Add function name and line number while taking/releasing
references for vdev to trace Object Manager references
Change-Id: Ie8a7d77db2f3c7b58536ab267c665299cb67152e
Add function name and line number while taking/releasing
references for peer to trace object manager references
Change-Id: I93c30d62ecaa979f8c2680eec68f723d2d3c4292
Currently CTRY_JAPAN15 is not there in host regulatory
database and it is still in use. If CTRY_JAPAN15 is set
from BDF, driver load will fail as this country is not
present in host driver database.
To address this issue add CTRY_JAPAN15 to regdb.
Change-Id: I031b766ac34d57193ded4856b1396306cd5bb76d
CRs-Fixed: 2590635
RSSI in the scan entry is a negative value. It was converted to positive
value and if the converted value is greater than WLAN_RSSI_DUMMY_MARKER
(has positive value 295), util_scan_entry_rssi() was returning 0 to the
caller.
util_scan_entry_rssi() is used for printing RSSI value. Since RSSI is saved
as a negative value and caller expects it as a negative value, return a
negative RSSI value from util_scan_entry_rssi().
Change-Id: Ifdeb88dfa42a6927ff29670429d846ff071e9c59
CRs-Fixed: 2576129
Derive pdev_idex from pdev object, not from target_pdev, as
target_pdev's pdev_idx can change in run-time when dynamic
mode switch feature is enabled.
Change-Id: Iff1bf0370764ec462d66f145dddbd1868fae426c
qdf_print_thread_trace() currently uses stack_trace_save_tsk() to save
task stack strace into a storage array, but stack_trace_save_tsk() is
undefined because it is not exported. Switch to using
save_stack_trace_tsk() as originally was done.
Change-Id: Ie90cdd87233581718e9a40436128a92691fc9a17
CRs-Fixed: 2587454
Block ack and ack frame is composed and sent to up
layer after a unicast packet to AP is received for
tx capture feature.
Change-Id: I4b6bb35fa093432539d15d09a93f85a8ec700b34
Reduce the number of CEs used in QCN9000 to 6 since it has only
one mac and requires only 6 CEs. CE7 and CE8 are reserved for FW
and not needed to be configured from host
Change-Id: I989ffdb0219e2628bac5536e25c4cb2dbba6b7fb
Do not request interrupt if DISABLE_INTR flag is set in CE flags.
This check is already present in hif_ahb_configure_irq but is missing in
MSI path.
Change-Id: Icabe68298737dc412949484f6d3fdcd8c05910d5
Add peer assoc parameter for 6GHz Band Capabilities information
for the corresponding FW peer assoc parameter.
Change-Id: I3bc4361e449843cf73db8426d3bd97dbcd9903ed
When FCC type 4 radar is injected at +/-30MHz separation from center
frequency in VHT 80MHz mode, incorrect pulse duration is reported in the
radar summary reports and lead to decreased radar probablity detection.
Fix the issue by capturing pulses with such characteristics and
modify them to fit within the valid phyerror pulse duration range.
Change-Id: Ic6314a372d6909448fbe4eb694c41736d1719712
CRs-Fixed: 2573339
Add wmi resource flag to send packet capture from host
to FW. Register Offload Event Id for packet capture mode.
Change-Id: Icd9e542a517c8b267a228324b7612ddded28f182
CRs-Fixed: 2528439
when lot of fragment frame with invalid peer_id indicated to
host through reo exception ring, excessive logging cause srng
lock hold long time.
degrade log level as a WAR to avoid excessive logging.
Change-Id: Iffb18ad723d1ac5955868cc8ec99bb0198785ee5
CRs-Fixed: 2584610
In case of channel mismatch, RSSI and channel etc are updated from
previous frame. Also in hidden SSID case the SSID is updated from
prev frame for beacons.
So print the beacon after updating these params from previous frame.
Change-Id: Ia4dc4769f7bccf4698074a3bcedefd1909fd2e7b
CRs-Fixed: 2587067
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2584839
as we are overriding bar ppdu information, we need bar start/end
timestamp and duration.
added resp_type, mprot_type, rts_success and rts_failure in
cdp completion user.
Change-Id: I53c215e948fad8d079e1d4c40ec07d34aff1fefe
Add WMI and objmgr support for maintaining RNR
buffer cache and receive tbtt events for all
vdevs using existing tbtt offset WMI.
