Limit the total number of tx descriptors allocated using tx_device_limit
ini configurable parameter.
Change-Id: I00b4aa089b235e45bc6c445c57ce32b977d872c3
Add tx device limit configurable from INI.
This is used to limit the overall tx descriptors used in the device
Change-Id: I51e9611ca14bdc146de914317b38b98329130c9f
Add dp_tx_desc_limit for 5G high, 2G and 5G low to limit the
number of software tx_desc to be allocated.
Change-Id: If97e858b73aafaed0e21fc8f6e0337e467ce0ecc
Add support to print vdev req/resp string
on target_if timer start conflict and timer
timeout handler
Change-Id: I0116c03089f4ab80623596bb9e8d0268efb0dd87
CRs-Fixed: 2495018
Update rx error stats. It is a summation of below failures:
- desc_alloc_failure [No free desc available]
- csum error [IP/TCP_UDP]
These failure stats are updated at pdev level and no need
to aggregate this.Directly add at pdev level and export.
Change-Id: I0a5fa8f972babf092163f3cb2d0093547ded4877
CRs-Fixed: 2496037
WMI functions called from target_if are present at WIN code. So these
wmi changes are moved to common code, so that MCL and WIN both use.
MCL needs this wmi code for target_if vdev conversion.
Change-Id: I6f3653ea0fad14f3cdbb32a8dc65e5146ce0a5c8
CRs-Fixed: 2492577
Handle only single nbuf in dp_rx_deliver_to_stack_no_peer. Make sure to
terminate nbuf->next = NULL before delivering it.
Change-Id: Icec76da3b5c5cfd2682489db51cd115e8bc9b830
CRs-Fixed: 2497966
During radar detection, with subchannel marking enabled, when the mode
is HT160, the secondary segment center frequency is determined by
adding +40 offset to the 160 band center frequency.
Consider the case where AP comes in channel 116 HT160. In this case,
the secondary segment center frequency is 5530 which is -40 to the
160 band center frequency (5570).
Primary segment center frequency is 5610 (+40 offset).
Due to this wrong offset addition, the channels added as part of
radar detection are in the wrong segment.
Find proper secondary segment center frequency used for radar
detection.
Change-Id: Icb527fad4fd1317acf8c2b9c010a8ac6a765f985
CRs-Fixed: 2475720
Replace mlme void * data members having different types across
different drivers with specific type.
Change-Id: I4343800e836c8ae0996c19b39a420b314e465a75
CRs-Fixed: 2477457
Printing ring stats from requesting txrx stats needs access PCIe link
so make sure it is resumed by doing a sync resume if it is runtime PM
suspended. Also response of h2t_ext_stats_msg from FW is not guaranteed
so tag it properly so that in HTC layer, corresponding "put" API will
be called right after sending the packet.
Change-Id: Idc5797b38557ed5779d920c72200b9d28769ab58
CRs-fixed: 2487521
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add code to remove void pointer usage for htt_soc
and introduce opaque pointer to be used intead of void
from dp layer into htt layer
Change-Id: I555b67af656e89f63d81bb5aa8c7472ea517ae85
CRs-Fixed: 2484402
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Make change to remove usage of void pointers for
ring descriptors and instead use a opaque pointer
dp_ring_desc_t.
Change-Id: Ia1e9a3da9eaa3cccf297b2135b52a72f2fe21431
CRs-Fixed: 2484409
Add code to remove void pointer usage for hal_soc
and introduce opaque pointer to be used intead of void
from dp layer into hal layer
Change-Id: Ia38571174c6ed79558d0f0c9cd1a0f4afaa66483
CRs-Fixed: 2480857
Remove dereferencing of htt_soc structure from dp layer
and instead use HTT APIs.
Change-Id: I6b796f9b6504c763e6df2cf49b15bf3eecfbdf69
CRs-Fixed: 2483401
Add code to use cdp_vdev instead of void pointer for
API dp_tx_send_exception and dp_tx_send_mesh
Change-Id: I63ca5a62c2a8cd6feb906181702888814650dfce
CRs-Fixed: 2480836
It is very critical to know the source of who requests runtime
PM resume to debug all kinds of runtime PM related issues. Hence
log them accordingly.
Change-Id: I9551830b1cb567fd29e9d9bbec18705f9cc5e9ec
CRs-fixed: 2496481
After enabling WAKE IRQ during runtime PM suspend, it is able to come
anytime because device wants to wake up. In order to avoid missing
to handle the IRQ and missing resume, set WAKE MSI monitor variable
before enabling WAKE IRQ.
Change-Id: I450e2d7a28f68818e12ff000a36275707a9b97b0
CRs-fixed: 2496603
Commit 13835b1aa2 ("qcacmn: Do not access bus in suspend_noirq")
adds enable/disable WAKE IRQ through hif_apps_irqs_enable/disable
APIs to bus suspend/resume routine which are also called by runtime
PM routine. However, runtime PM suspend/resume routine will also
enable/disable WAKE IRQ by itself so WAKE IRQ will be disabled twice
and only enabled once before entering suspend so the WAKE MSI will
be masked which results device requested resume failure. It is also
same for resume path. Hence remove enable/disable WAKE IRQ from
runtime PM routine.
