The two api have different result for country ie empty AP case
at present:
scm_is_bss_allowed_for_country : allow ap with empty country ie
reg_get_6g_power_type_for_ctry: disallow ap with empty count ie
Add check empty country IE in scm_is_bss_allowed_for_country
to align reg_get_6g_power_type_for_ctry.
Change-Id: I8c929bf0befa691f60861ceb8c63827cde400ae9
CRs-Fixed: 3093481
Host splits MBSSID into individual scan entries. The IEs
added into the new scan entries should neither be in the
non-inheritance list nor a duplicate IE. Host checks duplicity
of Vendor specific IEs by comparing the OUI, type subtype of
the non-tx and tx BSSID IEs.
Adaptive 11r VS IEs doesn't have subtype, and host uses
IE data as subtype. In this case, even if both the IEs are
same, still both are added into the new scan entry. The
supplicant uses the capability from the first IE belonging
to the tx profile leading to connection failure.
In MBSSID parsing logic, add exception for OUI from this
specific vendor in the Vendor IE comparison logic.
Change-Id: I7bb6cc7ebe34a5f007b9b84c91d6db6c7fcf997b
CRs-Fixed: 3084721
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: I8537147104f30b74ffb2e87946f2e5f4b129f0df
CRs-Fixed: 3075460
Add LOW_SPAN_ACTIVE_DWELL_TIME and LOW_SPAN_PASSIVE_DWELL_TIME
macro support to keep all 2.4g/5g active/passive dwell time
same for low span scan mode.
Disable adaptive dwell to firmware so that firmware cannot
modify dwell time.
Change-Id: Iff05dd7b37a40226c61b28a1e59ea8aa8c57cb52
CRs-Fixed: 3076163
Currently if AP and STA have different ctry codes, STA should
operate in VLP mode. And if STA ctry code is US, then scan and
connection are not allowed as US VLP is not supported yet.
However, if RF test mode or Wi-Fi Safe Mode is enabled, allow
scan and connection on this AP and STA can operate in LPI mode.
Change-Id: I513657b8e274ef07eb9e9b5fc265722cb01525de
CRs-Fixed: 3079537
Currently, ML IE address update is missing while copying the beacon data.
This may result in illegal memory access when ML IE accessed from copyied
scan entry after original scan entry got freed.
To avoid this, update ML IE address in new scan entry while copying
scan entry.
Change-Id: I6161481cbd13573b8177f122f7d26d177cc07aaa
CRs-Fixed: 3052302
Do not limit the max length of RSN/WPA IE as they can contain multiple AKM
and CIPHER. We need to consider all the variables to limit the max length.
Change-Id: I204f86d7c773d0c104ad1f58b3648d6c5577af94
CRs-Fixed: 3051247
Fix compilation issues in MLO related code.
Add debug prints when generating link assoc response.
Add NULL value check.
Change-Id: Ie5951816ee39428c086ec91eaa6fc9cf598072b6
CRs-fixed: 3038725
Add debug log in case BSS freq is not matching the freq list
provided in scan filter.
Change-Id: I00da614f4a5b4fdf58122cf2750afe5c03114536
CRs-Fixed: 3035787
In case of split profile, while parsing the other segment
of the non transmitted profile present in the subsequent
MBSSID tag, it is possible that the beacon is corrupted where
the non tx profile length has gone out of bound.
In case of above scenario, the MBSSIE parsing code does not
free up the memory allocated for split_prof_start before
returning, which could possibly result into a memmory leak.
Handling the split_profile_continue bit before non tx profile
length check can avoid this situation.
Change-Id: Iaa491fd2803d88759e74ca5a668dddb9f8a42708
CRs-Fixed: 3023554
While parsing MBSS IE split profiles, bssid copy flag
is not reset in between sub element parsing resulting
in skipping the bssid copy for next non tx profile.
Reset skip_bssid_copy flag for each sub element parsing
so that correct bssid is copied for next non tx profile
CRs-Fixed: 3019298
Change-Id: I429190b21a3ddafdc75a73e8b063f6b6f629492a
"scan_entry->ie_list.multi_link is null" print is
flooding the scan component. Hence, remove this print.
Change-Id: I921eea8afc2dba5637c7c02717e2d1fb544ba103
CRs-Fixed: 3023813
User configuration support to use scan request BSSID value
in Probe Request frame RA during the scan.
