Add support to update key management with higher security
after BSS create response.
Also, Currenlty if there are multiple AKM and ucast cipher.
Host overwrites AKM and ucast cipher value with the new one.
Instead of overwrite, add support to do ORing to keep all values.
Change-Id: I679a86debef649efbce1a08b60512d127f7fbbee
CRs-Fixed: 3113222
Rename files with blacklist/whitelist to denylist/
whitelist. Rename files with blm to dlm.
Change-Id: I6f533c30c664aaaf713cdd2e2e34f9528df139b5
CRs-Fixed: 3099867
Adding new API to bypass scanning and connection
restrictions to bss operating in 6GHz with different
country code.
This API is based on a cfg item which can be configured
separately from safe mode or rf test mode.
Change-Id: I47396ac8793172e94499377cb0b980f7eee0f39e
CRs-Fixed: 3135147
Due to the nature of discrete channel lists for each
power mode on the host driver, it is currently not
possible to scan 6GHz channels which are not part
of the operating regulatory power mode.
To enable scanning all 6GHz channels irrespective of the
regulatory power mode (i.e., standard, low, etc.), the
existing sanity checks for the regulatory current channel
list need to refer to the super channel list
instead.
Additionally, these sanity checks need to check the
channel state and flags for the best power mode instead
of the current power mode. This will allow the scan
manager to access all 6GHz channels irrespective
of the current regulatory power mode.
Multi-band operation (for radios operable on 2.4GHz,
5GHz and/or 6GHz) is also ensured in these sanity
checks.
CRs-Fixed: 3140935
Change-Id: If10c617834dd89f4bbd99669318fd84c63421755
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
Currently, total_weight is not initialized before calculating
default ML BSS weightage with INI configuration. This may result in
unexpected behavior.
To resolve this, calculate ML bss weight after calculating non-ML
BSS score weight.
Change-Id: I4b9455e0ce69dec5c837f92acad60ac83cdd2502
CRs-Fixed: 3127454
Currently, the code does not handle an MLO connect when in
non-init state. Add logic to clean up any existing connection
before going ahead with the latest request.
Change-Id: Ia5a10bcc1e0d2c8e82d6ea0d82d1a5bf0604a1e5
CRs-fixed: 3116687
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer and wait for a
maximum of 6 seconds for the response. Host can stop the timer and
allow the commands to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is
received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Change-Id: I4577f9b0aac71c0c86bd32b59e69d9527bf107b9
CRs-Fixed: 3106032
Before MLO sta partner link is up, FW can't indicate CSA event to host.
For this case, host need save csa parameters and process it when MLO
sta partner link is up.
Change-Id: Id1803f32787002e020c6899ec72e428feb765b7f
CRs-Fixed: 3082438
Save quiet status of indicated link to sta contect of MLO mgr. Any link
should check quiet status of MLO connection, then decide whether it
can trigger inactivity to FW or not.
Change-Id: Ic294bbe6452030b6cae495ca0dd3e504416e2c9e
CRs-Fixed: 3117825
Host driver creates two vdev as part of initial connection.
If the connected AP supports MLO, both(sta and link) of the vdevs
would be moved to UP state. Otherwise, link vdev would be in INIT
state and not moved to UP state.
Firmware sends roam sync indication to host when it roams to a
new AP. The event carries new AP info and the new AP could be
MLO AP. If the current AP is non-MLO and new(roamed) AP is MLO AP,
move the link vdev state to UP as it's in INIT state.
Change-Id: Ib5dd216074d68b0001755024153263ba9654edbe
CRs-Fixed: 3106059
There is a difference in the macro used in the
MLO multicast macro used in control path and DP
Changing the macro to be the same as DP code.
Also fixed minor issue in the MLO mcast WMI
identified while testing with the macro enabled.
Change-Id: I0c24a69628336f74d627863dd4bd4c4bef685b6c
CRs-Fixed: 3102733
Since the op_puncture_bitmap is updated to indicate 1 as
subchannel punctured & 0 as subchannel not punctured, flip
the puncture pattern sent to target as target still expects
the punctue pattern to be in old format where 0 represents
subchannel punctured and 1 represents subchannel not
punctured.
