Need to increase debug timeout incase more debug logs were
enabled. This is to avoid sync cmd timeout.
module_param_cb supports to register custom set/get callbacks.
So using this feature to increase various timeout values,
incase more logs were enabled.
Change-Id: I194c077c2ba00af2403d487a3dcfbb48f119b478
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Avoid adjusting, sanitizing, and setting mark and use ltr
controls to fw for input port static case.
Change-Id: I8ac7fd9537ff0c5ddce0ff0f4d0337cb19dd83d2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
For max-qp, set_min_qp is called,
correct the same.
Change-Id: I2ff7d6557a033fa45343b131fd68cae1eaf6d796
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
- Account for V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
ctrl value to decide HFI_PROP_DECODE_ORDER_OUTPUT property value.
- Set encoder run time properties on raw port
- Some logging changes.
Change-Id: I5eef81b484e81b69031854a3a8665de4be7f98f9
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to deliver HFI_PROP_BUFFER_TAG via FTB metadata buffer
to receive HFI_PROP_DPB_TAG_LIST from fw via FBD metadata buffer.
Change-Id: Id9eeee26135379975f55923505d9c91905fa0b9e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Allow HB layer encoding type
- fix dynamic setting of I Frame QP and Peak Bitrate.
This reverts commit 4ef2b8899d.
Change-Id: I4d63dd424c68d388709684c649ef492ce2489caa
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Remove usage of private ctrls and use upstream ctrls.
Change-Id: I137855872030822f0d6b2cd59babca3f0cc591d4
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Enable encoder input Compression Ratio (CR) stats.
Input CR stats are provided by clients for each input buffer
and used in bandwidth calculations.
Change-Id: Ibd910118837148b0b9dcc288069237f9a2d8f225
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
add RGBA and RGBA_UBWC color format support
for encoder.
Change-Id: I3e179ae9769d851afc5a6f11e1afb14d96e92073
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Allow only HP layer encoding type until fw fatal error
is resolved
Change-Id: Id35e78bbb5feaab0c9d4ad94c94d5b7e47733b69
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Set dynamic flag for CODEC_CONFIG cap to allow dynamic setting.
Change-Id: Ie49b60508b0633b34b38e4c17b8e214e7e4159a5
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- add DPB tag list capability in database
- subscribe in metadata mode for the dpb tag list
property if enabled
Change-Id: Id4b9b7392b7b26cccf0860d578b8a0cb8d798d04
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to set HFI_PROP_NAL_LENGTH_FIELD property to
video firmware.
Change-Id: I20db36bad394fe0b5163a156199340836af3f740
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to set default fps to video fw.
Change-Id: I5074b5379c8bca273e098a3375f2c949b0656ae8
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
As per HFI_PROP_CODED_FRAMES details, 0x0 is field interlace,
0x1 is progressive and 0x2 is adaptive frame field bitstream.
Treat 0x1 as progressive and both 0x0 and 0x2 as interlace in
driver.
Change-Id: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Added smmu_fault_handler support and printing all buffers,
allocations, mappings list details as part of smmu fault
handling.
Change-Id: Idb5d28357f9fb885adf7ae16f328b4963c56aa8c
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- introduce STRIDE_BYTES and STRIDE_PIX to
calculate size is bytes and pxls respectively.
- DEPRECATE VENUS_BUFFER_SIZE and introduce
VIDEO_RAW_BUFFER_SIZE. All buffer sizes are
calculated by using STRIDE_BYTES.
- For s_fmt, use STRIDE_PIX to calculate size.
- For v4l2 bytesperline, use STRIDE_IN_BYTES to
calculates size in bytes
Change-Id: I3db4d843d1834b25c6160ebc318572ac67e22806
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- Set enc colorspace info to firmware via
HFI_PROP_SIGNAL_COLOR_INFO property.
- Fix dec colorspace payload packaging.
Change-Id: Ib7ef2395a4f98f6497bbb200770a8612410eb8f5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Set dynamic flag in inst database to allow
dynamic setting of necessary controls.
- avoid enc qbuf call routed to dec.
Change-Id: I66cfcc6be86bfbfe237191a11d533ab6c9455f32
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
For decoder FW should not assume any default sequence header.
Decodering should start only after FW receives first sequence
header. Also, decoding starts only after discovery of random
access point frame. RAP frame means IDR for AVC, IDR/CRA/BLA
for HEVC, I frame for VP9 and MPEG2.
Change-Id: Ie12b8140f6b63e57c52a9c96cb1250f4958a42c6
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
fixes for nv12 format and dpb buffers. modified
PIX_FMTS and corresponding driver color format
structure, therby fixing enum_fmts.
Change-Id: I955b76dd4938e96fe259311e107a0cdca39425bc
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
If required, Firmware can be unloaded after every session.
Power collapse is enabled by default.
Change-Id: Ie014a26ae600816d8713cd34826f1f9a77088e4a
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add support to deduce min, max, frame qp values from client set
controls and set the same to video firmware.
Change-Id: Id94e781cc0c8afdf0e9e00562bdaea32db04fd74
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Iris2 specific calculations for Work Mode and Route.
Also add quality mode support.
Change-Id: I7a1e2fa27236aa749978d146d85fd0af6177084c
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
