Introduce API to populate parameter for connecting event
logging in order to be printed after STA INFO
event.
Add wlan_cm_is_first_attempt() api in order to
restrict the logging of STA INFO and connecting
event to first connection attempt.
Change-Id: Ica4253eea71ba72ea5176f733402d0758797463b
CRs-Fixed: 3599759
Add a new QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY to
configure, retrieve, and report per-link transmit latency statistics.
When used as a command, userspace configures transmit latency monitoring
and get the corresponding statistics of the last period. When used as a
command response, driver replies the get action from userspace with the
statistics of the last period. When used as an event, driver reports the
statistics periodically.
Change-Id: I46966cd6bbad2deed7b2ad81e730170625907f67
CRs-Fixed: 3603431
Currently the user configured MFP state that comes from the
userspace in connect request is not handled or processed.
Instead the RSN caps from assoc IE of connect request is inter-
sected with AP RSN caps and sent to Firmware using RSO command.
This RSN caps is used in FW in selecting a roam candidate, which
was causing the cross AKM (eg:SAE -> PSK) roam fail.
Hence, use the user configured MFP value in sending the RSN caps
to Firmware.
CRs-Fixed: 3606069
Change-Id: I3facfcf3616667b4749109d26d924c3fb1537494
Currently, in some API such as
"wlan_cfg80211_tdls_add_peer_mlo", when driver gets vdev, it is
MLO vdev, so it uses WLAN_MLO_MGR_ID ID, but when it tries to put
the vdev, since disconnection happens and mlo flag is cleared,
so it uses WLAN_OSIF_TDLS_ID ID which is non-ML vdev.
This causes release of vdev reference from different id for which
it never takes reference and result in crash.
To fix this, use same debug id throughout function. For that,
generalize the get_ml_vdev API by passing the debug id as
argument to the function.
Change-Id: I5800d207fdd17692297e71a0a9cdbcb86a4c5650
CRs-Fixed: 3608817
Add nl80211 vendor event index
QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY_INDEX, which is used to report
per-link transmit latency statistics.
Change-Id: I62bb668ebf6b3d10c0100448eb41bde29540890d
CRs-Fixed: 3596760
To enable support for nested array policy, define macro
VENDOR_NLA_POLICY_NESTED_ARRAY to take care of the version
compatibility.
Change-Id: I2d9e3079c0a6b34c61767ec50b0c404beb3240df
CRs-Fixed: 3596074
Add a vendor attribute for an EHT DUT to configure the type of TID-To-Link
Mapping Negotiation Support for testing purposes.
Change-Id: I9e39fa1acfa07bf8e2514172adeed7a7d01f8abc
CRs-Fixed: 3608356
Add a vendor attribute for EHT testbed STA to configure MLD ID in the ML
Probe Request frame transmitted as part of host initiated scan request.
Change-Id: I759d147238f176a8aa1db62381528f81a92ba459
CRs-Fixed: 3605356
Define a new QCA vendor test config attribute to configure powersave
on MLO links.
This attribute is used for testing purposes.
CRs-Fixed: 3605466
Change-Id: I67daaa5c774aea20f139a60f04758babbfe32319
This change is to use ml dev context to fetch
link info, As ml dev context is available in both
vdev and psoc context. It's valid for both standby
and active links.
Change-Id: Ib705bd5a5a1144f980295331f5f26ba667906cf1
CRs-Fixed: 3568944
Currently if STA connected in 11BE mode, EHT Operation IE is not
getting updated in big data stats.
Add vendor command to support EHT operation IE,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_EHT_OPERATION.
Change-Id: I10bf45fcd6eeb7c06980d15a845be00ffdd72cde
CRs-Fixed: 3598720
With new sun kernel, wep keys are deprecated,
resulting in compilation issues. Fix this by
not using wep_keys if kernel is sun or greater.
Change-Id: I2c79545798825ae7c963885356595e5fa35b910a
CRs-Fixed: 3601939
Add a QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_AMPDU_CNT to
enable configuration of TX maximum aggregate size with a specific peer.
This can be used to improve performance in noisy environment. In AP
mode, the peer MAC address of the associated STA is specified with
QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC.
