Add support to make WDS source port learning in lithium datapath
to be configurable.
Change-Id: I63eb64d6f46560a31f8e40a806d05d1dceddd784
CRs-Fixed: 2004658
Accoring to new meta header format mcs, nss, preamble_type and retries
information will present in rate_info field. Changes done to extract
these fields and update ext2 header to firmware.
Change-Id: I56926f39f2ba17446418c7eae0fd382247430df8
CRs-Fixed: 2003389
Changing the method DP queries WMA regarding
DBS capability. Now his call will be made through
policy manager.
Change-Id: I269537761a7acfa7e20a00c0ee7fc26ec1d17106
CRs-Fixed: 2025317
Remove debug message to print pdev id in
dp_tx_comp_process_desc to avoid flooding of
print messages on serial console
Change-Id: I141b59a9e477aec25f3d9f8a424397d382903d58
CRs-Fixed: 2017426
Add support to extract LRO information provided by
the hardware and utilize the support provided by QDF to
perform LRO.
Change-Id: I00a26573a450e9c32586b3d5fb656dbfe802cfac
CRs-Fixed: 1107169
Host support for Static and Dynamic chain mask selection.
parse new TLVs from ext service ready,copy tables to
wlan_objmgr_soc object.
CRs-Fixed: 2016643.
Change-Id: Ia4735eb4c7774c381df01f56696e8c86fc6c56ab
After configuting the external group interrpts called configuring api
to configure external group interrupts.
Change-Id: I9db8c9dc941421fa05676be732147929be24b0e6
CRs-Fixed: 2018655
packets received on a particular radio are queued to
a user configured reo destination ring.
Change-Id: I080090f22b80fd8d8868df4145b82888e1111cea
CRs-Fixed: 2017081
Remove the dependency of dma_map for align_pad calculation
move the dma_map to correct position after mesh mode header addition
Change-Id: Idd309ed47d82f68f97191048c582c1b429f3b378
CRs-Fixed: 2004658
Currently NAPI stats are retrieved as a part of iwpriv getStats command.
The buffer available for this command is limited and NAPI stats get
trucncated.
Add a new dumpStats parameter (9) to dump NAPI stats.
Change-Id: Iaf52a3dcecac2f7b24fde2f8220fbfddc767965b
CRs-Fixed: 1076563
Intrabss forwarding logic turns around bcast (ARP) pkts on the
SAP with peer source addr. So a AST lookup on AddrY results will
route the pkt to HW and not FW which is not the design. Fix is to
enable lookup only on AddrX in SAP mode.
Change-Id: Iea41c53fd818acfb8dbfd9ad1582e43ba1c4bc83
CRs-Fixed: 2029656
Add Invalid Peer stats on rx side
Add aggregation stats missing on Tx
API to update Rx Errors
Change-Id: Ib757ee7b89d9b9113e1a41b5a520faabb9ff28bb
CRs-Fixed: 1114641
Move the qdf_nbuf_map to correct position before align_pad is
computed for mesh mode header addition
Change-Id: Ia62137daea2ab09e93a86c4b9da681f5591ce947
CRs-Fixes: 2004658
Fix the logic to align a memory to the given boundary
and dma map the alinged address to the device.
Change-Id: I5cce07d5573949ab40f64cc08c937dfb7aa82b8e
CRs-Fixed: 2026493
Add API to handle NAWDS packets on tx side.
Add API to handle invalid peers and pass them to umac.
Change-Id: Ie8c2508e4f51c7d6969c9eb6439919c57dd427d4
CRs-Fixed: 2008205
Fix the logic that verifies that the dbs function pointer
in data path is valid.
Change-Id: I35418f2a66eb2d4b44260b005ab0d927d91eeac7
CRs-Fixed: 2025317
Reduce DP poll interval to 10ms and change per-packet prints in Rx path to debug level.
Also fixed HAL macros used to setup Rx buffer descriptors.
Change-Id: I112393a3f021b275dbe9da9df9c1bac584a96f3f
CRs-Fixed: 2026389
We are zeroing out complete peer structure after
initialing ast_entry queue. so re-adjusted code.
Also wds source port learning is called before we
pull the TLVs from the nbuf resulting in accessing
wrong src mac address.