Change-Id: I5774d0450c70f3ff74ea81dc44ef3656eb8c7a96
CRs-fixed: 2495897
Replace cp_stats void * data members having different types
across different drivers with specific type
Change-Id: I5497df358e495aaf187097b093622b34ab637f42
CRs-Fixed: 2477447
NS offload is not working for NaN mode because BSS peer is not set.
Hence, set the BSS peer for NaN mode as it is done for SAP/P2P GO.
Change-Id: I4c8fbd502cb1d90dd235ae35d0a85a9981e68773
CRs-Fixed: 2494515
Enable HTT_PPDU_STATS_TX_MGMTCTRL_PAYLOAD_TLV in pktlog LITE_T2H
to reap mgmt/ctrl information. This tlv is enabled by
changing the bit mask DP_PPDU_TXLITE_STATS_BITMASK_CFG to 0x3fff.
Change-Id: I2996cd8df7f6e05e18ec603d21c488bb1fe0c70a
CRs-Fixed: 2481454
WAKE MSI can be triggered and handled properly for both unit test
framework and runtime PM feature in runtime, so there is no need
to have a compile time flag. Hence remove it.
Change-Id: I97127575114d6be40b36a7417cc7c177cec69808
CRs-fixed: 2496366
Mark CE5 as unused when pktlog feature is disabled. This provides memory
savings by skip configuration and replenish of the copy engine used for
packet log
Change-Id: I1bdd3355b84f257a2dbfe58a2752824a096b81e8
CRs-Fixed: 2495320
When wlan logging is turned on in developer options
wlan logging verbosity level is set to active and
pktlog buffer will also be passed to
wlan_pkt_stats_to_logger_thread. In this API we call
skb_put multiple times to copy ath_pktlog_hdr(16 bytes)
and pktlog buffer (2048 bytes) = 2064bytes which is leading to
skb_over_panic as the skb length is set to 2048 bytes.
Increase the skb size to 2112 bytes which can accommodate
2048 bytes (pktlog buffer size) + 16 bytes(ath_pktlog_hdr) +
8 bytes (pkt_dump) + 40 bytes (future use) to avoid overflow.
Change-Id: Ia8bda14f45d2eb77357bf7e46a12c1062d56d8e1
CRs-Fixed: 2489338
Currently, mgmt_txrx_get_action_frm_subtype does not handle
ACTION_CATEGORY_FST. In case action_category is
ACTION_CATEGORY_FST, mgmt_txrx_get_action_frm_subtype
returns MGMT_FRM_UNSPECIFIED due to default handling. Function
tgt_mgmt_txrx_rx_frame_handler returns QDF_STATUS_E_FAILURE
on receiving MGMT_FRM_UNSPECIFIED frame type and drops mgmt
frames.
Fix is to add support for ACTION_CATEGORY_FST in
mgmt_txrx_get_action_frm_subtype to avoid drop of FST mgmt
frames. Add new management frames
MGMT_ACTION_FST_SETUP_REQ, MGMT_ACTION_FST_SETUP_RSP,
MGMT_ACTION_FST_TEAR_DOWN, MGMT_ACTION_FST_ACK_REQ,
MGMT_ACTION_FST_ACK_RSP, MGMT_ACTION_FST_ON_CHANNEL_TUNNEL.
Add handling for ACTION_CATEGORY_FST in
mgmt_txrx_get_action_frm_subtype, Find fst frame subtype and
return fst frame subtype from mgmt_get_fst_action_subtype
instead of returning MGMT_FRM_UNSPECIFIED in case FST
action_category is received.
Change-Id: I67b7c14f03cab252b13b677a2c9f20a327be24bd
CRs-Fixed: 2495273
Currently peer_adv_stats is present in peer_cp_stats structure
which is shared between WIN and MCL and only common features
should be part of this structure as peer_cp_stats is an
abstraction structure for WIN and MCL for cp stats component.
Since peer_adv_stats is MCL specific structure, this should be
moved to peer_mc_cp_stats which is MCL specific feature for
cp stats component.
Change-Id: Id46cdd153aa6b8137c24fdca30365221d2646d3f
CRs-Fixed: 2480147
Rssi_in_dbm has incorrect format specifier due to which
it returned large values,change it to correct specifier.
Change-Id: I06426e36b6abf5b915d039dfea8afd5d3aa06195
CRs-Fixed: 2490087
Use common definition for copy_vdev_create_pdev_id and remove
copy_vdev_create_pdev_id defined under CONFIG_MCL.
Change-Id: Ie8421d519970cae28f003b435aebabb5a935bebd
CRs-Fixed: 2492726
Monitor buffer are required only when monitor VAP is created. Allocate
these buffers only when montior VAP is created. This provides memory
savings when no monitor VAP is created/required.
Change-Id: I3ddaef00615f00fd13adb2789469a62f1a0af165
CRs-Fixed: 2491873
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size and fix related compilation issue.
Change-Id: Id2344e6ed21caefa459773bb6e891ffb1e70cb92
CRs-Fixed: 2491455