Change-Id: I659659d9277d9c22024164d12636315952866654
CRs-Fixed: 3603816
Rename the attribute QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC
to a generic name QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC, so other
configuration commands can reuse it. And make backward compatibility of
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC, define it as same
value of QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC (35).
Change-Id: I393afb23df697321bd49c4f6d87213050f218d75
CRs-Fixed: 3603779
Based on the new requirement, add support for vendor event
to switch the audio transport bearer.
Change-Id: Ic83cff67e92554c55de96b9453f097e41683b60b
CRs-Fixed: 3585411
Based on the new requirement, add support for vendor command
to switch the audio transport bearer.
Change-Id: I85e61dfbcec55bad7685f143d7128654e47b66f3
CRs-Fixed: 3585196
When roam from mlo to slo/legacy/owe, mlo_cleanup_link is called to
disconnect link vdev, mlme_cm_osif_disconnect_start_ind is called,
WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER is sent, then Tx queue is disabled,
all tx pkts can't be sent.
To fix it, when disconnect link vdev for roaming to slo/legacy/owe,
don't send WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER by checking special req
source CM_MLO_ROAM_INTERNAL_DISCONNECT.
Change-Id: Iacfc2f82069b2c21951af97c23c60ea99865a80d
CRs-Fixed: 3600747
When updating the AP link address and channel info after
roaming, update the self link address also to the link switch
context on each vdev. This information will be fetched while
sending roam + auth event to userspace after roaming.
Change-Id: I363a5ee8d65bb21d84c15879996369f4e397f2a6
CRs-Fixed: 3589401
Define an attribute for high RSSI roam trigger threshold. STA is
expected to trigger roam if the current connected AP's RSSI gets above
this high RSSI threshold. STA's roam attempt on high RSSI threshold aims
to find candidates from other better Wi-Fi bands.
Change-Id: Ie0323ff990e2679fd9768d2242730f7369cdb64f
CRs-Fixed: 3586127
Add vendor attribute IDs QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ORIGINAL_BSSID,
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_CANDIDATE_BSSID, and
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ROAMED_BSSID for updating roaming AP
BSSID to user space to enable user space collecting the BSSID for
roaming issues.
Change-Id: I7e41762309740e4b705c58d9340ad20fb179172b
CRs-Fixed: 3582516
VDEV is moved to INIT state as part of link switch disconnect,
before set MAC address response is received, any disconnect
request on this VDEV will not be handled as VDEV is in INIT
state, if link switch is in progress then it will abort link
switch and starts link switch dequeue process.
If the new disconnect request is from userspace it will
increment the OSIF ops, but if link switch is on assoc VDEV
OSIF is notified to restore the adapter deflink as part of
link switch complete where it wait for all OSIF ops to
complete. This is a deadlock case where driver is waiting
for ops completion on same thread where ops is initiated.
To fix this issue, do not handle link switch dequeue on the
same thread, instead move the link switch state to abort
and when actual link switch thread comes it will flush from
serialization.
If userspace disconnect is not queued as VDEV is in INIT
state due to link switch, kernel won't be notified about
the disconnect as this notification is only done on assoc
VDEV and any further connect requests from supplicant gets
dropped in kernel saying already connected and supplicant
will immediately try disconnect which driver will again
drop as VDEV is in INIT state. To avoid this kernel-driver
out of sync, forcefully move VDEV to disconnecting state
and queue the disconnect request.
Change-Id: I116859601ebba21d44797e74e160b56532ef833c
CRs-Fixed: 3588936
Extend enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event to add MLD
MAC address, the number of links, and link info. Link info contains
ifindex and MAC address of each link of a non-AP MLD that was negotiated
in ML association.
CRs-Fixed: 3591427
Change-Id: I82adfc6a0c0cd31a2a322c09b25f93cfe9753343
Currently PM_LL_LT_SAP_MODE is not handled in policy manager.
With this change add support for PM_LL_LT_SAP_MODE in the policy
manager.
Change-Id: I7b893b04498957eb4a7e9f74c4b4395d4a823bf9
CRs-Fixed: 3536612
With MLO link removal, AP can remove a link that happens to be the assoc
link for a given Non-AP MLD. So far, the Non-AP MLD has been using the
assoc link to interact with other layers and make various decisions.