Change-Id: Ifd5a2056a3f9f03a1ff1cf5b79046f932dd38510
We need to send the LRO and rx hash configuration to the
firmware during vdev attach. Currently they are being incorrectly
sent before WMI service ready indication.
Change-Id: I69680b48e6725c6deaad434d722546052cfe86b4
CRs-Fixed: 2022770
Window size needs to be incremented by 1 since fw needs to
represent a value of 256 using just 8 bits.
Change-Id: I18cdb6fb928f28893dc0e1fd2fb574a12ca53972
CRs-Fixed: 2025197
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
Changed the data type to store stats to 64bit
from 32bit to support larger number for stats
counter
Change-Id: I25eca626623503663b6aa8436217413609e2a807
CRs-Fixed: 2024225
Acked-by: Chaithanya Garrepalli <cgarre@codeaurora.org>
Change calls to qdf_dma_map_nbytes_single to qdf_dma_map to match with
qdf_dma_unmap used in tx completion path. Also fix the dma_addr value that is
passed to Tx HW; we were incorrectly subracting pkt_offset instead of just
subtracting alignment bytes from dma_addr
Change-Id: I2d6f32bd44e02824a1a788e3624dcb3680f1b242
CRs-Fixed: 2004658
After updating the skb with meta header cache flush is not happening. This
is sending incorrect meta data to firmware. Fixed this by doing cache flush
after meta header updation in skb.
Change-Id: I0952093e3080f5b8ec2233e6ab1edf4f48351603
CRs-Fixed: 2003389
Ampdu count is populated in pdev
but zeroed before printing. Fix it to
be populated in peer and aggregated
in pdev before printing
Change-Id: I51d8f1968a87c0b9dbf53928acd1bbef45acc7ec
CRs-Fixed: 2025785
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Refactor flush rx queue function call based on soc by adding an
interface to CDP funtion indirection table.
Change-Id: Iea201553f555a6c317cf37e586433aa493e51623
CRs-fixed: 2023399
Add structure changes for querying WDI-stats, register the callback
functions for IPA to query WDI stats and sets the quota limit
Change-Id: I05d9d50fad735fa0a57c4de23c81461f6e12b648
CRs-Fixed: 1095710
Use normal allocation instead of alloc_consistent for REO descriptors to
allow freeing from interrupt context.
Also fixed an issue in ba_window_size setting in REO queues.
Change-Id: I91b06e04c0343eb7fe8580d8655c6bc5e33cfe06
Separate out pdev detach processing as ol_txrx_pdev_detach()
and ol_txrx_pdev_pre_detach() corresponding to pdev attach
functions ol_txrx_pdev_attach() and ol_txrx_pdev_post_attach()
respectively.
Change-Id: I7fdbe70ad8262a57b61a742fcfb2779e323172af
CRs-Fixed: 2011937
Introduce a new iwpriv command txrx_stats to
print host and firmware statistics for lithium
chipset
Change-Id: Ib048c64f903c7a97508f8b03bebe7f7c1d9e6c05
CRs-Fixed: 2017426
Setup all TID queues during rx peer init
Add support to handle ADDBA HTT msg
Allow pkts to be fwd to stack even if peer isn't found
Change-Id: Icdfec2eeaa3e0ca62202ed278cd63209b8f79cb2
CRs-Fixed: 2016138
Add command to set mapid for each VAP using:
iwpriv athX s_dscp_mapid N
Add command to change tid values in PDEV maps using:
iwpriv wifiX s_dscp_tid_map <MAP_ID> <TOS> <TID>
Change-Id: I510a40e71ecec5c453dd2dff1b13fd5ebedbe98a
CRs-Fixed: 1108452
Add per peer stats
Add support to update APSTATS
Change QDF_TRACE to DP_TRACE for improved readablility
Change-Id: I4be2adf2a1d7f978eb2961a544435d525c97923d
CRs-Fixed: 1114641
This change includes:
- Adding the hooks to send LRO and hash configuration to the firmware
- Configuring the REO remap registers
Change-Id: I6d83e2a2365647f2c7a6440bd1d4b42fa7df7eff
CRs-Fixed: 1094775
The interrupt polling timer needs to be disabled when the host
device driver decides to unload. Not handling this would cause
in processing of pending interrupts and access data structures
that are being deinitialized causing system instability.
Change-Id: I505281f36f90bef6e1fbf21a5461260272f7c7cb
CRs-Fixed: 2013609
