Add regulatory APIs reg_get_unii_5g_bitmap and ucfg_reg_get_unii_5g_bitmap
to retrieve the value of "unii_5g_bitmap" stored in regulatory pdev
private object.
CRs-Fixed: 2574642
Change-Id: Iffb004b7fc9d9fbcf1972eb6f527529024e49c70
The 5G cellular RF band and wifi frequency band of UNII-1
(IEEE channels 36, 40, 44, 48) and UNII-2A band (52, 56,
60, 64) can coexist.
UNII-1 and UNII-2A are represented by bits 0x1 and 0x2 respectively in
this implementation. The user space command should set the bits by
applying the following algorithm:
1) To disable only the UNII-1 band channels, set the value as 0x1.
2) To disable only the UNII-2A band channels, set the value as 0x2.
3) To disable both the UNII-1 and UNII-2A band channels, set the
value as 0x3.
4) To restore both the UNII-1 and UNII-2A band channels, set the
value as 0x0.
Change-Id: I8ff747e53b079ee9e0dc762980aee0eea32b23a5
CRs-Fixed: 2571546
Add API to know whether 6ghz is supported. Also add API to know
whether an operating class is 6ghz operating class.
Change-Id: I75747502c0033e31d119e58a2254b220646bba10
CRs-Fixed: 2556998
As FW requires, send WMI_PDEV_DFS_PHYERR_OFFLOAD_DISABLE_CMDID when there
is no beaconing session in DFS channel for FW which supports dfs offload.
Change-Id: I73b86328be6eb132de70bd10406495fbaefcab67
CRs-Fixed: 2554083
To avoid "channel number" collision that was introduced after 6Ghz band was
added to the driver, add frequency based APIs to Global UMAC dfs
dispatcher.
CRS-Fixed: 2526372
Change-Id: Ice72aae699f609f9dadd0717852fa848cb392629
The decision to do CAC when a vap is coming up should be taken based on
the previous channel and current channel. Introduce previous channel
in DFS structure and update it when the current channel is updated.
Use the previous channel and current channel in DFS structure to
decide whether the CAC should be done or not when the vap is coming
up.
Change-Id: Ia359025d5029713c32696dacee5b89618a1c9707
CRs-Fixed: 2538653
Based on the ini "ignore_fw_reg_offload_ind" ignore regulatory
offload indicatin from fw.
Change-Id: Ia95b5bdda6ee1fcc2b07f28f997a7c80afcbc32b
CRs-Fixed: 2533001
Enable configurable dfs_pri_multiplier. The ETSI typ2 type3 radar
detection ratio is lower than expected(>80%) while channel loading is
high(>30%). The host improvement for this are:
1. Add configurable dfs_pri_multiplier, controlled by
DFS_PRI_MULTIPLIER. Default value 2, min 1, max 10.
2. Lower adrastea ETSI type 2/3/4 radar filter rssi_threshold,
controlled by DFS_OVERRIDE_RF_THRESHOLD, dfs log shows that
QCS405 target report RSSI range [18, 45] while radar power
is 3 dbm. By using default rssi_threshold 24 will reject
many radar pulses, which leads to low detection ratio.
3. Calculate deltapri for each searchpri based on dfs_pri_multiplier
in dfs_count_the_other_delay_elements(), check deltapri
between [1, dfs_pri_multiplier] * refpri and searchpri, if
the primargin is desired, mark it as matched pulse.
4. Pick lowpri as refpri for the radar filter with
rf_ignore_pri_window equals to 0 while DFS_PRI_MULTIPLIER is
enabled. Observed original findref logic has some problems
which selects refpri is bigger than lowpri, which leads to
the lowpri pulses pri_match are set to 0, and in this case,
radar was not detected. Example for the issue, assume
rf->rf_pulseid 34 (ETSI type 2) has 7 pulses with pri:
1489, 2978, 2978, 2978, 1489, 2978, 1489 us in this case,
highscore is 4 (2978), scoreindex is 5, refpri is 2978, which
leads to: index 0, 4, 6 pulses with pri_match 0 in
dfs_count_the_other_delay_elements(). The fix is to select
lowpri as refpri(1489 in this case).
Change-Id: I1f3ca3298c9ab1f1e2651ad6b4a0a4810f83f8a1
CRs-Fixed: 2531811
Agile DFS support depends on the Firmware's aDFS support. This
information is propagated to the HOST in the WMI ready event as a flag.
This flag was not used by HOST before enabling agile DFS which resulted
in preCAC being enabled for the FW that does not support them.
Also, for certain chainmask configurations, aDFS should be enabled
only if the current pdev is operating in non 160 BW.
Introduce two new flags in the DFS object:
1. dfs_fw_adfs_support_160
2. dfs_fw_adfs_support_non_160
which specify FW support for ADFS for pdevs in 160 BW and non 160 BW
respectively. Make appropriate changes in is_agile_precac_enabled
check that includes fw support for the current operating bandwidth.