Change-Id: Idfed63e104e629fbe455d1cf6202cd9b332f5cf9
On rekey, the STA resets it’s PN to 0 but, the
AP sends out pending traffic with old PN values
before it resets the PN as well.
This causes traffic to stall and hence, TSC (transmit
sequence counter) should not be set to zero during rekey.
Instead, obtain last PN number for a non-bss peer while
configuring new key and pass the values to hostap.
Change-Id: I4a604f23944c941c6ade2f57ab03781bc78f7b40
While preparing roam offload buffer, possible out of bound write
for pmk buffer in send_roam_scan_offload_mode_cmd_tlv.
Change-Id: Iadaf8261ef4440c7cb282af7b1321ebc5d08b5e5
CRs-Fixed: 2579401
remove multiple update of tid for same ppdu stats.
tid is populated from user rate, completion common and
ack ba status tlv. As tid from ack ba status tlv comes wrong
for non-qos tid. we remove the tid populate in ack ba status tlv.
Change-Id: Ia8b0004fc329bf0fecc1a622e199635034c213a7
A value of 0 in TBTT Information Count subfield indicates
one TBTT Information field is present.Test expression in
for loop should consider 0 as a valid value to avoid infinite
loop.
Change-Id: I0dc0f694147b6c4f91a8be0bfbd7c6d4bb95e1f1
CRs-Fixed: 2582936
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size:
When the frequency range is not very large, a smaller size
(e.g. 16bit integer) can be used. It saves a large amount of space
especially when many large arrays containing elements of this type/size
are defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: I6349c0665bf0a7329627427913f9eebba2821043
CRs-Fixed: 2586177
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:-
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD ) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size: When the frequency range is not very
large, a smaller size(e.g. 16bit integer) can be used. It saves a
large amount of space especially when many large arrays containing
elements of this type/size are defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: Ie503623ec6e4473abe8ee95c19dc4470853326dd
CRs-Fixed: 2586177
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size:
When the frequency range is not very large, a smaller size (e.g.
16bit integer) can be used. It saves a large amount of space especially
when many large arrays containing elements of this type/size are
defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: Ie205befb82f643808973286ae578d7add7738eec
CRs-Fixed: 2586071
For cdp_hl_fc_set_td_limit() API, use channel frequency instead of
channel number.
Change-Id: I852f1fc192374a4b603e615664d7fb27ea984f5f
CRs-fixed: 2565737
The w53 updated pulses should be detected by the DFS algorithm.
- Add new DFS filters to MKKN filter table.
- Introduce duration margin check in confirm radar routine.
Change-Id: Icf3fecb5c6027ba827cac05dbd43a1a55463209b
CRs-Fixed: 2582300
Currently in dp_rx_wbm_err_process, we donot handle
HAL_REO_ERR_BAR_FRAME_2K_JUMP and HAL_REO_ERR_BAR_FRAME_OOR REO errors.
Add support for the same.
Change-Id: I22147fcd2d531c1e08214626796994593ffeb3a6
CRs-Fixed: 2580876
In 6Ghz the HT and VHT IE are not present and channel info is
present in HE OPs 6 Ghz params.
So fill channel from HE OPs for 6Ghz AP.
Change-Id: I2dbe6ecedb8949b7d9d3b26b43fbe4b6d3ef0a42
CRs-Fixed: 2585788
With this change, in concurrent mode
(SAP on 2.4ghz and peer connected + STA Scan ongoing),
active dwell time is kept unchanged.
Change-Id: I465873dec79906d078f5ec00c49641f66867c6a7
CRs-Fixed: 2581121
Add WMI unified APIs to extract PNO related WMI events in order to
remove wmi.h inclusion in target_if_scan.c.
Change-Id: I7fd28f175de002b48c294783f69b819ce2f3e37a
CRs-fixed: 2519032
Update the regulatory database with the following changes:
1) Add full reg domain FCC15_FCCA, FCC16_FCCA and FCC17_FCCA.
2) Add associated 5G reg rules and channel bands for the new regdomains.
Change-Id: I2b6038d0f106555adf650c12ca48efcaacc69071
CRs-Fixed: 2582502
expected tlv bitmap can't be guaranteed as different ppdu frame has
different expected tlv bitmap. Check last tlv before sending stats
as tlv are coming from firmware in sequential order.
retry counter is not populate correctly, only successful
completion ppdu status get update
Change-Id: Ia4b71371bbf38996df9dbb67746078d5fbd628a1
