Guards debugfs features in camera driver to only be compiled when
CONFIG_DEBUG_FS is enabled.
CRs-Fixed: 2717236
Change-Id: I0de77741301d259cbec64e8a2e27830981b2b69d
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Fixes exit call flow as a part of rmmod.
CRs-Fixed: 2675526
Change-Id: I47111a737cb06d9bb3d0a417a471c5c9fb545999
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Changes extraneous CAM_INFO logs into CAM_DBG logs in order to help
de-clutter serial boot logs.
CRs-Fixed: 2669269
Change-Id: I7589bd64363aa122c46e1193c68bbf49d78a4a9a
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
When user space detects an error or does not receive
response for a request, Lets do a reset(LDAR) is triggered.
Before LDAR, user space sends flush command to the
kernel space.
In order to debug the cause for this situation and to dump
the information, user space sends a dump command to
kernel space before sending flush.
As a part of this command, it passes the culprit request id
and the buffer into which the information can be dumped.
Kernel space traverses across the drivers and find the culprit hw
and dumps the relevant information in the buffer.
This data is written to a file for offline processing.
This commit dumps the IFE, CSID registers, LUT tables and context
information, cmd buffers, timestamps information for
submit, apply, RUP, epoch and buffdones of the last 20
requests.
CRs-Fixed: 2612116
Change-Id: If83db59458c1e5ad778f3fa90cbc730122491c54
Signed-off-by: Gaurav Jindal <gjindal@codeaurora.org>
Different CDM hardware have different capability and registers.
With old register space, handling new features and operations
would have been a complex task. This change takes care of old
version of CDM and also changes the regspace to provide every
register's access to CDM.
This change further adds support for "arbitration" in case of
multi-context CDMs.
Exports reset functionality to clients, detection of CDM hang.
Flushing the CDM requests and dumping the FIFO content for all
contexts.
It also adds submitting "debug_gen_irq" as BL_done IRQ is only
an indication for availability of FIFO's. The AHB operations
are completed can only be known if the added "debug_gen_irqs"
gets executed and are received by the CDM.
CRs-Fixed: 2594541
Change-Id: I9846b1c5320ba652c5d3b7d83d616d2dabc843e1
Signed-off-by: Abhilash Kumar <krabhi@codeaurora.org>
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Removed unused functions that called clk_set_flag, which has been
deprecated in linux kernel 5.x.
CRs-Fixed: 2554484
Change-Id: I0062383b0b059e6b359229f4b33470713289abb4
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
The command buffer obtained from user has several offsets and
sizes that need to be validated before accessing data. Also,
out buffer offsets need to be checked before writing data.
Add validation checks for parameters in command buffer for
reg dump.
CRs-Fixed: 2501003
Change-Id: I65b37befcefbd7f739663b6142d5d0eedcab25b4
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Certain register values are required by user space during flush
to apply settings accordingly. Also, support for dumping registers
at the time of error is needed for debugging. Add support for
dumping register values in a range of offsets to given cmd buffer.
Change-Id: I5912118809f7a7dd701a555639d1057ffe665ce1
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
This change updates the scalable clock based on
hw src clock. Also, removed cam_soc_util_get_vote_level()
as it is duplicating the functionality with
cam_soc_util_get_clk_level() api.
Change-Id: I001264d150849770ef664ecc206a66f8a4f54412
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Bring over camera driver changes as of msm-4.19
commit 5a5551a7 (Merge "msm: camera: reqmgr: Fix CRM
shift one req issue").
Change-Id: Ic0c2b2d74d1b3470c1c51d98228e312fb13c501a
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
