The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
There is a possible race condition that target_start can be
called during load unload leading to htt_srng_setup being
called before monitor srngs are initialized. This check will
prevent the srng_setup_call from soc_start. The rings will
subsequently be initialized when monitor modle is loaded.
Change-Id: Ie697b45425e38e6d709b7466bb495a20bef4f820
CRs-Fixed: 3125255
1. Drop the received undecoded frame if error code
abort reason not matched with configured error mask.
2. Reset phy error mask during undecoded capture mode reset.
Change-Id: I162ac1b60ceb5a4b5a87ff2d2186f2e67815f580
CRs-Fixed: 3134562
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
During undecoded mode capture reset expected to reset
only phy error filter flags. But disabled monitor mode
capture filters as well. This resulted a backpressure
in monitor mode destination ring.
Added an appropriate check to disable only phy error
filter without disturbing monitor mode filter setting.
Change-Id: If3ef8e9f41f32dff30773aeb939256920c515800
CRs-Fixed: 3137636
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Currently the monitor buffers allocation is attempted
for 2 RXDMA monitor status/destination rings.
For certain targets, eg KIWI, there is only one RXDMA
monitor status/destination ring, and the monitor buffer
allocation for the second ring fails. This return status
is not handled properly.
Fix the monitor buffer allocation to use the number of
rxdma rings from cfg context and handle the return status
properly.
Change-Id: I86718dbd790d96d794963b17a4c9bdf32792d854
CRs-Fixed: 3128299
MO stands for Monitor Other which is a filter setting specified by
host to hardware to receive TLVs for non-associated clients.
In case of enhanced stats and smart monitor, non-associated clients
are not considered and therefore disable filter settings for MO for
these features.
Change-Id: Ic533072ff668c7ab54188101a889882c4ee4ba4a
CRs-Fixed: 3123784
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Check physical address of nbuf with ring addr. If they
don't match, move to the next descriptor. Activated with
build flag.
Change-Id: Ibd6b38679d677a59f14450db3224104396c88d2e
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
- make monitor ops per soc, so that when ops are
reset it will not impact other soc.
- reset filter setting during pdev deinit.
Change-Id: Ic40582fc1d03343d0bfaf879177212ecb83ae058
CRs-Fixed: 3086841
In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
In WCN7850, there is only one common RXDMA dst ring for
both the mac.
Add changes to process the common RXDMA dst ring for
status TLVs corresponding to either MAC monitor status
ring. Also use arch ops to get rx_desc from sw_cookie.
Change-Id: Ia2c004755bc4389b587d995286093a519b995cab
CRs-Fixed: 3084442
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
This change will enable packet logging for the fragments
from RX monitor status ring and send it to the pktlog module
for post processing through WDI event.
Change-Id: I283a20e7d0fa1f9b88223a989beda529beff6718
CRs-Fixed: 3074184
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
In ifconfig athX stats, tx packets and bytes were getting double
incremented in NSS offload disabled case. It was due to tx.comp_pkt
stats getting updated both in per packet Tx completion path and in
Tx per ppdu indication from HTT path.
Fix by updating stats only in the Tx. completion path.
Change-Id: Id75d914874480a4e24ccb13223818b67869eb378
- Add support htt msg for HTT_H2T_MSG_TYPE_TX_RING_SELECTION_CFG
msg configuration
- Add support for configurable length dma
per packet type for rx monitor.
- Add support for wordmask subscription for rx monitor.
- Add support for per packet msdu/mpdu logging config.
- Add support for tx monitor tlv subscription.
- Dummy APIs for 2.0 filter configuration
Change-Id: I36b18c03eff452537c2f051b24275b81ab98ebae
CRs-Fixed: 2991330
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
- dp/wifi.3.0/monitor/ => directory for monitor specific code
- dp_rx_mon.c: status TLV procesing + packet buffer processing
- dp_rx_mon.h: Rx monitor header file common for Li and Be
- dp_mon_filter.c: Monitor filter configuration
- dp_mon_filter.h: Monitor filter header file common for Li and BE
- 1.0/ => directory for Lithium specific handling
- dp_rx_mon_1.0.h: Rx Monitor specific header file
- dp_rx_mon_dest_1.0.c: Packet buffer processing
- dp_rx_mon_status_1.0.c: status TLV processing
- dp_mon_filter_1.0.c: Rx Filter configuration
- dp_mon_filter_1.0.h: Rx Filter configuration header
- dp_mon_1_0.h - Li specific monitor ops
- dp_mon_1_0.c - Li monitor ops handling
- 2.0/ => directory for BE specific handling
- dp_rx_mon_2.0.h: Rx Monitor specific header file
- dp_rx_mon_2.0.c: Packet buffer processing
- dp_rx_mon_status_2.0.c: status TLV processing
- dp_tx_mon_2.0.h: Tx Monitor specific header file
- dp_tx_mon_2.0.c: Packet buffer processing
- dp_tx_mon_status_2.0.c: status TLV processing
- dp_mon_filter_2.0.c: Rx and Tx Filter configuration
- dp_mon_filter_2.0.h: Filter configuration specific header
- dp_mon_2.0.h: BE specific monitor ops and defs header file
- dp_mon_2.0.c: BE specific monitor ops handling
Change-Id: I74b5408460b5f2f4b31f73947b55d97dfe3b971e
CRs-Fixed: 2991215
