Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Id2a0468d49237c21062cfd1988e34903658cdad9
CRs-Fixed: 3008549
This reverts change Id8134003e6f7a3e0368b20c496f650e0b7025b9e
Moving cp stats to scheduler thread is breaking the
synchronization in stats collection. Currently, when a get stats
command is issued from framework, host driver sends the same to
firmware and wait for both llstats and get_station related stats.
The expectation is to receive get_stats first and then llstats.
Host driver has a wait for the last llstats event to return the
stats to userspace. As the cp stats(get_station stats) are moved
to scheduler thread, the order of these events can't be ensured
as llstats are still running in kworker thread. llstats event gets
processed before cp stats mostly and stats are returned
immediately to framework. Framework may issue the get stats
command again and the same is sent to firmware, which may result
in synchronization issue in firmware as well.
Moving llstats also to scheduler thread may not be optimal as these
are aggressive and can be queried by framework multiple times with
a milliseconds gap.
So, move back the cp stats to kworker thread to maintain
synchronization.
Change-Id: I8dc518f0de37e7cc203cb1f6e67045d74b304d93
CRs-Fixed: 3002534
Currently, wmi_roam_scan_chan_list_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I8f59f9ebfe1bbdc7ef37ccc1f10178fe8128e912
CRs-Fixed: 2990376
Currently, wmi_vdev_disconnect_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I2486cc3f63c4b35305b60ac55cd0a622c7185323
CRs-Fixed: 2990373
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
Extend hdd_config_modulated_dtim() to configure moddtim
dynamically in the both non li offload and li offload mode.
Change-Id: I8669ec618d4aa9cd87c4c234972ca500c98119b6
CRs-Fixed: 2970090
Add function to populate the rx average rssi received from target in
pkt_capture vdev_priv structure. The rx average rssi is received in
wmi smart monitor event.
Change-Id: I9206669b418a2245bb8d53920040fddea77ce06c
CRs-Fixed: 2969242
Register handler for wmi smart monitor event in packet capture
mode in lithium. Currently, wmi smart monitor event provides
average rssi of last ten received data packets.
Change-Id: Ieeea5cbef328b04f139f54e7a42d52a3cf25824b
CRs-Fixed: 2969245
Return success when firmware doesn't support 11k offload, or else
subsequent roaming related wmi commands have no chance to issue.
Change-Id: I69d55cca63f2b7ab4787295a2825159395cf2a11
CRs-Fixed: 2976163
Provide ucfg api to configure qos null and trigger frames.
Ucfg api will send configuration to FW. Below configuration values
are allowed.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_DISABLE: disable capture for
trigger and qos frames.
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE: enable capture for trigger
frames only.
PACKET_CAPTURE_CONFIG_QOS_ENABLE: enable capture for qos frames only.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_ENABLE: enable capture for both
trigger and qos frames.
The packet capture config old value will be over written by new value.
For example, first if we configure value as
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE and then if we send config as
PACKET_CAPTURE_CONFIG_QOS_ENABLE then config is enabled only for qos.
Change-Id: I02dcd4372c7194ec3e477694ad0e2c045fe6c942
CRs-Fixed: 2967824
Firmware sends NAN log events to driver and these are logged
with info level to capture complete NAN state machine logs in kmsg.
Currently, these events are received/processed in soft IRQ context
and causes performance issues as logs introduce delays. Move the
event registration to RX_WORK context to avoid delays.
Change-Id: I15ba20059f55f002cfe276d62e68e3cc09136a23
CRs-Fixed: 2960359
Existing INI disable_4way_hs_offload is defined as a boolean
that controls the EAPOL Handshake to be offloaded to Firmware or
Not. There is no way to specify the EAPOL offload per AKM.
Hence extended the support of EAPOL handshake offload to firmware
per AKM by converting this INI to a bitmap integer.
With ini value as 0 by default Firmware takes care of 4-way HS
during roam for all AKMs except for SAE and OWE. If
this ini value is 1 then Host takes care of EAPOL for all AKMs.
Having the backward compatibility, added a new value to ini.
If this ini value is set to 2 and also if the SAE EAPOL offload
service bit is set by Firmware then the behavior is same as ini
with 0 except that Firmware takes care of 4-way HS for SAE roam
as well. And for OWE it is still handled by supplicant.
To achieve this, new roam offload flag is introduced to indicate
Firmware about SAE roam EAPOL offload, So that in Roam sync
indication Firmware will inform the status as connected but not
authenticated so that supplicant can take care of 4-way EAPOL HS.
Change-Id: I8b65a1768fad91fac7e427712d3ccf4586176f5f
CRs-Fixed: 2955029
Currently, cp stats are received through kworker thread context.
This causes race conditions/out of sync issues if any common data
structures are handled in parallel in scheduler thread context.
There is no need to receive the cp stats on kworker thread as per
current design. So, move the cp stats event handling to scheduler
thread to avoid any race conditions.
Change-Id: Id8134003e6f7a3e0368b20c496f650e0b7025b9e
CRs-Fixed: 2928876
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
In target_if_register_mgmt_data_offload_event(), check NULL value of
wmi_handle before it's used by wmi_service_enabled()
Change-Id: Iea51c59770258fd10468bb439f559094b563851f
CRs-Fixed: 2900533
Add vendor command interface/feature through which the user
or vendor can set the dtim count as per their requirement.
