In roam invoke request, if bssid is same as connected
bssid use connected frequency.
Change-Id: I0e205ffab002b80021bf6a615e4cfc0a723f0ba5
CRs-Fixed: 3022351
Enable the firmware module WLAN_MODULE_WPM with error log level
in wow mode by adding default values in the ini gFwDebugWowModuleLoglevel.
Change-Id: I53a729bde6cfb6d8141864472718a2d8da9efead
CRs-Fixed: 3022434
Populate assoc assoc link id in ML IE of an assoc request from
scan cache entry
Change-Id: I82b2b68f45411b1588c76ddd7ce9d21a93d972f3
CRs-Fixed: 3013684
-Extract new wmi struct added as part of MLO roaming
changes.
- Send EHT and MLO weightage percentage to FW via
WMI_ROAM_AP_PROFILE.
Change-Id: I6b3f1f62ef6ea323cd1b75f63a5c63c38b000f1f
CRs-Fixed: 3010039
Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Id2a0468d49237c21062cfd1988e34903658cdad9
CRs-Fixed: 3008549
When driver gets rrm request it tries to get country from beacon IE
and if country is not present in beacon IE it sets the current
country information from regulatory and does not sets the op class
which is not the right way.
If AP does not send country in beacon IE, driver should set
GLOBAL_OP_CLASS for rrm request.
Change-Id: I4797d03f38817ac580f3bfea08f1939dad4da5d1
CRs-Fixed: 2996921
Currently, the WLM mode could be recovered after disconnection
or interface down/up about random MAC feature. Since some OEMs
have different mechanisms to config WLM mode on their framework
implementation and don't expect recovering the WLM mode.
So add logic to set default WLM mode when disconnection happens.
And add ini wlm_latency_reset_on_disconnect to differentiate
the implementation in driver. By default
wlm_latency_reset_on_disconnect is false.
Change-Id: Idcb3baf6ab8f0533eb01c28ff1c12513f9995946
CRs-Fixed: 3006875
Fixes in this change include:
- Add debug prints
- Don't disable roaming in case of MLO link connection
- Minor compilation fixes
Change-Id: I0aa9e8b2fd634b6dba1926796d95db997946aac3
CRs-fixed: 3013039
Add configuration support for broadcast TWT support and Rx control
frames to MultiBSS HE capabilities.
Change-Id: I2b3075a21c919c120e7a1ff674ac33fdd5d73801
CRs-Fixed: 2979513
Currently addba response is not updated with ini configured rx aggregation
size.
This change is to reject peer addba request if rx aggr size is 1 and
for other sizes select min value of peer and configured sizes.
Change-Id: Ia375b1e031dfecf948429e0baea19faa8fe42ffa
CRs-Fixed: 2962314
When TSPEC session is deleted, the access category of the data packets
should be downgraded to next lower AC. But this is not happening due to
acm mask is not getting updated when bss descriptor is NULL.
To fix this ssue, update acm mask from bss descriptor only when beacon
IEs are not present.
Also move qos related logic to LIM and bring missig changes which were
there before connection manager.
Change-Id: I9da80cf492b01762b4cc0a7b73271a0f5fe4b4a4
CRs-Fixed: 3011069
In LTE coex SAP restart scenario, currently SAP new channel is selected
base on 20M bandwidth, and channel bandwidth is determined after
channel frequency determined, if new channel bandwidth is greater than
20M, it is possible channel boundary fall in unsafe channel range,
because bonded channel is fixed with different bandwidth.
If select new primary channel with determined bandwidth, it would
violate MCC to SCC limitation if concurrency, to make it simple,
just shrink SAP bandwidth to 20M if check unsafe channel failed.
Change-Id: Id9bc5e6e807c0446138ca816bc3ada22443fe7a2
CRs-Fixed: 3005333
For roam scanning, "specific channels list" is preferred over
"preferred channel list". Hence if user configured specific channels
then return invalid for ADDROAMSCANCHANNLES command.
Change-Id: I858eef5c990cedb4b12c21c1a00f34ff6b819849
CRs-Fixed: 3014609
Peer addba request is rejected when reject_addba_req is set from
ini or vendor command.
Current reject_addba_req ini is replacing with gRxAggregationSize
when it is set 1 from ini.
Hence this reverts commit I80a4b78c1af77f5bfa68be3163f9e9a78cc64245.
Change-Id: I1cc57b88311da4dd8f26eade17072aaa1f0ebb59
CRs-Fixed: 3002204
Fix AP+AP IPA offload path failure when NAPI over IPA enabled on mdm
platforms by adding QCA_CONFIG_RPS check.
