When CONFIG_HL_SUPPORT is defined, htt_rx_dbg_rxbuf_init is not called,
and rx_buff_list_lock is not initialized. rx_buff_list_lock should not
be destroyed if it is not initialized.
Do not call htt_rx_dbg_rxbuf_deinit when CONFIG_HL_SUPPORT is defined.
Change-Id: I9d64313efd5a9978b3fb953ac5d7ffb466abe010
CRs-Fixed: 2134345
Add wlan_objmgr_peer_debug_log() calls in WMA, ol_txrx for
tracking of peer create/delete/map/unmap events and related roaming
events. These calls, added in lnx.1.1 driver in different change lists,
are consolidated in this change.
Add wlan_roam_debug_dump_table() call to the functions that perform
recovery after detecting peer deletion error.
CRs-Fixed: 2130256
Change-Id: Ia3bb6a01b2f62889fe542a02ca42ffab5a8a76aa
Add "static" before some functions which only be used in 1 file to
resolve compilation error.
Change-Id: Id1b1101c3bb04910ad1e3639887f74e44d5b7c36
CRs-Fixed: 2010227
Add warning log at the critical code path of IPA session transition
for the race condition detection
Set INFO log level to enter/exit logs for IPA session transition
code path.
Change-Id: I5089db5f53d13e5f78093171672ad86f7bd1cdc2
CRs-Fixed: 2124144
In case host receives a paddr in a HTT_RX_IN_ORDER_IND_PADDR msg
from FW that is not found in the rx_hash, instead of forcing an
APPS crash, iniate a host-triggered recovery. If the feature
is not enabled, this would be equivalent to the old code.
Change-Id: Iaab5329c13d626c4b94c690f5537899eecf2637b
CRs-Fixed: 2084522
Currently there is no support for management MGMT TXRX
component over HTT endpoint and supports only over WMI.
As a result for platforms which does not support MGMT
over WMI will break other components which uses MGMT TXRX
component to send mgmt packets. In this change support MGMT
TXRX component over HTT.
Change-Id: I414269abb5a5c616cc890dab450a7782e6829d0e
CRs-Fixed: 2128213
Packet log ops are protected against load-unload and SSR, but not
against module stop. Take care to add check for module stop.
Also takecare to NULLing of wdi_event_list and NULL check before accessing.
Change-Id: I20d49ff587719fc14f60a53e86092383de6ef5b8
CRs-Fixed: 2082135
It has been observed that prints are adding significant overhead
to the period a lock is being held. Move the prints outside of lock.
Change-Id: Ifc84b562bc294ae2348f6d152b2852c21c963762
CRs-Fixed: 2040486
Fix NAPI and flow pool info logging levels. NAPI stats are showing up in
kmsg, when they should not. flow pool stats are simply not showing up
since debug levels are disabled for TXRX module.
Change-Id: I5fa3ca24cf3c31c2cf5183ccf9044eb085153da7
CRs-Fixed: 2127633
For WLAN FW-host interface file automation, need to pull in WDI IPA
interface definition file wdi_ipa.h, into WLAN host driver.
This change is to match host dirver MACRO names with wdi_ipa.h.
Enable back CONFIG_IPA_OFFLOAD flag in Kbuild.
Change-Id: I9cd0c3b942c0a7b5e98f589090ae51cc0acf67c2
CRs-Fixed: 2085741
There is a gap for the NON_QOS queue setting in the SDIO WLAN TX
scheduler, which will cause certification test case fails.
Change the setting same as qcacld2.0.
CRs-Fixed: 2123022
Change-Id: Iedfa048ec9c3d293b05903ce4f2eba4ef07c020e
Introduce a new parameter in the ini file for the maximum
number of MSDUs per HTT_RX_INORDERIND message.
This parameter is now sent over to the FW through the RFS
configuration message.
Change-Id: Id0057861bc172a36483804170274b202198b6824
CRs-Fixed: 2106760
Some data path code change didn't consider SDIO code path, so
introducing some build error for SDIO driver. Fix them in one
submission to enable ACI
Change-Id: I3d1b81c57a8ae854f18db3eccb546b7b552899b7
CRs-Fixed: 2033757
Currently during peer initialization (ol_txrx_peer_attach), we are
initializing peer refcount to 2. This is done to prevent peer
deletion, in case some logic tries to delete a peer when the host has
not received peer map events.
The above logic fails to address the condition when there is roaming
failure, followed by peer deletion from userpace. In this case, host
tries to create a peer and initializes refcount to 2. However, since
roaming fails, firmware does not send out peer map events. In the
meanwhile, the framework tries to delete the existing peer. This
deletion following the peer creation and absence of peer map leads to an
incorrect peer refcount even after deletion and hence this peer does not
get deleted.
