Append 4 bytes enhancement flags in ANI_MSG_APP_REG_RSP message.
NL_ENABLE_OEM_REQ_RSP i.e. 0x00000001 in ANI_MSG_APP_REG_RSP message
represents host driver support for NLA type request and response
for oem commands.
Change-Id: I5d07d017a27b676537c24fbf15f224af8964c665
CRs-Fixed: 2591896
Add initial set of coex files, implement the basic functions.
Coex component is used to process coex related configurations.
CRs-Fixed: 2565088
Change-Id: I8b9600809691b808f97c621cb329a6ab9941814c
The printk buffer is protected by a global raw spinlock for readers
and writers. This restricts the contexts that are allowed to
access the buffer. So large latencies exists when printing to
kmsg done with QDF trace levels WARN, INFO, ERROR. This results
in roaming KPI for maximum transition time exceeding the expected
100ms.
So change info/err prints to debug prints in roaming path
to reduce delays in roaming time.
Change-Id: I9cdf043da6e88d735ab39812e74ed24784ceede3
CRs-Fixed: 2594867
Add an API wlan_reg_get_opclass_details, to get the operating class
table details from the regulatory component. Also, add a new structure
regdmn_ap_cap_opclass_t in the regulatory component, to fill members
of the mapapcap_t structure.
Change-Id: I8b6a3867a766038663c10ce2f01a8b7d310c7375
CRs-Fixed: 2580505
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new feature to configure the probe response or
fils discovery frame.
Change-Id: I3b9842021db94515ae4dccbcdc573a4cd84caa56
CRs-Fixed: 2591147
Parameter freq type has a conflict in reg_is_dsrc_freq(qdf_freq_t freq)
and reg_is_dsrc_freq(uint16_t freq) functions.
Change the type to qdf_freq_t in these functions.
Change-Id: I4c348778a7cb2fd588799332241701357de90422
CRs-Fixed: 2595642
The variables center_freq_seg0 and center_freq_seg1 in struct
ch_params are used to represent channel numbers. Their types
were wrongly changed to qdf_freq_t in change ID
e205befb82f643808973286ae578d7add7738eec. Change their type
back to uint8_t.
Change-Id: I13c629850bf207c6088b44c8695167e96dc33476
PNO scan is failing to start because it is coming with 97 channels
but the current max number of channels in PNO scan is 60. To allow
for a larger number of channels, increase SCAN_PNO_MAX_NETW_CHANNELS_EX
to 100.
Change-Id: I3ac08f83f9f500899656caf48c112c33580cef70
CRs-Fixed: 2585685
Allocate node for new entry and add it to existing list of function or line
If function or line already present in list then increment count
Change-Id: I3d737dcd33862f133b52c6d694c89f6d6b1517a5
Add the API wlan_reg_get_opclass_from_freq_width, to give country_iso,
channel frequency, channel width and behaviour limit as input, and get
the operating class as output.
Change-Id: I96c39119ab855d10965b2603e8b15c21699daa68
CRs-Fixed: 2583789
When enalbe DSRC feature, member reg_dmn_pair_id of struct
country_code_to_reg_domain g_all_countries[] may equal FCC10_FCCA.
However, FCC10_FCCA can't be found in array g_reg_dmn_pairs[].
So, add FCC10_FCCA into arry g_reg_dmn_pairs[].
And, fix one compile issue.
Change-Id: I6069c43505e15312d8bd9be48495998c31f1f8eb
CRs-Fixed: 2590094
CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_peer_unmap_sync_cb_set
- txrx_fw_stats_get
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: I4472dc0905edb7700acb4401b117c8876ba455f3
CRs-Fixed: 2541460
Add the operating classes 129 and 130 to the US, Europe, Japan,
and Global operating class tables in the regulatory component.
Change-Id: I930019c2b14451de57a92c069a77c27fb56d273b
CRs-Fixed: 2587094
In regulatory non-offloads feature, send conformance_test_limit_2G,
conformance_test_limit_5G, reg_domain, reg_domain_2G and reg_domain_5G
information to firmware using WMI_PDEV_SET_REGDOMAIN_CMDID.
If all these attributes are not populated then CTL power limit is
not applied by the firmware.
