MLO HW link ids need not be continuous. Handle
discontinuous link id values at host.
CRs-Fixed: 3111570
Change-Id: I561cdabed8a6b621dba87c49832f5c1d1b194b9a
Validate the MLO HW link related info obtained from the global shared
memory arena of management Rx reorder feature.
CRs-Fixed: 3111549
Change-Id: I6fd7812dc49bfa8428b2ffbf66ae978592734bc0
Add the following APIs related MLO links in MLO manager.
1. Get number of active MLO links
2. Get valid MLO link bitmap
CRs-Fixed: 3154979
Change-Id: I49c544a5c73a9ce72305bbe83230a4566d909095
The API reg_get_ch_state_based_on_nol_flag() is a common API and in its
definition it calls the API
wlan_reg_get_5g_bonded_channel_state_for_pwrmode() which is defined for
the 6G specific macro CONFIG_REG_6G_PWRMODE. For non-6G callers, this
function is not defined and will lead to implicit declaration compilation
error.
Add a non-6G version of the API
wlan_reg_get_5g_bonded_channel_state_for_pwrmode() so that, it can be
called in reg_get_ch_state_based_on_nol_flag() even for non-6G PFs.
Change-Id: I810af65c7580f9a5dbfb2df25530dd95261e2a80
CRs-Fixed: 3161629
The API reg_get_ch_state_based_on_nol_flag() calls the function
wlan_reg_get_5g_bonded_channel_state_for_pwrmode() which is part of the
header wlan_reg_services_api.h. This header is conditionally included
using the macro CONFIG_AFC_SUPPORT which is not enabled for all the PFs.
Remove the condition header file inclusion as
reg_get_ch_state_based_on_nol_flag() is a common API for all PFs.
Change-Id: I3f6cc301474648fdd6a2937421ee0421a0788856
CRs-Fixed: 3161629
Currently, Userspace can send multiple AKMs in connect req.
For 6GHz, some AKMs are not supported. Suppose in multiple
AKMs, any AKM doesn't support 6GHz then driver returns failure.
Due to this, DUT doesn't not able to connect to 6Ghz.
Fix is, allow 6Ghz if any 6Ghz AKM is supported.
Also adds necessary prints in scan filter API to help
debug the candidate rejection.
Change-Id: Id9967af5ec7f64e95b33dd8be3bd6c9649e72bb2
CRs-Fixed: 3158489
Add support for MLO target recovery. Add MLO target recovery
types, add API to cleanup the asserted SOC's MLO setup info
during recovery.
CRs-Fixed: 3153534
Change-Id: Ibcfab35460de0c7b458377e24e63ab63cbe39e3c
Rename is_treat_nol_as_disabled and is_treat_nol_as_dis to
treat_nol_chan_as_disabled in the regulatory component.
Change-Id: I3f372ee1707b40e2bdcd5ca53b77e6b8f76c456b
CRs-Fixed: 3157756
Peer MAC address is not specified when get_peer_by_mac fails.
We should print the peer MAC address with debug message.
Change-Id: I5f559e6ba7373e8fef851f8035008cfaba8a3574
CRs-Fixed: 3155419
When SAP off and psoc idle shutdown happens before NOL timeout,
DFS pdev obj is destroyed, NOL timer is cleared, since regulatory
pdev private obj is destroyed before DFS, psoc master channel list
nol flag isn't cleared for regulatory pdev private obj is NULL.
When pdev current channel list is populated from psoc master channel
list, nol channel becomes disabled, can't be used any more.
To fix it, when DFS private pdev obj is destroyed, don't access
regulatory pdev private if destroyed, but still clear psoc
mas_chan_list nol flag.
Change-Id: I79dad84631179d78d05c2738ce0aa4f863def7d4
CRs-Fixed: 3158675
1) Currently, the channel state and chan flags of the super channel list
are not initialized. To fix this issue, initialize the channel state
and chan flags of the super channel list entries to
CHANNEL_STATE_DISABLE and REGULATORY_CHAN_DISABLED respectively.
2) The best power mode calculated in reg_fill_best_pwr_mode is incorrect.
To fix this issue, pass the reference of max_eirp_pwr to
reg_update_sup_ch_entry_for_mode to avoid the reset of max_eirp_pwr.
Change-Id: I624333f8fb89682771bd48e3f203509f7dadb41f
CRs-Fixed: 3145006
Include a UTC timestamp when constructing the CFR header,
represented as a 64-bit nanoseconds value.
This will allow for better correlation with ground truth
data.
CRs-Fixed: 3156826
Change-Id: Ie77d5e433346f21c3876930a2b8cbfa528affb20
For a 6G frequency, if it is not part of the current power mode's
master channel list, then it is not possible to convert the frequency
to a channel number and is return as 0.
The input frequency might be part of some other power mode's master
channel list. So consider all the power mode to calculate channel
number from frequency.
Change-Id: I5810744504b5b11d728cc2abacc02e64a4accfcd
CRs-Fixed: 3142048
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Move the global shmem common APIs (init & deinit) from REO
component to MLO component.
CRs-Fixed: 3122203
Change-Id: Ib52490c0e9662d6297a52af365e1d87b60e0739d
Get the channel list for 6G band for a given power mode. When the power
mode is REG_BEST_PWR_MODE the 6G channels will contain all the channels
supported by the reg domain irrespective of the power mode.
Change-Id: Ia1a3757685d477a2a2565eb89422fc039ca3b5dd
CRs-Fixed: 3141999
These macros define the min & max time from TBTT, when the scan
dwell time starts. They can be used as a parameter to the scan
WMI command.
