from one station vap should not come into
the other station vap. Added a check for this by iterating through
the vap list and checking if any of the vdev mac address matches
with the source address of the packet.
Also added a new vdev parameter to check if qwrap isolation mode is
enabled. In qwrap isolation mode, loopback packets should not be
dropped.
Change-Id: I7d35bf657a87337871156e4caec9038432e23a87
CRs-fixed: 2149190
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
For RAW Mode AMSDU when multiple fragments will come
address for first fragment getting updated but other
fragments were not getting updated properly.Fix updated
all the fragment address.
Change-Id: Ie450bcd4e467cca779d0280d76ce7b4ace1dffc2
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
Stats counters for BW were not updated correctly
due to difference in mapping of BW on host and FW
Also fix the Rx Stats to account for TCP Ack count
Change-Id: I7e844a7032e7968c110c7a0f8c45b0349a5cb818
In wbm_err_process function we are releaseing the sw rx
descriptors at the end and we are calling replenish after
we processed all the pkts in wbm_release ring. FW team said
that the re-fill ring is empty for high throughput scenarios.
To avoid re-fill ring being empty replenish buffers
first and then process the nbufs later. Also free any invalid
peer MSDUs during pdev detach.
Change-Id: I3e1088a3df3658965ffb31e0e0420a37203ba70e
Enable or disable TCP\UCP checksum offload for TX according
to the flag in wlan cfg module, which is determined by INI
(MCL) or initialization setting(WIN).
CRs-Fixed: 2155236
Change-Id: I0e30fc062a000c2d9c47674fe80da59a2ac0de51
Host CCE Classification changes for RAW Mode workaround
RAW Mode EAPOL frame classification for raw mode
Change-Id: I533c2e8bb55e3cd5088c6bff046e67066c784053
CRs-fixed: 2132295
Adds stats for number of ADDBA, DELBA requests,
pn size and window size per tid.
Change-Id: Ib7e3a9b948439695afd9a952fe46ac42ac58c653
CRs-fixed: 2151863
For one byte data structure of unsigned type, it is expected that
the maximum value is 255. However, NR_CPUS is 512 in x86 setup of
Napier.
CRs-Fixed: 2158203
Change-Id: I057fb0cf3c11e687dfdd6cd2295b16743297d561
In dp_process_htt_stat_msg function, the stats message must be
interpreted one by one. It can't move to the next message unless
the current one is handled completedly. Or else it will cause a
memory copy overflow.
CRs-Fixed: 2156792
Change-Id: I8a3784cd17f2a68b16c4f47c6b1a24e12d23aaa5
During RX TID deletion, if FLUSH_CACHE REO cmd fail to be sent,
the required callback function won't be invoked, hence
local allocated REO desc and related TID queue desc will leak.
Do clean up when REO cmd failed to be sent.
CRs-Fixed: 2155929
Change-Id: I02ff4a2340ad32986c30b935a376924bb75edb67
There is a hard-coded AST type number used for DP path, which will
cause poor readability. Fix this problem by using a pre-defined
constant type value.
CRs-Fixed: 2142975
Change-Id: I3520970bf59ea7152a0851cfdc3b8e7943ddbc19
