Variable "type_specific_data" is defined under macro
PKTLOG_HAS_SPECIFIC_DATA in struct ath_pktlog_hdr, but
used without control of the macro.
Change-Id: I9d46ddc141a0641aa6eaecf712c52e640c48053c
CRs-Fixed: 2665564
In kernel logs, qtimer currently logs the time-stamps in decimal. Change
time-stamp from decimal to hex in order to order to help correlate
better with other logs in hex qtimer time-stamp.
Change-Id: I46964609645305b1847406841e1b1b641aae9074
CRs-Fixed: 2666868
The gwlan_logging struct is used by offline tools, so it needs to be
made non-static. Remove the static keyword from gwlan_logging.
Change-Id: I05f47328914c40a2c957ca404b6681ba8507d367
CRs-Fixed: 2663164
Currently, the code present to take care of the PTT msgs in case of
non-CNSS_GENL is not being used. Thus, cleanup the path for the same.
Change-Id: I310ace0e04448b21e46b0f39efb3c33bce0a4d65
CRs-Fixed: 2559499
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CAPS and respond with
NLA type CAP response
CRs-Fixed: 2595140
Change-Id: I5a6aa1fac537ca618404520b81c541a20dafd6fb
Fix array index overrun by changing index size
WLAN_MAX_ROAM_CANDIDATE_AP from 8 to 9 in a roam
scan API
Also, replace local macro WLAN_MAC_ADDR_SIZE with
global macro QDF_MAC_ADDR_SIZE to avoid issues in
future
Change-Id: Ib546d18e1d85e87064eb5b78c08168db583acf2d
CRs-Fixed: 2621600
Currently, wlan driver prints id in hex mode and
fw prints in decimal mode. Unnecessary hex to dec conversion
conversion is required while comparing with fw logs.
Fix is to change driver timestamp log from hex to decimal.
Change-Id: I78f9b7fe0ba590c53ea3e90b982691d91b7453e4
CRs-Fixed: 2620935
Various QDF logs being printed to the driver log are not necessary for
debugging purposes.
Cleanup the logs that are not required.
Change-Id: I9c5685b4d31a741703667943ac458921fa0d480e
CRs-Fixed: 2616210
Add the changes in utils and wlan configuration
layer for supporting the newly added IPCI bus type
for Moselle.
CRs-Fixed: 2597342
Change-Id: I4484d6e774e9f94a322b8dee4ae7ff4460ed2634
Update the diag log codes for below excluding the LOG_1X_BASE_C
offset, as its added explicitly:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO_C
LOG_WLAN_ROAM_TRIGGER_INFO_C
LOG_WLAN_ROAM_SCAN_INFO_C
LOG_WLAN_ROAM_RESULT_INFO_C
LOG_WLAN_RRM_TX_RX_INFO_C
Change-Id: I7f4918542760b518a9ea5ffa90ca554a5c9c5c8a
CRs-Fixed: 2599120
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Move process_sw_event API to pktlog_wifi2.c file as
it is only applicable to legacy product line.
Change-Id: I8eee102ea2eb70c0ffcec4ac20dfdf6ef48bca5b
CRs-Fixed: 2585613
Move pktlog_rate_find API to pktlog_wifi2.c as they are
only needed for legacy product lines.
Change-Id: I2a232e283cf5bf151ce84ba77f4359f25b60a5ac
CRs-Fixed: 2585613
Move process_rx_info to pktlog_wifi2.c file as it
is only applicable to legacy products.
Change-Id: I2a758c26ac560459f22fbb691863bf1fea17cf65
CRs-Fixed: 2585613
Move process_tx_info from pktlog_internal.c to pktlog_wifi2.c
as they are only needed for legacy product line.
Change-Id: I53b90deaf86aa2bb6533b9957879e7860d91b352
CRs-Fixed: 2585613
Move pktlog hardware dependent API's from pktlog_internal.c
to pktlog_wifi3.c as they are hardware dependent.
