Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
In case of WIN hal_soc will be freed in wifi down
path, this pointer is not valid at pdev_detach or
soc_detach.
Change to populate dmac source ring flag to dp_soc
as access is needed at pdev_detach or soc_detach
Change-Id: I628746bdd05ba3791d3d0e6b6dfdf160ed368e9a
Split setup API for IPA Rx Refill Ring into allocation and
initialization APIs and call them at pdev attach and pdev init
respectively.
Similary split cleanup API into deinitialization and free APIs
and call them at pdev deinit and detach respectively.
Move procedures related to IPA Tx and WBM rings from pdev to soc.
Also add cdp support to set ipa cfg parameter in soc_cfg struct.
Change-Id: I04bb9270ae2dff51746a42b358fbe346f1087f84
CRs-Fixed: 3053542
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
As part of code change we are removing csum_enabled flag check.
In that case, csum_enabled becomes redundant since we are not using it
in the code base, So remove redundant code as part of the cleanup.
Change-Id: Iac411b20f06436053b1969a1af9e3b3ee418c34c
CRs-Fixed: 3070858
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
Repurpose the IPA tx and tx completions rings for
normal use when IPA is disabled either via config
flag or ini.
Change-Id: Ia4b6a89c73d888a217bdef40e3c05435c3bb1bb2
CRs-Fixed: 3059730
Add API to get dp peer authorize state.
Also modify dp_tx_get_rbm_id_li to update rbm for IPA offload
scenario
Change-Id: I0f8cca4623a1c3b840f336aa6d67740951cb6700
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
This change is used to provide an API for PMO module to
check whether there are pending TX frames before HOST sends
wake up indication to FW. PMO module uses this to indicate
FW whehter to discard HWDTIM.
Change-Id: Icc3271e87e376e3313fddc5f4f99e39daeaf6af7
CRs-Fixed: 3046947
TP and HP values are assigned wrongly while
printing ring history. Fixing assignment.
Change-Id: I50ea90a3b49ab4d5459a3e0ddfa259f669764433
CRs-Fixed: 3051531
Add a CDP api to update the packet capture mode in dp_soc
when it get updated by user using vendor command.
Change-Id: Id0856aeeb5e1a77e1ce6fb23562fdbff4a2fb320
CRs-Fixed: 3048344
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
The multicast echo check feature is moved to hardware in
Beryllium. Enable this hardware feature and also disable
the MEC handing code for Beryllium in the host.
Change-Id: I86d319963191f3ed77aba16dcccbc659906edd9f
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
Currently mon_intr_id_lmac_map is set only in poll mode
Which is only in Global Monitor mode.
In case of dynamic switch from STA to Monitor Mode
This can cause issue while removing monitor mode
Initialize mon_intr_id_lmac_map in interrupt mode also
and add sanity check for mon_intr_id_lmac_map value in
monitor ring flush.
Change-Id: Ic7dae948078661e376541b30aa70e4e12ca9d24f
CRs-Fixed: 3037952
Ring name for RXDMA Monitor Desination Ring is missing which
results in printing Invalid Ring in backpressure prints output.
Add string name for same.
Change-Id: I02848d296bd08aa2ac9dda767e0db1475012a162
Dump flow pool stats even for low verbosity level as
part of periodic stats display.
Change-Id: Iea59d20b0a81cfd0bfdac65ad54a11fa33f30f2f
CRs-Fixed: 3031168
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Host updates BAR info to H.W when out of order or 2K jump
BAR frame is received. But some AP's frequently transmitting
out of order BAR frames even before reception of all the
frames in the current window, if station updates window
and SSN based on BAR frame, RX frames sequence number in
older window range which are yet to be received suffers
REO aging timeout and causes RX packet delay to avoid
this skipping BAR update to H.W conditionally.
Change-Id: If56571ffc0dc0880d7104ea3bb193ed9766124dd
CRs-Fixed: 3015643
When kernel calls driver callback to get stats, dev_get_stats()->
ndo_get_stats64() .Host driver allocates memory using
kmalloc (size, GFP_KERNEL) routine,
but as ndo_get_stats is under RCU lock but not in interrupt
context(in_irq = 0, in_interrupt = 0, irq_disable = 1),
qdf_mem_malloc () uses ‘GFP_KERNEL’ to allocate memory,
leading to backtrace.
As per kernel doc
(https://www.kernel.org/doc/Documentation/networking/statistics.rst),
while in ndo_get_stats64 () API, driver should not calling a routing
which can sleep. Use atomic variant of qdf_mem_malloc() to fix this.
Change-Id: I3585b93d227a36b4b01c9c4f72d878c6cdb44cd4
CRs-Fixed:3020603
Add support configure ipa tx ring and tx completion ring for
2.4G and/or 5G separately.
Change-Id: Iafb8fa589ff0cce15609a3dfa2209364291d7cef
CRs-Fixed: 2996604
Add dedicated monitor flag at SOC level and do not
enable legacy monitor rings for QCN9224
Also add flag to disable rxdma2sw ring for QCN9224.
Change-Id: I399d22d6c3361bb75ebaad4e46b156db5e628d6b
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