Also rename "dfs_agile_precac_enable" to "dfs_agile_precac_ucfg" and
"dfs_precac_enable" to dfs_legacy_precac_ucfg" in the dfs structure
to properly indicate what those booleans represent.
Change-Id: I202ead8ef109c707bfbda488064ecaa72a3f737f
CRs-Fixed: 2521654
Currently as part of tdls enable link, If the peer is buff
capable or tdls uapsd is enabled in INI. UAPSD is enabled in
FW. Avoid sending this command to FW as it effects the behavior
with AP.
Change-Id: Idc023cb9de3ab63e7643815d473fe0efa98069b9
CRs-Fixed: 2528324
It required to support multiple srng per module in direct buffer rx
component.So extend the array "dbr_mod_param" in dbr pdev object and
let it to support two more srngs per module.
Change-Id: Ia2c649dacc3787cdc13b06f0b22c1c175fb451cc
CRs-Fixed: 2523365
Add helper API to get the center frequency of secondary 80 MHz
segment. Make this API available to Spectral target if layer
via rxops.
CRs-Fixed: 2523690
Change-Id: If1cad90d9b27d1461e802b921aecda07031b1e0b
Vdev decap/encap type has been set when vdev create, don't need
set again when vdev up.
Vdev mlme mgmt.generic.rx_decap_type isn't initialized, can't be
used to set vdev decap type.
Add tgt_vdev_mgr_set_tx_rx_decap_type to set vdev tx/rx cap/decap
type by wlan_util_vdev_mlme_set_param.
Change-Id: If487a890eafd0e4e5e6cda31c22d459e342770de
CRs-Fixed: 2516997
Add an attribute which describes the error code
in the response to set config, start scan and stop
scan.
CRs-Fixed: 2500481
Change-Id: I491cd6e061d2d08ceb4d9af2a7de5223e229c280
Currently a single API(dfs_get_precac_enable) is used to get
dfs_precac_enable and dfs_agile_precac_enable. This API is
wrongly returning value for dfs_precac_enable since agile
capability is set even for Cascade.
Separate out the GET APIs for getting dfs_precac_enable and
dfs_agile_precac_enable so that getting these flags becomes
independent of each other.
Change-Id: I08b0cbcd29c320a345865e3e9456ce3e809e26a6
CRs-fixed: 2501266
WIN and MCL both uses common targer_if code for vdev manager.
So legacy code and "CMN_VDEV_MGR_TGT_IF_ENABLE" macro is removed.
Change-Id: I2984ae44f3a7cfa01b8f1455353d09deb4db5759
CRs-Fixed: 2503804
Provide Global function pointers for accessing DFS/REG APIs that
1. Build channel list as per the configured HW Mode.
2. Reinitialize DFS timers after mode switch.
3. Reset ADFS Config.
CRs-Fixed: 2481535
Change-Id: Ied4d13b0c3ce39e696f273a7ac1f51962671c734
Provide Global function pointers for accessing DFS APIs that
1) allow or prevent the HW pulses. HW pulses are to be prevented
to detect the synthetic pulses.
2) query whether the HW pulses are allowed or not.
Change-Id: Id1e90ba6682afe747774b46da78f7ae6b56c94e6
CRs-Fixed: 2484584
For multi-radio SoCs, wmi handle is maintained per pdev to map to
separate copy engine used for sending WMI commands to taget. Add support
to send wifi position related WMI to send it per pdev.
Change-Id: I300be2bbfd77cb9390fef37b5b02a002284976e0
CRs-Fixed: 2495277
Send proper minimum and maximum agile preCAC timeout values to the target
as part of starting agile DFS detector. Add a common agile preCAC
parameter structure with the timeout values, channel and width fields
which are to be sent as part of configuring agile detector.
Change-Id: If5f5b179aa12a6c549cb9a4402aa10e957129d78
CRs-Fixed: 2482929
Currently vdev response start timer logic is in
target_if layer and stop timer logic is in tgt
layer which is asymmetry.
So, move stop timer logic from tgt layer to
target_if layer for vdev start, stop and delete.
Change-Id: Ia06e2e6d90cf9c4366d654e016e2eeab8c2a0719
CRs-Fixed: 2442199
Add lmac support for vdev delete all
peer request which will replace individual peer
delete for peers under a vdev during vdev down.
Change-Id: I98b5228c17b08eedd50b82372efe1b249cef2699
CRs-Fixed: 2477650
Currently, wakelock apis are in wma. Create vdev resp wakelock apis
in target_if. Plan is to remove it latter from wma.
Change-Id: Ib410ee2404751544db2f291b466ff0d6ff248e8f
CRs-Fixed: 2441245
Add regulatory rx_ops for setting DFS channels availability to be
called from Offload layer.
Change-Id: I15cec0f119baf5668052618dc3a2552470d1f14f
CRs-Fixed: 2384202
Add code to enable sending target_if vdev response to host,
if FW fails to send response within expiry time.
Move timer free functionality to vdev destroy path so as
to make the system not to go into deadlock
Change-Id: I72bdecf2502a755ffc09414f8b72d230bf9c559f
Crs-Fixed: 2449238
CFR requires to configure the number of DBRs that can be packed
in a single DBR event. Currently, this is fixed value.