Change-Id: I421b3116a35e735a51c82839005bbc2d4cb138d7
CRs-Fixed: 2585613
Add the diag log structure for protocol data packet
info to be sent as diag log to user-space.
Change-Id: I604a8e4d4355c39e66cd1b6b877aecb7f658b316
CRs-Fixed: 2595797
Add data structures to support diag log payloads. Define
new diag logs with the log id defined at the global diag
logs definition.
Below new diag logs are introduced:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO_C
LOG_WLAN_ROAM_TRIGGER_INFO_C
LOG_WLAN_ROAM_SCAN_INFO_C
LOG_WLAN_ROAM_RESULT_INFO_C
LOG_WLAN_RRM_TX_RX_INFO_C
Change-Id: I08b8ce156b405e555bc9c981b46ee8924bc76364
CRs-Fixed: 2595648
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2584839
Protect pktlog funcitonality under given mutex to avoid possible
race condition between pktlog_release/pktlog_open and pktlogmod_exit.
Also call pktlogmod_exit before calling wdi_event_detach to avoid
accessing freed memory in pktlog release.
Change-Id: I5ca4b304d0f4dc1af289daa167958d5b773d9a6e
CRs-Fixed: 2578623
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
Diag event processing is stuck due to skb allocation failure.
SKb allocation is done using flag GFP_KERNEL which results
in the kworker thread to sleep and results in wmi workqueue
timer to expire.
Fix is to use GFP_ATOMIC flag for skb allocation for
diag data.
Change-Id: Ifa715df89ae06b17d4dc1506ea4f3c4e2af31f33
CRs-Fixed: 2559679
Currently MCL and WIN both have there separate queue.h
files with the same declarations and definitions.
As part of cleanup create single queue.h in common
code and update the usage of existing queue.h to this
newly added queue.h.
Change-Id: Ie381c3553d6361cf7f8c97f14a91ed24e332b51a
CRs-fixed: 2505617
Replace printk with qdf_nofl_info in qdf folder.
So if we wish to change from printing on console
to other location, based on a logging daemon, we
can do that by only changing at the implementation
of QDF print API's
Change-Id: I6db67cee416ebbe0f2c51b2d4dbf2b3a335e972a
CRs-Fixed: 2442689
Use macro PKTLOG_TYPE_RX_STATBUF for indicating
received Rx Full pktlog messages.
Change-Id: Ia7e69bc385fd7b1367c191f657ace8327388cf03
CRs-Fixed: 2529520
The __log_window_end_ticks variable is implicitly initialized as
zero, which may lead to the disfunction of qdf_system_time_after
when assert_on_excessive_logging is first called with big number
jiffies. Then __log_window_count number increase until hit the
threshold, and trigger the panic.
Now initialize __log_window_end_ticks variable explicitly when
__log_window_count is initial zero in the first call of
assert_on_excessive_logging.
Change-Id: Ic5256af9235bf195b4ae5ee79bfce9ea213ea29b
CRs-Fixed: 2525529
This is a propagation of qcacld-2.0 commit 98821c7dcf49d ("qcacld-2.0:
Add CONFIG_MULTI_IF_LOG to support multi if log"). Add CONFIG_MULTI_IF_LOG
to support multi if log by assigning the specific netlink protocol
when dual wlan cards are loaded.
Change-Id: I827fbd46893c47ed2d9b123bf753c06b2e115fbb
CRs-Fixed: 2525488
The pktlog will fail with ROME module due to the change IDs:
I24776caa3b78ec38d94421f243ec72d81ee3102d
Ifb70ac0993f2402201f88758845f730cf677b1a0
Define new macro PKTLOG_LEGACY for HELIUM/ROME to avoid the ROME PKTLOG
failure.
Change-Id: Ibaa20b7af208a261e0fd8682de45ad8eb4a69212
CRs-Fixed: 2523511
The member of type_specific_data is not valid for ROME module. Add macro
protection for type_specific_data in the ath_pktlog_hdr to avoid offset
error when getting the msdu id info during processing pktlog TX info.