CRs-Fixed: 3154082
Change-Id: Ieca8acfd2e6897a8e45fafaaffd8f283f451d203
In case of MLO, when connect is in progress and disconnect is received,
there may be a possibilty that the assoc link's bss peer is deleted
before non-assoc link's connect is still in progress which can lead to
issue in peer setup at DP and FW.
Add fix to handle mlo disconnect while connection is in progress
Change-Id: I550abff439deca19c7ab355cae1fa46db1f0f61b
CRs-Fixed: 3152770
Add support to clear mld soc setup and link down
such that in case of teardown fails counters are updated
properly.
Change-Id: I5dc8c581069ef1d5bd0614568b435c0a9448fdcc
CRs-Fixed: 3127308
If Vendor IE also presents in STA profile, it only needs
to copy the vendor IE from STA profile for link specific
frame and reported BSSID.
Change-Id: I48ed4e88f097fe6570b3f3df764cd707c4b758d3
CRs-Fixed: 3136382
Fix build issue on kernel5.10.
error: implicit conversion from enumeration type 'enum reg_6g_ap_type'
to different enumeration type 'enum supported_6g_pwr_types'
[-Werror,-Wenum-conversion].
Change-Id: Ib15ed20036f2472b567acee2e4d24d3e6bfe1956
CRs-Fixed: 3154541
When SAP off and psoc idle shutdown happens before NOL timeout,
DFS pdev obj is destroyed, NOL timer is cleared, NOL channel
is failed to clear for regulatory pdev obj is freed already.
To fix it, let NOL timer and NOL be cleared in dispatcher_pdev_close,
before pdev destroy and regulatory pdev obj destroyed.
Change-Id: I5818f8a0284a6c45e8a435ac59269df73507deeb
CRs-Fixed: 3151099
By default, the regulatory module considers NOL channels as disabled
and these channels are excluded in channel search algorithm.
However, there are use cases where a search for NOL channel
is done and regulatory module fails to fetch the channel param.
Hence create an infrastructure to consider NOL channels
as "enabled" / "disabled" as per user's choice during channel search.
Setting "is_treat_nol_chan_as_disabled" flag to true considers
NOL channels as disabled and punctured.
The callers of reg_fill_channel_list() and
reg_set_channel_params_for_freq() APIs should set the flag
"is_treat_nol_chan_as_disabled" as per the desired use case.
CRs-Fixed: 3134870
Change-Id: Iae7cea18ecfd5e9972ea8e6934828898a6cd1e74
Move the following APIS from component dev to cmndev.
1. reg_get_nol_channel_state
2. reg_get_5g_chan_state
3. reg_get_5g_bonded_chan_state
The purpose of these APIS is to consider NOL channels' state
as "enabled". This is used in reg_set_5g_channel_params_for_freq() and
reg_fill_channel_list() API to get the channel state based on
user flag "is_treat_nol_chan_as_disabled".
Change-Id: I174e365e7e5ece8ac5fb082dd92eb76be3126cc6
CRs-Fixed: 3149470
No TWT session params can be a debug log since it is not fatal
and need not be printed to console. In multi-client tests,
this can cause too many prints since upper layer polls for the
stats periodically.
Change-Id: I7a4cac9202ac15c430910864d0f863e1193ea569
CRs-Fixed: 3150799
If a Radio supports 6G band channels, the ACS is expected to give
priority to a set of channels that are above a certain (threshold)
frequency.
Store the extracted threshold frequency from WMI into regulatory
component.
Add a new API reg_get_thresh_priority_freq to get the threshold
frequency received from the target.
CRs-Fixed: 3143318
Change-Id: I8676ce56e68b5a4eb4e4b64415dc293e086472f0
Currently definition of wlan_reg_get_power_string is
present for 6G only which may cause compilation issue
when 6G is disabled.
Fix is to add definition of wlan_reg_get_power_string
for both 6g enable and disable case to avoid any compilation
issue.
Change-Id: Iaad8f16543306e6ac09e76546062fae554124c1e
CRs-Fixed: 3150997
Print ref_id in all debug prints. It will make sure even if
string value is not added in string_from_dbg, there will be ref
id to debug leak issue.
Change-Id: If35a298239dd09cb4169474da34e30e85a2cde92
CRs-Fixed: 3147857
CLEAR_PARAM failed to clear bit at bit position of "val". This change
correct to ((__param) &= (~(1 << (__val)))).
Change-Id: I20a9203592c0f48c3d2999985edd8ff81f55eb9d
CRs-Fixed: 3137825
Enable the wmi_service to fetch the radar found cfreq from
wmi_service_radar_found_chan_freq_eq_center_freq.
Add changes in DFS random channel selection algorithm
(1) To find a channel of input width 320MHZ. Since 320MHZ in 5G
is 240MHZ (320 - 80 punctured), there are 12 valid 20MHZ subchannels
possible in 240MHZ. Validate the continuity of 240MHZ channel before
declaring the channel to be found.
(2) To find a fallback channel for the input channel
width of CH_WIDTH_320MHZ. The fallback channel of 320MHHZ is
160MHZ.
CRs-Fixed: 3149475
Change-Id: I03cac7f090de20efd912402b5e4df543b47aafed
Add support to update key management with higher security
after BSS create response.
Also, Currenlty if there are multiple AKM and ucast cipher.
Host overwrites AKM and ucast cipher value with the new one.
Instead of overwrite, add support to do ORing to keep all values.
Change-Id: I679a86debef649efbce1a08b60512d127f7fbbee
CRs-Fixed: 3113222
Rename files with blacklist/whitelist to denylist/
whitelist. Rename files with blm to dlm.
Change-Id: I6f533c30c664aaaf713cdd2e2e34f9528df139b5
CRs-Fixed: 3099867