Change-Id: Iba1daf79df74b4b36c65d00d8959db8d88ad0d1b
EHT operation IE contains disabled subchannel bitmap, which providing
a list of subchannels that are punctured within the BSS bandwidth.
Throughput is affected if subchannels are punctured, refer to system
document to get new bandwidth score for different puncture pattern.
Change-Id: I91b9a7ec4331e78373440d4c97eb9f1ba6c45b4c
CRs-Fixed: 3098009
As per the spec,
"A STA affiliated with a non-AP MLD, that operates on Link2, transmits a
(Re)Association Request frame to AP2 requesting Link1 as one of the links
for multi-link setup. Since the (Re)Association Response frame is
transmitted by AP2 after the last Beacon frame on the initial operating
class/channel on Link1 and before the first beacon on the initial
operating class/channel is transmitted, AP2 includes the Max Channel
Switch Time element in the per-STA profile corresponding to AP1 in the
(Re)Association Response frame it transmits. The value carried in Max
Channel Switch Time element provides an estimate of time until the first
TBTT on the new channel on Link1."
Hence, calculate the remaining max channel switch time using the below
steps.
When host receives the CSA complete event with the CSA count 1, calculate
the Max channel switch time for each vdev by adding the below values,
a) Host triggers the channel switch when CSA complete event is
received with the CSA count 0. The time difference between
CSA count 1 and CSA count 0 is one beacon interval. Hence, add
one beacon interval.
b) Add the channel change time. The total time required to receive
CSA event handler from FW with CSA count 0, plus, the time required
to process the CSA complete event, plus, the time required to send
multi-vdev restart request for all the vdevs in the new channel and
send updated beacon template (only for non-DFS channel) is
approximately 1 second (added a few milliseconds as delta and
considered 16 AP vaps here).
c) Add DFS CAC duration of the new channel if the new channel is DFS.
d) Add one beacon interval time (time required to send the beacon on
the new channel after VDEV up).
e) Store the sum of the above time values in max_chan_switch_time of
the vdev_mlme object.
f) Save the current time when host receives CSA complete event with CSA
count as 1 in the last_bcn_ts_ms of the vdev_mlme object.
Calculate the remaining channels switch time using the below formula.
- Remaining channel switch time is equal to the time when the last beacon
sent on the CSA triggered channel plus max channel switch time minus
current time.
Reset the max channel switch time and the last beacon sent time after
sending the VDEV UP command to FW.
Change-Id: I7c03bfae5e159419a6c9462591aeb2d6c5b4fb87
CRs-Fixed: 3076245
When do SAE-5.7.3 certification test case, STA will choose non SAE-PK
AP to connect which is wrong expected result, non SAE-PK AP beacon
will carry with QBSS IE that contributes more score than SAE-PK AP
score config.
Fix is to give SAE-PK AP more score to pass SAE-5.7.3 certification
case.
Change-Id: Ib3e516ccfa673e19f9bf0869aeffe4f5b1862a71
CRs-Fixed: 3101317
Currently, VDEV manager responses are using legacy path instead of
target_if, vdev_mgr and os_if components. As the driver implementation
is planned for converged model, legacy implementation will be moved to
the respective components.
To avoid rework, Use target_if, vdev_mgr and os_if components to process
the FW responses corresponding to the vdev manager.
Change-Id: I778f6de93481fc730383e8f8e1c604f173947d69
CRs-Fixed: 3093776
- Add MLO Quiet IE related parameters in ml_bcn_partner_info structure.
- Populate MLO Quiet IE related parameters in the beacon template.
Change-Id: I5a4a069d067bdbc5e7c44c407f51a504e9aba151
CRs-Fixed: 3088019
Presently, whenever there is any kind of reference leak in the system
wlan driver doesn't recover and goes into a bad state.
Add support to forcefully reset the vdev response timer so the system
can gracefully recover and wifi can be functional.
Change-Id: Iab705c17f4313e4b8efd980d5427bf8d4ce9496f
CRs-Fixed: 3051962
Add change to move mlo mast functionality under AP mode check as it is
specific to SAP mode only.