Change-Id: I40d07e4c3e4814a9c816b3e426dcbb63df7ddf27
CRs-Fixed: 2945679
Although beacon drop info is important, but if continually print with
info level it will flood serial log and lead to low performance.
Security mode check is mandatory in 6Ghz band, so it is by default
enabled, so possible to see many beacon drop log because of this check.
Change beacon drop log to rate limit and fix one potential memory
leak in __scm_handle_bcn_probe().
Change-Id: Ic9032b99504d6ff41256d547e2d8fad101301589
CRs-Fixed: 3014786
ESS (Extended Service Set) operating mode allows wireless
device to roam anywhere within the area covered by multiple
APs.
IBSS (Independent Basic Service Set) allows wireless device
to connect in peer-to-Peer mode only.
Fix is to allow connection manager module to filter only
those AP(s) which is/are part of ESS network.
Change-Id: I9536557daa624b9e44505efa0e0720e47b645517
CRs-Fixed: 3015220
During beacon or probe response, if channel is dfs && frame type
is MGMT_SUBTYPE_BEACON, it would call "util_scan_add_hidden_ssid"
to deal with the packet. If the ie id matches with SSID then OOB
read may occur in ie_len as it is validated with upper bound of
ie_ssid.
Validate the ie length first. If it is more than 0 then copy
memory to SSID which are equivalent to ie length.
Change-Id: Ib5e2ab7f6f3337d4c3e5c240e3133d8f276be50a
CRs-Fixed: 3007473
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I67bd50652c3be7912c516b81d40f6a1ea7a7b90a
CRs-Fixed: 3007172
Add 4.9 ghz frequency check also in scan command. This change
is needed so that scan entry is formed and association happens in 4.9ghz.
Change-Id: I2fbf719ea6a5e747e07a5973a2da3d2ca2d11b7b
Currently, partner info array in scan entry is contains self link
information in first index. to avoid confusion, update partner info
with only partner links information and store self link id in ml_info
of scan entry
Change-Id: I53992fee355613b8521409da412254c05fb63fbf
CRs-fixed: 2991229
Replace util_scan_scm_chan_to_band with util_scan_scm_freq_to_band
to work for 6G channels.
Change-Id: I5f8843599cbea194a57cc7fc3b20163a7205f4e7
CRs-Fixed: 2987153
Add scan support for puncturing by extracting the puncturing
bitmap field in the EHT operation IE.
Change-Id: I221464f52bfce40b55344f995945836f80553579
CRs-Fixed: 2982502
Add API to get partner links information to proceed for ML connection
in best links selected in ML scoring.
Change-Id: Ief13bc19d8e44af601e2fe6397112d841bfcce28
CRs-Fixed: 2961883
NLO complete events were not received as
host is in runtime pm suspend state and thus
scan results were not sent to supplicant to
trigger re-connection. Add code to prevent
runtime pm suspend on receiving NLO match event
and resume Runtime PM on receiving NLO complete
event from firmware.
Change-Id: Iab91fb88fff3394ce5629be1eb6adc911a673b58
CRs-Fixed: 2954994
Fix the channel validity check for DS param IE in beacon or probe
response frames in scan.
Change-Id: I17132d3d406b2953ad31dc6ab40b0158e21bc5c4
CRs-Fixed: 2960334
Currently, host comapres HT Ie with htcap_cmn_ie
structure size but returns err in case ie len
is different from structure len which may break
the iteration and can lead to scan entry creation
failure.
Fix is not to break the loop and perform action
based on other Ie to avoid Ie parse failure which
leads to scan entry creation failure.
Change-Id: I93f0d67ae0f7ea8bb5dbeabc895b5c3d1ae43a73
CRs-Fixed: 2965729
If STA country code is US and 6G AP country IE is other than
US, STA would use VLP mode. Since US VLP is not determined
we don't allow connection to go through. Additionally, don't
include such AP to scan result.
Change-Id: I41b0c7dbea681b2ef1bea7c0a572ee1d7248fa6e
CRs-Fixed: 2953248
Scan manager currently has two flags - scan_f_2ghz and scan_f_5ghz
for the requestor to specify which channel bands to scan.
Currently, these flags are not utilized by the scan manager to
control the channels selected as part of the scan request channel
list. As a result, specifying a particular band will not
limit the scan manager to scan only the mentioned band - instead
scanning all supported channels.