Make this configurable at the time of registration.
CRs-Fixed: 2415489
Change-Id: Ifcd606641f986a5345f8ccb361c3f45db07fdc37
Add change to use wmi_service_enabled for
wmi_service_sync_delete_cmds instead of using
chipset specific name in target_if
Change QDG_BUG to QDF_DEBUG_PANIC in target_if
vdev response expiry handler.
Change-Id: Ie0f3de2a043198e5aaf5a11add3b8e13b6a47812
CRs-Fixed: 2407877
CFR needs to correlate data received from direct dma ring and WMI event
for tx completion. These two events can come in any order. To facilitate
correlation CFR module has to hold on to the buffer until both events
are received and then replenish buffer back to direct dma ring. To
facilitate this requirement direct rx buf module is modified to change
callback return to bool to indicate whether buffer can be replenished
immediatley or not. Also add API to indiciate buffer release/replenish
later.
Change-Id: I7f0bd7f41ee9362374a5aeb6f506d3f101ec4536
CRs-Fixed: 2403399
If user configures DFS channel in 160MHz mode,
1. change mode to 80MHz and do PreCAC on primary and
secondary channels of 160MHz.
2. Use intermediate channel to operate.
3. Once PreCAC done on the both primary and secondary channels and is clear
then change mode back to 160MHz.
4. Change the channel from intermediate to configured DFS channel.
Use Broadcast and Unicast OMN frame to notify mode change.
Change-Id: I1f2db0f38b42fce2f407988041edfea9c49c58e1
CRs-fixed: 2395431
Enhance target_if/mlme/vdev_mgr by addressing
review comments and update response handling
APIs to handler timers and response bit maps
as expected
Change-Id: I8a5bf3f2931f0c36a367dfebfc898ed2621f3516
CRs-Fixed: 2397184
Add API to update cmn vdev mlme structures,
with the addition of new members to the new mlme
vdev structure,new api's are required to update
those members which will be subsequently used the
new mlme target if layer to send commands to the firmware
Change-Id: I9618613c0ad00f78003cd32951b30b631934ba71
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
Add Tx & Rx callbacks in LMAC structure and
the same will be (de)initialized through psoc
disable and enable from init_deinit component
Change-Id: I346c9076f0966545fb779dc150f5d6498c793308
CRs-Fixed: 2383346
Add Unregister API to de-register and free resources in direct buf
module. Existing logic of freeing all resources as part of pdev destroy
does not take care of soc_start and soc_stop scenarios. Add this API to
enable modules to de-register as part of soc_stop and register during
start.
CRs-Fixed: 2385313
Change-Id: Ibe6f6bc5f4bd2acc5a9fe71eee09c151853073bc
When Spectral is disabled via INI and the rxchainmask is set for
the radio via iwpriv/cfg80211tool, it results in null pointer access
of target_if_spectral pointer. To fix this, add Spectral feature check
inside target_if_spectral_set_rxchainmask.
Change-Id: Ibd43d3bbc8622d4b8502653b55511bb4667cec7a
CRs-Fixed: 2380653
Do not call regdb core functions from other components directly.
Instead, call regdb dispatcher functions.
Also, wlan_objmgr_vdev_obj.h file is removed from reg_services.h file in
Ie43acc03a5c35200f3e43bc978b792d5047eeb77 and reg_services.h is removed
from wlan_reg_services_api.h in I891b14fac7a4eddf2697d2ecdc0ac4a82046f532.
Therefore to fix "'struct wlan_channel' declared inside parameter list"
error in wlan_dfs_utils_api.h file, I have included wlan_objmgr_vdev_obj.h
file before wlan_dfs_utils_api.h in scan, dfs and wmi component.
Change-Id: Id8816f5137c3b1f9200c59fc3f9041980631f22f
CRs-Fixed: 2349173
NAN will not be needed in CMN codebase, to reduce the
unnecessary lines of code all the NAN related files have
been merged into CLD. Remove all those files from CMN,
remove NAN related API's and structures from init-deinit,
target if and lmac components.
Remove NAN component and related files from CMN.
Change-Id: I8fa22b84aff30cfbb7a8cd0a573acf6e0a9d8744
CRs-Fixed: 2338061
When CONFIG_MOBILE_ROUTER is enabled there are build failures
due to improper featurization of NAN, so fix the featurization.
Change-Id: I6bc11fb82394c2d32b328cb5d50ff974051755e1
CRs-Fixed: 2353170
Introduce a new wmi_send pdev param to enable/disable
"Subchannel Marking" in Firmware (only in Full Offload)
Change-Id: I3cd4f4f13ebca72c4505b6195cc8dc4856d41671
CRs-Fixed: 2334258
1. Send add random mac addr rx filter WMI command
to target
2. Add/Del the active random mac addr entry
3. Clear random mac addr from target if not active
Change-Id: I9dcbdc20b76d9865da7a8db6ee013bf5e44e4407
CRs-Fixed: 2322097