Change-Id: I26010948c4ed7e3c49bfe0453119235d4f438c6f
CRs-Fixed: 2894349
Support has been added in common code to register both
common tx ops and MC/WIN specific tx ops. Add support to
register and tx ops for MC specific stats.
Change-Id: I4e5263e4685a707008ec3c5e96f50c707b071fe9
CRs-Fixed: 2851256
Periodically request pdev stats from FW to receive channel noise floor
information after monitor vdev has been brought up, based on the band
currently being sniffed. Use the band information as a secondary parameter
when sending periodic request to fw so a single noise floor value is sent
to host. Pass this noise floor information to dp_pdev to be populated in
radiotap header.
Change-Id: I488e4985392cb646ffdee914359fa995dbeb025e
CRs-Fixed: 2833458
Currently, Stats request commands are sent over qmi right from the
target suspend request is sent to FW. This is leading to a crash in
FW since it is trying to access PCI when it is in suspend state.
To address this, send stats request over QMI only after the ack is
received for the target suspend command.
Change-Id: I1b2b6a60c5d8c7ec4375d328e58a66d749794e3f
CRs-Fixed: 2835903
Use WMI_RX_SERIALIZER_CTX context for thermal event handler.
The default context is tasklet, it may cause issue when interact
with OS interface.
Change-Id: I349412c2afee9a081f0d38704541f77b5e4569f4
CRs-Fixed: 2824461
In mission mode, add support for virtual add/del monitor
mode interface. In addition to STA vdev, create and maintain
a new vdev for monitor interface.
Change-Id: I91ea8e56976cce92f9b1ae308d4bd0fb30815366
CRs-Fixed: 2818499
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for cm/wmi roam related files.
Change-Id: Iec350f032c3e037204f560199d4a6e258ac02688
CRs-Fixed: 2810145
Roaming between different PMF option APs has following issues:
1. Roaming between Optional -> Disabled -> Optional
When STA roam to optional, PMF is set to False from STA in reassoc
request and all management pkt not secured.
2. Roaming between Required -> Disabled -> Required
STA not able to find candidate AP when tried to roam to AP with PMF
Required.
Root cause: When LFR3 roam happens, vdev_crypto_params will be reset
including rsn_caps 11w PMF, if new AP hasn't enabled PMF, vdev rsn_caps
11w PMF is disabled too, and passed to F/W. Then F/W think DUT STA
doesn'tsupport PMF, then failed to roam to AP with PMF Required and
enabled.
Fix:
Get self-capability of 11w PMF from connected profile and pass to F/W in
WMI_ROAM_SCAN_MODE by wmi_fill_rso_tlvs after roaming.
Move target_if_cm_roam_fill_11w_params to csr_cm_roam_fill_11w_params,
put protocol part to csr connection manager.
Change-Id: I543799385ec8c0ec7afdf64e2310c24758305095
CRs-Fixed: 2807454
Stats event from target might have several sub events, and some event
has no peer stats but have adv/ext2 peer stats.
Check ext/ext2 peer stats even no peer stats in
target_if_cp_stats_extract_peer_stats(). Fix copy adv stats size error
in tgt_mc_cp_stats_prepare_n_send_raw_station_stats(). Although
get_station_stats_cb and get_peer_stats_cb is union callbacks,
better to assign to get_station_stats_cb because it is for
TYPE_STATION_STATS.
Change-Id: I0bead0cbb8b549cc538ef4a7327f0a8303c90bd1
CRs-Fixed: 2801842
Handle firmware thermal stats event and populate the thermal
information to upper layer with vendor command event.
Change-Id: I83286367ab542c08a205a7636f3d03189b0500e5
CRs-Fixed: 2786623
Change return type of following APIs from int to QDF_STATUS.
wmi_unified_register_event()
wmi_unified_register_event_handler()
wmi_unified_register_raw_event_handler()
wmi_unified_unregister_event()
wmi_unified_unregister_event_handler()
Change-Id: I534b499edbcfec6eddea0e9ed48f9eb1a2e872c8
CRs-Fixed: 2791275
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
In the Rome IPA case, it need wlanhost side to
enble/disable intrabss by WMI_VDEV_PARAM_INTRA_BSS_FWD.
If set to 1, the ip data transfer between two wlan clients
should be:
wlan client1 -> wlan fw -> wlanhost -> wlan fw-> wlan client2.
If set to 0, the ip data transfer between two wlan cleints
should be:
wlan client1 -> wlan fw -> ipa -> wlan fw -> wlan clients2.
Change-Id: I105ddbdb58f2cd01bdf94521bd7934508889de5d
Currently the roam scan scheme for each trigger is hardcoded to
either full scan or partial scan followed by full scan. Based on
the new requirement for home scenario,the user space configures
roam scan scheme for various triggers. Add support to send scan
scheme type for indvidual roam triggers enabled from userspace.
The default value of roam scan scheme can be modifed for
below roam triggers:
WMI_ROAM_TRIGGER_REASON_PER,WMI_ROAM_TRIGGER_REASON_BMISS,
WMI_ROAM_TRIGGER_REASON_LOW_RSSI,WMI_ROAM_TRIGGER_REASON_BSS_LOAD,
WMI_ROAM_TRIGGER_REASON_BTM
Change-Id: If8b185897b813afc44af362d31172705ea4d7b5c
CRs-Fixed: 2785233
