Currently definition of wlan_reg_get_power_string is
present for 6G only which may cause compilation issue
when 6G is disabled.
Fix is to add definition of wlan_reg_get_power_string
for both 6g enable and disable case to avoid any compilation
issue.
Change-Id: Iaad8f16543306e6ac09e76546062fae554124c1e
CRs-Fixed: 3150997
Print ref_id in all debug prints. It will make sure even if
string value is not added in string_from_dbg, there will be ref
id to debug leak issue.
Change-Id: If35a298239dd09cb4169474da34e30e85a2cde92
CRs-Fixed: 3147857
CLEAR_PARAM failed to clear bit at bit position of "val". This change
correct to ((__param) &= (~(1 << (__val)))).
Change-Id: I20a9203592c0f48c3d2999985edd8ff81f55eb9d
CRs-Fixed: 3137825
Enable the wmi_service to fetch the radar found cfreq from
wmi_service_radar_found_chan_freq_eq_center_freq.
Add changes in DFS random channel selection algorithm
(1) To find a channel of input width 320MHZ. Since 320MHZ in 5G
is 240MHZ (320 - 80 punctured), there are 12 valid 20MHZ subchannels
possible in 240MHZ. Validate the continuity of 240MHZ channel before
declaring the channel to be found.
(2) To find a fallback channel for the input channel
width of CH_WIDTH_320MHZ. The fallback channel of 320MHHZ is
160MHZ.
CRs-Fixed: 3149475
Change-Id: I03cac7f090de20efd912402b5e4df543b47aafed
Add support to update key management with higher security
after BSS create response.
Also, Currenlty if there are multiple AKM and ucast cipher.
Host overwrites AKM and ucast cipher value with the new one.
Instead of overwrite, add support to do ORing to keep all values.
Change-Id: I679a86debef649efbce1a08b60512d127f7fbbee
CRs-Fixed: 3113222
Rename files with blacklist/whitelist to denylist/
whitelist. Rename files with blm to dlm.
Change-Id: I6f533c30c664aaaf713cdd2e2e34f9528df139b5
CRs-Fixed: 3099867
For platforms which CONFIG_BAND_6GHZ undefined, build failed for
implicit declaration of function
reg_convert_supported_6g_pwr_type_to_ap_pwr_type.
Change-Id: Iefaef8ea64f76f07e040403ada145c99c29db19a
CRs-Fixed: 3147319
Function wlan_cp_stats_twt_get_peer_session_params() is missing
its documentation block, so add it.
Change-Id: I050d45df1861de02998039b76c8c2a7da59af669
CRs-Fixed: 3137344
API reg_get_channels_from_opclassmap populates channels from opclass map to
reg_ap_cap as supported and non-supported channels. But for 6g opclass 133
and 134, non-supported channels were also getting reported as supported
channels.
This was due to an error in the logic of reg_get_channels_from_opclassmap
API for opclass 133 and 134. The 20Mhz channels towards the end of the
channel list in the op_class_tbl were causing the issue.
To address this issue, add a logic to get the supported and non-supported
channels from the cfi list object of op_class_tbl for 6GHz in the
reg_get_channels_from_opclassmap API. Also remove the 40MHz centre channel
calculation condition for 6GHz in reg_get_chan_or_chan_center API as it is
being handled in the new API.
CRs-Fixed: 3133022
Change-Id: If6ea18f79786c8549a1c75c557adffa178dd5c71
Add the supported 6g power types dispatcher APIs to
i) get the best 6g power for a given frequency.
ii) convert input 6g ap power type to supported 6g power type enum.
iii) get the 6g ap power type from supported 6g power type enum.
Change-Id: I4b8bce5f23c7c0b95f9192ff20d90a908b3e0bd7
CRs-Fixed: 3110989
Adding new API to bypass scanning and connection
restrictions to bss operating in 6GHz with different
country code.
This API is based on a cfg item which can be configured
separately from safe mode or rf test mode.
Change-Id: I47396ac8793172e94499377cb0b980f7eee0f39e
CRs-Fixed: 3135147
Due to the nature of discrete channel lists for each
power mode on the host driver, it is currently not
possible to scan 6GHz channels which are not part
of the operating regulatory power mode.
To enable scanning all 6GHz channels irrespective of the
regulatory power mode (i.e., standard, low, etc.), the
existing sanity checks for the regulatory current channel
list need to refer to the super channel list
instead.
Additionally, these sanity checks need to check the
channel state and flags for the best power mode instead
of the current power mode. This will allow the scan
manager to access all 6GHz channels irrespective
of the current regulatory power mode.
Multi-band operation (for radios operable on 2.4GHz,
5GHz and/or 6GHz) is also ensured in these sanity
checks.
CRs-Fixed: 3140935
Change-Id: If10c617834dd89f4bbd99669318fd84c63421755
When mlo_dev_ctx is not initialized, it causes NULL ptr
access causing crashes.
Add NULL check in mlo api's to avoid the issue.
Change-Id: Icd7472cab22e3ff441cc9327f0443adb939bbc05
CRs-Fixed: 3143777
Currently, VDEV connected links bitmap is not being updated properly
for link VDEVs. Because of this, during the disconnect assoc peer
is being deleted first instead of link VDEV peer.