Initialize peer with refcount of 2 but 1 instead. In case a map or
unmap arrives after peer deletion, the existing logic will
try to find a peer in the peer hash bins or peer_id_obj_map and will
not find the peer.
Change-Id: Ia3ba6842122dba49281d7bd00303cbe7685ef91c
CRs-Fixed: 2087373
Add debug logs to capture htt rx_ring info during data stall
detection for FW_RX_REFILL failure reason.
Change-Id: I6733a37677ebccfef5096ac38858c4505e8665b6
CRs-Fixed: 2121686
Add ini param 'gtsf_ptp_options' to control
PTP options, it's a bitmap:
bit0 - PTP_OPT_RX(0x1)
set this bit to enable RX time stamping
bit1 - PTP_OPT_TX(0x2)
set this bit to enable TX time stamping
bit2 - PTP_OPT_RAW(0x4)
set this bit to use raw time as timestamp
bit3 - TSF_DBG_FS(0x8)
set this bit to add device attriubte 'tsf' for iface
The default value of gtsf_ptp_options is 0xf
Propagated from qcacld-2.0.
Change-Id: Ie53d503bdd2e85790502583a238ee138f4bcf6c6
CRs-Fixed: 2079466
Add support to post data stall event to sys message queue
to handle it in data detection module and finally post
diag event to QXDM. Add support to send NUD failure
diag event.
CRs-Fixed: 2086176
Change-Id: I72ba36d4c2f6ef2eb495ad1586f74af0f3c69254
Add data stall detection module in hdd which handles data
stall reported by host or fw and take necessary recovery
steps based on the data stall type.
Change-Id: Idf6c43f55d1bc115a0c06b4c6ef766ff3ed09bee
CRs-Fixed: 2090643
Add Vendor Event to get the driver hang reason indicating to the
user space that the driver has detected an internal failure.
This event carries the information indicating the reason that triggered
this detection.
Change-Id: I3934f2a18c796ed3b53175dcbe7efd7f4d1409b9
CRs-fixed: 2098498
Add net buff pop fail counter which helps to debug issues
related to scenario when RX ring fill count exceeds the fill
level.
Change-Id: I00f4a4e245e0732ef04518e4c1db95999edc6687
CRs-Fixed: 2106523
HTT_RX_HOST_LATENCY_WORST_LIKELY_MS is changed from 10 to 20
for Helium support. But 20 is aggressive for Rome and traffic
hang is seen.
Fix is to define HTT_RX_HOST_LATENCY_WORST_LIKELY_MS as 10
for Rome support.
Change-Id: Iaaa86ed70d145ac9898300e9b678008781215617
CRs-Fixed: 2050912
Currently ol_rx_data_cb() calls cds_get_global_context() but then
doesn't do anything with the context other than verify it is not
NULL. Since the context itself is unused, remove the unnecessary call
to cds_get_global_context().
Change-Id: I42a0aa1adba5ba25a95cf22523153356e3976b47
CRs-Fixed: 2115512
ARP/NS/NA packets will not get chance to be transmitted if
netif queues are paused due to low tx descriptor availability.
Send ARP/NS/NA packets from HI PRIO queue so that it can be transmitted
in noisy environment.
Change-Id: Ibb414463d1471c19d5db99e12517c77b02564318
CRs-Fixed: 2081348
Clear the tx desc ref_cnt in ol_tx_desc_free_common as
ol_tx_desc_free independently get called from some places
during failure cases.
Change-Id: I705061558a0419785091e0e1d0605e317e479188
CRs-Fixed: 2071116
Make the following changes to fix the issue:
- Wrap TSO seg unmap code inside a spinlock
- Add TSO descriptor DUP detection logic before unmapping TSO segs
- De-initialize TSO seg freepool after in-use Tx descriptors have been
de-inited
Change-Id: I63b100879b302e4919c2952143509e76c14b36ec
CRs-Fixed: 2018317
Stats printing with excessive loops should not go to the console.
Avoids watch-dog bites.
Change-Id: I2ff67827d8bb975bc4ddbb4d70c88283e8ea231e
CRs-Fixed: 2088027
qcacld-2.0 to qcacld-3.0 propagation
The txrx_fw_stats cmd will allocate a req object before sending the cmd
to the firmware, this memory is only freed when get response from firmware.
The memory leak will appear if the firmware doesn't response in time before
the driver unloading.