Add a check to use these flags to avoid channels from bands
which are not selected.
Change-Id: I86e17184b5bb67cbf951eee5d43a8f80a93718d6
CRs-Fixed: 2934215
For security cert TC, RSNIE length can be 1 but if the beacon is
dropped, old entry will remain in scan cache and cause cert TC
failure as connection with old entry with valid RSN IE will pass.
So instead of dropping the frame, do not store the RSN pointer so
that old entry is overwritten.
Change-Id: I2fe4d2dd2352be6850f7a18a2ec829733ded7ee8
CRs-Fixed: 2944120
Add new ini's for assoc active and passive dwell time
for 6g. These will be applied if STA is connected.
Change-Id: I680fbd3038968ecf6ff9920fff982456135bfd77
CRs-Fixed: 2941359
When obss scan is enabled, FW will trigger scan periodically by
a timer. If a scan was triggered, FW need to access host memory
for data transfer. Occasionally, suspend may happen during one
scan, then FW is unable to access host memory and fw will crash.
So disable the obss scan before suspend.
Change-Id: Ie507da929a3701473cb57888e96e702e34d4c95a
CRs-Fixed: 2927239
If MBSSID ie contains only header and no payload
then current logic can cause OOB read.
Added validation check for length of IE before
accessing MBSSID IE payload.
Change-Id: Id8b34e5f516f1a1c85bc7d93d9128cad29393e9d
CRs-Fixed: 2838631
Currently when updating the single pmk capability for an AP,
the driver only changes for the sae single pmk OUI advertised
by the AP and not the ini value. This causes the crypto entry
for the AP to be updated with single pmk flag to true even when
the ini is disabled.
So check the sae single pmk ini also to update the scan entry
as sae single pmk bss.
Change-Id: I2ae16c8da5af397b041723f9d5a3b2d8a6e7c986
CRs-Fixed: 2935440
The earlier logic for scanning non-inheritance IE fails if
non transmitted bssid profile has any extension element
such as MU EDCA before the extension element with
non-inheritance IE.
Since MU EDCA is also an extension element and it does not
have noninheritance element id in it, the logic used to fail
as the driver does not check further for any other extension
element ID in non transmitted bssid profile. Because of this
the IEs part of non-inheritance list used to get inherited,
causing disconnection issue.
With current fix, the scanning for non-inheritance IE has been
taken care properly. Driver will go through the non transmitted
bssid profile until it finds the extension element with
non-inheritance element ID in it.
Change-Id: Ib4346600a880a8390c6d023cf403ed18c62406d2
CRs-Fixed: 2935065
Previously, for high accuracy scan,
configured scan policy SCAN_DBS_POLICY_FORCE_NONDBS
takes more time to scan.
For DBS HW, to improve scan time, this should be
changed to SCAN_DBS_POLICY_DEFAULT.
Change-Id: I692e2a8b4fd9c97b526197edc57b830fa091a456
CRs-Fixed: 2927022
If multiple MBSSID beacons fail during scan entry generation,
it can lead to flooding of the console.
Rate limit this print to avoid scheduler timeouts.
CRs-Fixed: 2918649
Change-Id: I71ed2dafcedc7da4be130569776870a2bbb6b28f
Currently, scan requests are optimized to trim 6g channels based
on the ini params scan_mode_6ghz and scan_mode_6ghz_duty_cycle.
But RRM scan request comes to host driver with a fixed set of
channels and the expectation is to scan all supported channels
out of these.
Don't consider scan_mode_6ghz_duty_cycle to optimize the
channels in case of RRM scan request. Thereby no 6g channels
would be trimmed.
Ini param "scan_mode_6ghz" is still honored if it's set to
"SCAN_MODE_6G_NO_CHANNEL", which filters out all 6g
channels from the scan request.
Change-Id: I960ac2c68f8d291209acc1c59d2f5b9076f042d7
CRs-Fixed: 2913913
Updated the EHT related variables as per latest fw cmn headers.
Address review comments from previous EHT gerrits.
Change-Id: I67cd58a4efcf3e06d2ca3b5570432593b1d80825
CRs-Fixed: 2902607
Validate the 6GHz AP beacon in the scan result for valid security
if user enables the 6GHz security checks.
Drop the beacon from scan result if valid security is not found.
Change-Id: I6e02e77cc996b4f4fb7dc7a1678990419a51c79e
CRs-Fixed: 2904741