Change those behaviors on a case-by-case basis.
CRs-Fixed: 3577559
Change-Id: Iaa001bdd2571bce424a953caa3197a99a6f84180
QCA vendor extension is used for NDP setup. This defines the new
attributes QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES and
QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED to support GTKSA, IGTKSA,
and BIGTKSA for NDP setup.
Change-Id: Iddd9d0f88d1d5d66fd72dc158801ad16c14f39e2
CRs-Fixed: 3583158
After link switch, the assoc vdev and link vdev could change.
So once the link switch is complete, change the roam state to
DEINIT for the link vdevs
Change-Id: I3e583fc1cb5be8d17d8680dab96461b058740c0a
CRs-Fixed: 3581730
Send bridge partner details during peer create and peer
assoc. The partner of bridge peer are saved which are used later
during bridge peer create and assoc. Also add bridge peer partner
details while sending peer create and assoc on actual links.
CRs-Fixed: 3574656
Change-Id: I755614a131f6552ac28377d2c7648db4fd87b8df
Extend QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
attribute to support enum qca_wlan_vendor_opm_mode.
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE to configure inactivity
timeout and speculative wake interval in User defined optimized
power save mode.
Change-Id: I726ca91638e07fd1efae4921519bb6affc8b9c21
CRs-Fixed: 3567041
After successful connection with an AP, driver fills the struct
cfg80211_connect_resp_params and sends it to the kernel.
For an MLO connection, the link's mac address field in the struct
is updated by AP's mac address instead of link's self_mac address.
So, update the kernel struct properly, to avoid issues.
Change-Id: I4d1ea4ee3fe5272dd4e08c0edd22b1df5c7999a3
CRs-Fixed: 3579820
Current code supports CFG80211_MULTI_AKM_CONNECT_SUPPORT only for
v5.15 kernel.
Enable this feature support from kernelv6.0 by default.
Change-Id: Ie0d36c6e6d286a432bcaa99ee905858e70297ba1
CRs-Fixed: 3577264
When HOST based TWT is triggered from userspace, while disabling
congestion based TWT, disable/enable TWT may fail due to ongoing
roam operations in firmware. These changes return error code EBUSY
in failure case in vendor command context to userspace.
Change-Id: I3da64b6ea4dcf08cf80966cd7639d8945fe46417
CRs-Fixed: 3520189
Introduce following for link switch disconnect:
1) Connect request source.
2) Connect request reason.
If the set MAC address response for new link is successful, post
connection on new link and transition the link switch state to
connecting. If the status of connection is successful, update
the state to link switch complete or else directly go for
deserializing link switch command and posting response to FW.
Based on the final state of link switch at the time of sending
FW response, send the appropirate status of link switch and reset
the state of link switch to idle post FW notify.
Don't unlink BSS incase of failure in connection.
Don't indicate connect results to userspace.
As we are already in serialization due to link switch,
don't serialize/deserialize connection command if it
is due to link switch.
Incase of race condition between link switch connect and
userspace connect/disconnect always abort link switch connect.
Change-Id: Ie350b52021c36802b82d6cb5f6f441fe1bd10458
CRs-Fixed: 3556529
Introduce following for link switch disconnect:
1) Disconnect source.
2) Disconnect reason.
3) Link switch BIT in CM_ID to identify link switch request
Don't notify link switch disconnect to initiate disconnect on
other connect VDEV of MLO mgr.
Don't notify userspace if the disconnect request is due to
link switch.
Don't notify netdev to stop queues on link switch disconnect.
Don't flush any pending disconnect/connect request on complete
of link switch disconnect request.
Don't attempt to serialize/deserialize disconnect command
if it is a link switch command ID due to either disconnect request,
disconnect complete or disconnect request flush.
Before start of link switch set the VDEV flag as MLO link VDEV
to leverage the disconnect/connect checks for link VDEV and
restore the flag at the end of link switch. This will impact
when link switch on assoc VDEV is received for which initially
the flag is not set.
Check status of link switch disconnect done API to either
proceed further in link switch or terminate the link switch.
If any userspace disconnect and link switch disconnect race
condition, always abort link switch disconnect and notify
failure to FW.