To address this, update VDEV connected links bitmap after STA link
connection complete.
Change-Id: Id8465948fbb3af2f063e04ec9403cb4e3a6f98d8
CRs-Fixed: 3125636
Currently the TWT rx frames are dropped in
tgt_mgmt_txrx_rx_frame_handler considering them as unspecified
packets as action category for TWT is not defined.
Define TWT action category so that the TWT frames will not be
considered as unspecified frames and dropped while processing.
Change-Id: I2d9c01e89029bcbb379a5a9c77a7d101de155d6a
CRs-Fixed: 3087275
Add new reg API to check if frequency is active (non-passive)
or not from the secondary channel list.
The API checks the channel state against CHANNEL_STATE_ENABLE.
Change-Id: If41850563e680659ea815f09207ec0b854a2f040
CRs-Fixed: 3136785
Currently in wma_chan_info_event_handler chan info
is updated based on gEnableSNRMonitoring. By default
gEnableSNRMonitoring is set to false, due to which
chan info is not updated.
Fix is to keep gEnableSNRMonitoring enbaled, so that
chan info can be updated.
Change-Id: I77a999d64fca093c8bc50e4532e659f37a3ac593
CRs-Fixed: 3109317
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
Fix partner link updation in scan entry when AP MLD has more than one
partner link.
Change-Id: I981f16c9de819390d6830ffe7a5b1e438a4f8403
CRs-Fixed: 3125861
Add support for subelement defragmentation in the common handler for
generating link specific (re)association request/response, as well as
in the helper for parsing partner info from the Link Info field of the
Basic variant Multi-Link element.
CRs-Fixed: 3117210
Change-Id: I3727c9008043ac4132a8675bf15e73949fde63cd
Move to qdf_debug API to avoid excessive logging.
As these logs can come in interrupt context, it can cause
latencies to other threads.
Change-Id: Ibcada15235a74e9534588ae08d21bf97f4d61393
CRs-Fixed: 3120558
Include relevant header for MAX_SESSIONS and use
the correct build flag to retrieve session params.
CRs-Fixed: 3136148
Change-Id: I28ef98a67cbe479c5d8be93c49f9ae6ce63ba982
Add support for Multi-Link element defragmentation in the common
handler for generating link specific (re)association request/response,
as well as in the API for getting per-STA partner link information.
CRs-Fixed: 3116412
Change-Id: I237c593b44ec3a7c3347ccb95633cec362ba5411
When host sends TWT disable command to firmware, send reason code
also as part of it. So that firmware will check and take the
following action:
a. If host sends disable due SCC/MCC concurrency then firmware
will teardown the existing TWT session and send the teardown
reason code as concurrency to host.
b. If it's for other reason then it will take action based on
that.
Change-Id: I5b4584a964f142d17aef5629adeb12e686fd983c
CRs-Fixed: 3098862
Currently, total_weight is not initialized before calculating
default ML BSS weightage with INI configuration. This may result in
unexpected behavior.
To resolve this, calculate ML bss weight after calculating non-ML
BSS score weight.
Change-Id: I4b9455e0ce69dec5c837f92acad60ac83cdd2502
CRs-Fixed: 3127454
Export objmgr APIs to be used by SON module to register
and unregister create/destroy handler.
Also add lmac_if API to register lmac_if ops from SON
module.
Change-Id: Id4c19807792b9f7b46387ae907f853151e4e28c6
CRs-Fixed: 3118986
Currently, the code does not handle an MLO connect when in
non-init state. Add logic to clean up any existing connection
before going ahead with the latest request.
Change-Id: Ia5a10bcc1e0d2c8e82d6ea0d82d1a5bf0604a1e5
CRs-fixed: 3116687
While notifying the ML connection status to the supplicant, partner vdev
information will be filled in the connect response. This partner vdev info
is populated using partner link IDs. This may cause issues since it is
not guaranteed that link id information in the partner vdev is valid while
notifying the connection status to the supplicant.
To address this, get partner vdev information using vdev ID instead of
link ID.
Change-Id: I5e45b038b1fe5b6ab9c6bbb514eefb0ad4c39e66
CRs-Fixed: 3117702
Operating class field used in RNR IE is of global operating
class. When getting frequency from RNR IE region specific
operating class is used for lookup instead of global.
Added changes to search operating class from global OC
table.
Change-Id: I200ab46187fed91cc66cd954b062c8d8ac44f631
CRs-Fixed: 3131600
Add APIs to defragment a sequence of 802.11 element/subelement
fragments. Add an inline mode to carry out the defragmentation within
the source buffer in order to reduce buffer requirements and to
eliminate memory copies/moves for the lead element/sublement.
Conversely, add a non-inline mode to copy the defragmented payload to
a separate buffer.
Add common helper functionality shared between these APIs.
CRs-Fixed: 3124132
Change-Id: Ia68584e918ddcf626b748f2b0c3a5da6492b40b6
In some MLO functions, there are NULL pointer checks, but the logic
continues even if it is NULL. Return from the function in this case so
there is no potential NULL pointer dereference. This also addresses
a static analysis issue.
Change-Id: I22c4a47d724d8576a2ce78059dec219cbc3de91e
CRs-fixed: 3127461