QCA_CONFIG_RPS is same as CONFIG_RPS, default Y, but depend on CONFIG_SMP
as msm-5.4/net/Kconfig.
For AP+AP mode,
For LA, CONFIG_SMP on, then QCA_CONFIG_RPS on, use IPA exception path.
For mdm, CONFIG_SMP off, then QCA_CONFIG_RPS off, use IPA offload path.
For IPA napi enable status check, just use qdf_ipa_get_lan_rx_napi,
don't need MACRO IPA_LAN_RX_NAPI_SUPPORT.
Change-Id: I6b16f2a830d4e7829c9e539896ed2977895d367e
CRs-Fixed: 2992393
Currently, the SAE authentication request retry happens
after a fixed timeout of 1 second in a STA DUT.
To make this timeout user configurable, add an INI to
configure SAE auth failure timeout.
Change-Id: I3a3944ab14564a944e0c83cc31a92847b5e8c5e0
CRs-Fixed: 3011892
Currently, If supplicant sends tx_mgmt request with random
mac_addr then driver adds the random mac_addr and sets this
random mac_addr to firmware via
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID command. Driver waits
for tx_ack or tx cancel wait to complete and then remove the
cookies and start timer to delete the random mac_addr.
In case after receiving tx_ack, driver removes the cookie and
starts timer and before timeout supplicant sends the
tx_cancel_wait request. But driver can't update the timer
duration as the cookie was already deleted as part action frame
tx completion.
Fix is driver will remove the cookie with below condition:
1. If driver receives the tx_ack and the wait duration = 0 then
no need to start the timer, remove the cookie and also remove the
random mac_addr from firmware
2. If driver receives the tx_ack and the wait duration != 0 then
start the timer
3. If driver receives tx_cancel_wait then stop the timer and
remove the randon mac_addr from firmware
4. If timeout happens then remove all the cookies for the random
mac_addr and also remove the random mac_addr from firmware
Change-Id: I3e227213239e865582e5d8674260d049c437aa9b
CRs-Fixed: 3002851
Add 320MHz support in cm so that connection info can reflect
correct 11BE 320MHz bandwidth.
Change-Id: I44772472bf9e64af0e47ad71ca7d29d1ff90daed
CRs-Fixed: 3009311
Based on new requirement, add aliasing for gNeighborLookupThreshold
ini and update the range of this ini as well.
Change-Id: I0a62e209d6a62001d6aec48849c4900062ae5bc7
CRs-Fixed: 3011060
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I6eee13935d1c5c74794027b88d94cbb572339e9e
CRs-Fixed: 3007209
The RRM request may have different country code with DUT internal
regdb configure, use country code from beacon IE if it is present,
otherwise use internal country code to verify op class of neighbor
report channel list.
CRs-Fixed: 2997474
Change-Id: I35a62d9791f08d26dd8a892739612eb422805523
When firmware sends Roam synch indication, driver changes the
roam offload state to ROAM_INIT and after set key completion is
received, RSO start will be sent. But if EAP/EAPOL fails and
disconnection is triggered then deinit command is sent without
setting roam scan mode to 0 with RSO stop command.
So change roam offload state to RSO_STOPPED if auth status is
connected in roam synch indication.
Change-Id: If8f56ce48500f6848fa917854b6252f8deb67c01
CRs-Fixed: 3005697
This reverts change Id8134003e6f7a3e0368b20c496f650e0b7025b9e
Moving cp stats to scheduler thread is breaking the
synchronization in stats collection. Currently, when a get stats
command is issued from framework, host driver sends the same to
firmware and wait for both llstats and get_station related stats.
The expectation is to receive get_stats first and then llstats.
Host driver has a wait for the last llstats event to return the
stats to userspace. As the cp stats(get_station stats) are moved
to scheduler thread, the order of these events can't be ensured
as llstats are still running in kworker thread. llstats event gets
processed before cp stats mostly and stats are returned
immediately to framework. Framework may issue the get stats
command again and the same is sent to firmware, which may result
in synchronization issue in firmware as well.
Moving llstats also to scheduler thread may not be optimal as these
are aggressive and can be queried by framework multiple times with
a milliseconds gap.
So, move back the cp stats to kworker thread to maintain
synchronization.
Change-Id: I8dc518f0de37e7cc203cb1f6e67045d74b304d93
CRs-Fixed: 3002534
Populate mlo IE for assoc req with inheritance mode.
populate base rate, extend rate, capability, extend capability
and HT/VHT/HE/EHT capability based on mac context.