Change-Id: Ib5254873331a095f69638137e46697d8de352a2f
CRs-Fixed: 3092320
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address.
This is resulting in connection time increase when MAC address
randomization is enabled for every new connection.
To optimize the connection time, add support to update the MAC address
without bringing the interface to down state.
Change-Id: Ic3eff6a9571f885292021b2c178d26b0eace5042
CRs-Fixed: 3063475
Add change to rename peer create in MLO scenario to include MLO prefix
to void interpretation with generic peer create
Change-Id: I0ebf15964390275270e8b02d1e87df8532c63a0b
CRs-Fixed: 3075987
Replace the state check logic with the existing implementation
that is used to check if VDEV can allow peer create.
Change-Id: I7141ef4ace73e3aacee27e423b42c6c59c509b13
CRs-Fixed: 3075987
If the MLO module is sending link disconnect from the north, retain its
disconnect source. If it is a southbound disconnect, update the source
to be from MLO manager. This is needed so some legacy modules handle the
disconnect properly and send vdev stop when appropriate. Also make sure
that the SB disconnect will be processed if the link is in connecting
state.
Change-Id: I6644751934697496147b9177ee7beab4d7355e10
CRs-fixed: 3086012
With existing STA code changes, The vdev crypto params are filled
in cm_connect_active() but when STA tries to roam from WPA2 AP to
WPA3 AP or vice versa, the new keymgmt of AP2(AP2 keymgmt is FT-SAE
if STA roams from WPA2 to WPA3 and AP2 keymgmt is FT-PSK if STA
roams from WPA3 to WPA2 AP's) is not updating in the vdev crypto
params instead it holds the AP1 keymgmt.
So, Adding changes to update the vdev crypto params from the connect
request structure during roam.
Change-Id: Ia0ddd6192a45f5d9e37b44665aded5a1fc573243
Clear MLO cap only when it is the last disconnect req as osif would not
have informed userspace for other disconnect req because of
cm_id mismatch
Change-Id: Ifcfde3e0efd6fb28e73679cbbccfa6f64ed35902
When connect from wpa_supplicant and roam from F/W happens at same
time, supplicant hold cm cm_req_lock and wait rsp from scheduler
thread, sheduler thread is blocked to wait for cm_req_lock.
Change-Id: I6b9010972d29be9a32d3b85ee72891ed62b50801
CRs-Fixed: 3087193
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to FW at the time of vdev creation in wmi_vdev_create_cmd.
FW uses this vdev_stats_id to fetch the stats from HW.
Add logic to convey vdev_stats_id to FW at the time of vdev create.
Change-Id: I91782c73a7f3f94175a0c28ab4adda2d894856db
CRs-Fixed: 3069992
For MLO, we need to designate one of the link vdev
as mlo vdev, on which FW will accept the multicast
frames and for the other link will drop the mcast frames.
So as part of vdev start, we indicate the mlo mcast
vdev in the first vdev of the mlo.
Change-Id: Ic962a6e1fead4a3cab7c622583392ecf373f4783
CRs-Fixed: 3080525
Add support to extract the freq, cfreq1, cfreq2, PHY mode, Destination
macaddr, and channel BW values from the RTT measurement request buffer
received from the LOWI application. Pass these values to a registered
callback. Users can use these values to make some decisions on the RTT
scan.
Change-Id: Idb2232c07bbfa2946dc01e75908b9a6036597ecf
CRs-Fixed: 3060685
In case the vdev is already disconnected, the indication to
the upper layer, would have been sent as part of previous
disconnect/connect failure.
If the upper layer is in process of connecting, sending
the disconnect indication back again may cause it to incorrectly
think it as connect failure. So sending a disconnect indication
again is not advisable.
So if a new disconnect is received in INIT state, drop the
disconnect and return failure.
Also remove osif_cm_reset_id_and_src() from osif disconnect
to avoid race between disconnect complete of old disconnect
and new disconnect request. With osif_cm_reset_id_and_src()
old disconnect might also get dropped in osif and with this
fix new disconnect will also get dropped, so make sure that
last/old disconnect indication is sent to upper layer.
Change-Id: Icf7352d8904473329edff9ec124c6197f214f88b
CRs-Fixed: 3074093