Change-Id: I1523ab447aec64ec0af42da32318136f90fd17ca
CRs-Fixed: 2518246
Add function name and line number while taking/releasing
references for vdev to trace Object Manager references
Change-Id: Ie8a7d77db2f3c7b58536ab267c665299cb67152e
Add function name and line number while taking/releasing
references for peer to trace object manager references
Change-Id: I93c30d62ecaa979f8c2680eec68f723d2d3c4292
Currently CTRY_JAPAN15 is not there in host regulatory
database and it is still in use. If CTRY_JAPAN15 is set
from BDF, driver load will fail as this country is not
present in host driver database.
To address this issue add CTRY_JAPAN15 to regdb.
Change-Id: I031b766ac34d57193ded4856b1396306cd5bb76d
CRs-Fixed: 2590635
RSSI in the scan entry is a negative value. It was converted to positive
value and if the converted value is greater than WLAN_RSSI_DUMMY_MARKER
(has positive value 295), util_scan_entry_rssi() was returning 0 to the
caller.
util_scan_entry_rssi() is used for printing RSSI value. Since RSSI is saved
as a negative value and caller expects it as a negative value, return a
negative RSSI value from util_scan_entry_rssi().
Change-Id: Ifdeb88dfa42a6927ff29670429d846ff071e9c59
CRs-Fixed: 2576129
When FCC type 4 radar is injected at +/-30MHz separation from center
frequency in VHT 80MHz mode, incorrect pulse duration is reported in the
radar summary reports and lead to decreased radar probablity detection.
Fix the issue by capturing pulses with such characteristics and
modify them to fit within the valid phyerror pulse duration range.
Change-Id: Ic6314a372d6909448fbe4eb694c41736d1719712
CRs-Fixed: 2573339
In case of channel mismatch, RSSI and channel etc are updated from
previous frame. Also in hidden SSID case the SSID is updated from
prev frame for beacons.
So print the beacon after updating these params from previous frame.
Change-Id: Ia4dc4769f7bccf4698074a3bcedefd1909fd2e7b
CRs-Fixed: 2587067
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2584839
Add WMI and objmgr support for maintaining RNR
buffer cache and receive tbtt events for all
vdevs using existing tbtt offset WMI.
Change-Id: Idfed63e104e629fbe455d1cf6202cd9b332f5cf9
On rekey, the STA resets it’s PN to 0 but, the
AP sends out pending traffic with old PN values
before it resets the PN as well.
This causes traffic to stall and hence, TSC (transmit
sequence counter) should not be set to zero during rekey.
Instead, obtain last PN number for a non-bss peer while
configuring new key and pass the values to hostap.
Change-Id: I4a604f23944c941c6ade2f57ab03781bc78f7b40
A value of 0 in TBTT Information Count subfield indicates
one TBTT Information field is present.Test expression in
for loop should consider 0 as a valid value to avoid infinite
loop.
Change-Id: I0dc0f694147b6c4f91a8be0bfbd7c6d4bb95e1f1
CRs-Fixed: 2582936
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size:
When the frequency range is not very large, a smaller size
(e.g. 16bit integer) can be used. It saves a large amount of space
especially when many large arrays containing elements of this type/size
are defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: I6349c0665bf0a7329627427913f9eebba2821043
CRs-Fixed: 2586177
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:-
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD ) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size: When the frequency range is not very
large, a smaller size(e.g. 16bit integer) can be used. It saves a
large amount of space especially when many large arrays containing
elements of this type/size are defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: Ie503623ec6e4473abe8ee95c19dc4470853326dd
CRs-Fixed: 2586177
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size:
When the frequency range is not very large, a smaller size (e.g.
16bit integer) can be used. It saves a large amount of space especially
when many large arrays containing elements of this type/size are
defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: Ie205befb82f643808973286ae578d7add7738eec
CRs-Fixed: 2586071
The w53 updated pulses should be detected by the DFS algorithm.
- Add new DFS filters to MKKN filter table.
- Introduce duration margin check in confirm radar routine.
Change-Id: Icf3fecb5c6027ba827cac05dbd43a1a55463209b
CRs-Fixed: 2582300
In 6Ghz the HT and VHT IE are not present and channel info is
present in HE OPs 6 Ghz params.