Change-Id: Icb8b95cef9a32732116522e4fc3b39067ff36037
CRs-Fixed: 2518400
Avoid further processing of pktlog buffers received from
firmware or Hardware if the size is greater than
MAX_PKTLOG_RECV_BUF_SIZE.
Change-Id: If1dd855137a9b83721f01005fa3367f7924f4ebb
CRs-Fixed: 2493721
When wlan logging is turned on in developer options
wlan logging verbosity level is set to active and
pktlog buffer will also be passed to
wlan_pkt_stats_to_logger_thread. In this API we call
skb_put multiple times to copy ath_pktlog_hdr(16 bytes)
and pktlog buffer (2048 bytes) = 2064bytes which is leading to
skb_over_panic as the skb length is set to 2048 bytes.
Increase the skb size to 2112 bytes which can accommodate
2048 bytes (pktlog buffer size) + 16 bytes(ath_pktlog_hdr) +
8 bytes (pkt_dump) + 40 bytes (future use) to avoid overflow.
Change-Id: Ia8bda14f45d2eb77357bf7e46a12c1062d56d8e1
CRs-Fixed: 2489338
Add the tx_status enum in wlan_logging_sock_svc.h so that
enum can be used for MGMT TX status mapping in wma_mgmt.c
Change-Id: I5681e6fcc39704b6be18bc68b1042e0e6b53f590
CRs-Fixed: 2491787
Idle restart needs to prevent system suspend and hence, add new
reason code for idle restart.
Change-Id: I15f7be551f00bd910a61080c087a8f85dd2fe7da
CRs-Fixed: 2490992
Initialize type specific data in process_tx_info
while processing full tx pktlog messages.
Change-Id: Icbdd20e7e4604f117912e5a4402f7aa5048e671e
CRs-Fixed: 2468471
Target firmware Assert are at times related to Host Driver
interaction with the firmware. To debug these issues, host
driver dump is mandatory. The feature provides memory dump
of data structures registed with this framework. The dumps
are saved which can later be loaded using gdb and analysed.
Add apis support for the feature.
Change-Id: I41c5126a49a698969f24b17187f78f4b4db7a51e
CRs-Fixed: 2478139
This is to remove CONFIG_MCL in wlan_flush_host_logs_for_fatal.
And move condition cds_is_log_report_in_progress to qcacld code.
Change-Id: Ie231e966229789bcd8fa69aef1bc20e9b07a88ae
CRs-Fixed: 2484897
This is to remove CONFIG_MCL in qcacmn code.
This change cleans CONFIG_MCL in wlan_logging_set_fw_flush_complete.
Change-Id: Ia417c90060b20b004b1e5408be654ff392a8113d
CRs-Fixed: 2484838
Replace macro CONFIG_MCL with FEATURE_PKTLOG for
pktlog related code.
Add some macro changes to ensure the following 3
functions' declarations are enclosed by the right
macros:
wlan_deregister_txrx_packetdump
wlan_register_txrx_packetdump
wlan_pkt_stats_to_logger_thread
Change-Id: I900de3be28faee8403923a5e4bd326e69895d998
CRs-Fixed: 2406250
Currently driver is using vmalloc to allocate the memory
inside dbglog_block_read api and this buffer is copied to
userspace buffer which may lead to use of uninitialized
buffer.
To avoid above issue use vzalloc to allocated the buffer
which initializes the memory to zero.
Change-Id: Iebc530b000c908231ef8718e79054801d294dd8f
CRs-Fixed: 2470385
Adrastea compile flag is not needed for wlan log to user
time stamp add API because current day of time is expected
to be logged in driver log for all cases.
Change-Id: If04dc54ef35db6d66da9a69a1c7d502873009553
CRs-Fixed: 2444852
The packet logs show in console logs which are redundant.
Change the log level from qdf_print to qdf_debug to avoid
excessive logging.
Change-Id: I2a43a0072bb7f940df007a590013e500ddda5e8a
CRs-Fixed: 2437278