Change-Id: I5e1c350a9c5f23a63d11c6d4b5cdbf0422dd53e0
CRs-Fixed: 3000895
In case of STA + STA concurrency, enable roaming on
another interface only if STA + STA concurrency is in
DBS.
Add sanity for SCC concurrency also along with MCC
concurrency in cm_roam_switch_to_init.
Change-Id: I8787828b4b950c355e9bf70af58aad7779de3e9f
CRs-Fixed: 3001723
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation
Change-Id: Ie04d4eb01f1a039f068b32b6c53aa3e65c919518
CRs-Fixed: 2987483
Save dual sta configuration in hdd context and
restore it after SSR. This allows driver STA + STA
connection in MCC/SCC.
Change-Id: Ia8bb8c845f0f76e7ce41ff32ab0a3bc6d5111018
CRs-Fixed: 2998225
If STA is connected to one channel and p2p is up on same channel,
and sta moves to another channel then p2p go also tries to switch
to sta channel immediately in case g_enable_go_force_scc is enabled.
But Go can't send channel switch announcement as go sends 1.5 sec
of NOA during sta connection with new channel due to which p2p may
get disconnect.
Fix is to not try to move to sta channel immediately. P2P Go will
try to switch channel only after NOA completion which is 1.5 seconds.
Add delay work queue of 3 seconds to handle worst case scenario when
BT is on and P2P tries to switch channel.
Change-Id: I557940dfc79da4922694ed24a573e41aae75c09a
CRs-Fixed: 2989207
Host driver enables hi-rssi roam trigger when STA roams to 6Ghz
AP. But hi-rssi trigger should be enabled only for 2.4Ghz AP
else it will cause frequent roams even though connected to
good candidate AP.
Disable hi-rssi roam when roamed to 6Ghz band AP.
Change-Id: I2ea2d06634963c1190aa1ca0d466b0873e36fbfe
CRs-Fixed: 3001090
Currently, wmi_roam_scan_chan_list_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I8f59f9ebfe1bbdc7ef37ccc1f10178fe8128e912
CRs-Fixed: 2990376
Currently, wmi_vdev_disconnect_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I2486cc3f63c4b35305b60ac55cd0a622c7185323
CRs-Fixed: 2990373
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Set gRemoveTimeStampSyncCmd ini to 1 by default so that even for more
than 60 seconds, the device can stay in RTPM WoW mode.
Change-Id: I560389dd9c7d5a33d01c092ad057a7a7aa6f7c37
CRs-Fixed: 3003718
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
In ROAM DONE event handling, policy mgr restart sap is not invoked after
updating the connection info and hw mode info thus not restarting the sap
after roam sync
To solve this, adding policy manager check after updating the policy
manager connection table.
Change-Id: Ifb8a5eecb98c05166986052ccc32422dbbe3bef7
CRs-Fixed: 2991721
Currently, host driver expects NDP_END indication from firmware
within 2 seconds after sending request to firmware. Driver shall
timeout and cleanup the corresponding NDP entry if no response is
received within 2 seconds. But firmware may take upto 2.5 seconds
to exhaust the NDP_END frame retries.
So, increase the timeout to 4 seconds to accommodate these retries
and to be inline with current NAN_DISABLE timeout.
Change-Id: Ida1abc25b4ff64aea810c88dbf36f9577b23ffd8
CRs-Fixed: 3002176
In a beacon template, there is a mismatch of twt responder bit in
HE caps and extended caps.
During start BSS, there is a kernel flag related with twt
responder. Intersect this kernel flag and service bit capability
before calling twt enable/disable api in start BSS.
Change-Id: I0725fc560904c622cc47f43958bcd490daacfa2f
CRs-Fixed: 2995538
HAL_RX_DESC_GET_80211_HDR is replaced by hal_rx_desc_get_80211_hdr
api. Due to this compilation error is seen.
Fix this by using new api hal_rx_desc_get_80211_hdr instead of
HAL_RX_DESC_GET_80211_HDR.
Change-Id: I52bbae9d1a58cb13c8e6706a47e300db824251f3
CRs-Fixed: 2992548
Use wlan_cm_is_vdev_roaming() API in wma, instead of
wma->interfaces[vdev_id].roaming_in_progress.
Change-Id: Icb88246b2c45c052a1d42dece4983b1e534fe608
CRs-Fixed: 2993180