So fill channel from HE OPs for 6Ghz AP.
Change-Id: I2dbe6ecedb8949b7d9d3b26b43fbe4b6d3ef0a42
CRs-Fixed: 2585788
With this change, in concurrent mode
(SAP on 2.4ghz and peer connected + STA Scan ongoing),
active dwell time is kept unchanged.
Change-Id: I465873dec79906d078f5ec00c49641f66867c6a7
CRs-Fixed: 2581121
Update the regulatory database with the following changes:
1) Add full reg domain FCC15_FCCA, FCC16_FCCA and FCC17_FCCA.
2) Add associated 5G reg rules and channel bands for the new regdomains.
Change-Id: I2b6038d0f106555adf650c12ca48efcaacc69071
CRs-Fixed: 2582502
Introduce a new DFS domain MKKN that supports new w53 Japan RADAR
pattern only.
Initialize a new empty RADAR table dfs_mkkn_radars for MKKN DFS domain.
Map The 5G regdamain MKK17 to the new DFS domain MKKN to make sure that
the new w53 Radar pulses should be detected only by JP country or
MKK17 5G regdomain.
Change-Id: Ib0f6a7e98353c9930e90703ead2342b932e491e3
CRs-Fixed: 2575347
Remove the unused API wlan_reg_get_5g_bonded_channel_and_state in the
regulatory component
Change-Id: I45c9b083dfb6faf6c97293d54200ed4f15a7d289
CRs-Fixed: 2574154
In wlan_objmgr_get_vdev_by_macaddr_from_pdev driver checks the
first vdev matching the mac address and try to get ref and return
NULL if it fails.
In case if a vdev is logically deleted but not physically deleted
(some ref are pending) and a new vdev is added with same mac address
at the tail of the vdev list, the
wlan_objmgr_get_vdev_by_macaddr_from_pdev always return NULL cheking
for the logically deleted vdev, even when a valid vdev is present
after the logically deleted vdev.
Thus continue to next vdev if try get ref fails for the vdev.
Change-Id: Icd67ce8830460fca7bb4c19e81b2e9f764fb5dba
CRs-Fixed: 2580697
Restricted 80+80 MHz capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit.
Please note, wmi_service_bw_165mhz_support will be renamed as
wmi_service_restricted_80p80_support once the FW changes are available.
Change-Id: I88f89eecd916c40ea8669c792dde3a335e4bac56
CRs-Fixed: 2579543
1) Add the API wlan_reg_get_5g_bonded_channel_and_state_for_freq
that returns the state for a 5G or 6G channel frequency,
based on the channel width and and state of the bonded channels.
2) In the API target_if_calculate_center_freq, remove the instances
of IEEE channel number, and provide regulatory support, with the
channel frequency based structure - bonded_channel_freq and the API -
wlan_reg_get_5g_bonded_channel_and_state_for_freq.
3) Remove the usage of band_info and replace it with reg_wifi_band within
the target_if of the spectral module.
Change-Id: If5108b55097208d33fafb48968ea8b6dc83011fa
CRs-Fixed: 2571906
Before mode switch command is sent to firmware, the NOL channels are
reset. But the regulatory channel structure for these corresponding
channels are still disabled. After mode switch response, when
the new umac channel list is built, these channels are still marked
as disabled in regulatory, which results in the umac channel list
not having these channels at all.
Re-enable the NOL channels in the regulatory channel list after
NOL reset.
Change-Id: Ifad8ec7a5be53e061045c068f9a6bfc313d4985c
CRs-Fixed: 2580403
In functions that use key values, reset the local variables (key) to
zero after use to avoid security vulnerability.
Change-Id: I105b1abf7c707102ef99bbe4fa213708039d933e
CRs-fixed: 2581402
Define framework to notify registered callbacks on peer freed.
Interested modules can register their callbacks with object manager.
Change-Id: I9ab0e45f7841b1609b9ada3b50335299b462b630
CRs-Fixed: 2578099
Move MACRO definition of TWOG_CHAN_6_IN_MHZ out of
ifdef CONFIG_CHAN_FREQ_API, move to public header file,
then other components can use it.
Change-Id: Ieb4b2b167c664246d39949ad4f8d53eda6b9d7de
CRs-Fixed: 2580207