This fix will add a pending queue to trace this req object in the pdev.
when pdev is detaching, it will clean up this queue to avoid memory leak.
Change-Id: I35f6216d35befbab978bba161252b305488bd34c
CRs-Fixed: 2116408
At IPA UC detach after free IPA TX resource TX comp
ring and TX CE index pointers reset them to NULL.
Change-Id: If6a1b2857d14f5fff2f47e541156ce2c27fb33a3
CRs-Fixed: 2111959
Recovery is triggered if rx hash table look up fails due to invalid
physical address. Since netbuf is not found in this case and null
netbuf is de-referenced after recovery is completed and this leads
to null pointer exception.
Exit gracefully if netbuf pop fails from rx hash table.
Change-Id: I66b3d1cf9aa05da235212923a551e58d86153e55
CRs-Fixed: 2094521
When system is under low memory condition and skb allocation fails,
RX ring msdu is not attached in ring replenish logic and Ring refill retry
timer refills the ring debt at the interval of 50 ms.
If refill retry fails to allocate the memory, refill debt is not updated and
this is resulting in retry logic failure.
Update refill debt when retry allocation fails to allocate
rx ring msdu.
Change-Id: I4d2230e4984e26b44db663e7e7f20c73ae90b0f0
Do memzero of htt_frag_desc inside HELIUMPLUS flag as
htt_frag_desc is defined only for HELIUMPLUS.
Change-Id: Ie738881c5330956b24376f145f03dd977bf88f7b
CRs-Fixed: 2096935
Presently, htt_frag_desc is not getting zeroed out explicitly.
So fw can take the invalid/garbage data in the frag information
and treat it as a valid address which may lead to crash.
Memzero htt_frag_desc before use.
Change-Id: I9dadcb883a65c43f96e810a12b4fb491c3a2e734
CRs-Fixed: 2088448
Add logic to mark first wakeup packet even if offload bit is not set in
the htt rx indication message sent by fw.
Change-Id: Ide50dcfcf88ecd0c71b32b0e746742dc49d08567
CRs-Fixed: 2110627
Currently, in monitor mode, beacon frames are showing an incorrect phy
rate (0). This is because the values in the RX descriptor for
interpreting the legacy rates have changed in ihelium.
Make changes in host to interpret the new values into data rates correctly.
Change-Id: Ibf845666943fd718b657c0128758dabfb64a38ef
CRs-Fixed: 2082456
As WAPI spec, once USK rekey, PN need reset to 0x5c37, but IWNCOM AP
will send 1st packet with old PN larger than 0x5c37 after rekey, So PN
check failed for later packets.
Fix: Don't update Last_PN when receive the 1st packet from AP after USK
rekey, Last_PN keeps 0x5c37.
Analysis:
1. Host installed new unicast key after rekey handshake with AP.
2. Host Last_PN was updated to 0x5c37 as spec (expect PN of next
packet from AP is: 0x5c39)
3. Host received ping request from AP with old PN 0x5cb9
4. Host PN checked passed, driver Last_PN was updated as 0x5cb9
5. Host received ping request from AP with new PN 0x5c39
6. Host PN checked failed since 0x5c39 < 0x5cb9, ping request
dropped, no response.
Change-Id: Ifd0269193ffbe53889191269a0e985d13ea2ecf7
CRs-Fixed: 2101217
* Log EAPOL, ARP, DHCP, MGMT, ROAM Events, ICMP, Data packets,
TX-Completions by default.
* Set default verbosity as low (existing is high)
* Throttle ICMP and Data packets if threshold exceeds.
* Enable live mode by default. Added ini entry to disable
it and configure high throughput thresh - gDptraceConfig
* Log only SA and DA for proto packets (and not 32 bytes)
* Format prints to fit in 1 line.
CRs-Fixed: 2051134
Change-Id: Ia94732e49023950f458a7402650d4b8f5e1d5563
The cdp_peer_ops register_ocb_peer() method currently takes a cds_ctx
parameter. Converged datapath APIs should not require the MCL-specific
CDS context, and in fact it is not required by the MCL implementation,
so remove it from all OCB peer registration APIs.
Change-Id: I873eeb472f463ac76f30de5a9013783565be916d
CRs-Fixed: 2103451
Currently ol_rx_pkt_dump_call() calls cds_get_global_context() to get
the global context. At one time this was necessary since the global
context was required to get the module-specific context. However the
global context is no longer required, so remove the unnecessary
retrieval of the global context.
Change-Id: I8a2e66252bfd445151575502b06b132866a286fe
CRs-Fixed: 2102494