Change-Id: I6ec2a850d49f5ec6df2ec868c290f19203cd8c88
CRs-Fixed: 3556481
1. APIs to check topology to see if the bridge vap/peer will be used.
2. API to check the max number of links supported.
Also check if we can have the primary and assoc links to be different
for WDS STATION. Based on the topology allow/block
connection to a particular AP.
CRs-Fixed: 3562149
Change-Id: Icf3b32036199f39b0d567ac88795dc07760ac1a5
Notify OSIF about each connected link once assoc VDEV connection
is completed, call the ops callback registered while filling
kernel data structure for each link.
Earlier post connection each VDEV's OSIF callback is called to notify
individually, but this leaves the OSIF unaware of standby link details
as the standby link doesn't have VDEV associated with it.
Change-Id: I027b91d02bdc4412400a7e66f11911da149e672b
CRs-Fixed: 3556378
After mlo connection is completed driver send the connect resp event
to kernel. As of now, driver gets the ML param info from the assoc_rsp IE.
For stand_by link, driver don't have vdev. Due to this, driver can't send the
stand_by info to kernel.
Fix is, instead of assoc_rsp IE driver will use mlo_mgr to get the links
information.
Change-Id: I8da762bed94de4ad2b024183c09b3d0a0f1b7ca4
CRs-Fixed: 3530712
Currently, We are using GET_STATION_INFO_REMOTE_CH_WIDTH
attribute for remote channel width which is using u8 for
storing the channel width info. However, for 320 MHz there
is a need to use u16 attribute to store the channel width
info.
This change is to preserve old interface and use new
interface to store u16 attribute for remote channel width.
Change-Id: I01eb246c380a6155d0d96032549eee53a877cb2a
CRs-Fixed: 3567663
Extend bitwise mask in enum qca_wlan_tdls_caps_features_supported to get
the TDLS wider bandwidth capability from the driver.
Change-Id: I7e7209f72c7d8db3ac06ecafdfe91deb7438e1b2
CRs-Fixed: 3552602
Currently, we are storing keys based on vdev object.
However, with n link mlo there is a need to store keys
based on psoc level.
This change is to store keys based on psoc level.
Change-Id: I457704ce40ed450516b0a99b4021b68df112a600
CRs-Fixed: 3565184
Introduced new macro CFG80211_PUNCTURING_SINGLE_NETDEV_API
to be used if we want to pass puncture bitmap as an argument
to kernel, else disable it.
Change-Id: I136e09d547bc14e57be5ee0b026a51f0d6e4a525
CRs-Fixed: 3487912
Currently in driver, two macros are defined to specify the
mac address printing format. Since both macros achieve
the same result, replace all instances of QDF_FULL_MAC_FMT
with QDF_MAC_ADDR_FMT.
Change-Id: I195448267ef8e77a7fd5b232ffbf2cfb0ded1be4
CRs-Fixed: 3559488
Currently crypto module is using wlan_cfg80211_translate_key
api to translate cfg80211 keys based on vdev level.
However, there is a need to translate cfg80211 keys
based on psoc level.
The change is to use wlan_cfg80211_translate_ml_sta_key
api to translate cfg80211 keys based on psoc level.
Change-Id: Id642dfb0b864f4351d9cac055ad268dfcd51ae88
CRs-Fixed: 3549391
In current scenario osif_cm_free_connect_req() and mlo_free_connect_ies()
used to free up connect request and its sub memory.
Similarly cm_free_connect_req() and cm_free_connect_req_param() also
free up the connect request and its sub memory.
So replace osif_cm_free_connect_req() with ucfg_cm_free_connect_req(),
mlo_free_connect_ies() and qdf_mem_free() with wlan_cm_free_connect_req()
and mlo_free_connect_ies() with wlan_cm_free_connect_req_param().
Change-Id: Ie62603652dd77ae5ae9f7b7085d4b9bb257eaf53
CRs-Fixed: 3554234
Define a new QCA vendor attribute to enable/disable trigger
based UL MU transmission.
Change-Id: Ide36ec4869dc462879a57ff9a1e06f9f48e5c8d0
CRs-Fixed: 3538865
Masking the MLO API, mlo_setup_get_total_socs
using ic_eht_target check for non-MLDs in cmn_dev.
CRs-Fixed: 3551482
Change-Id: I8d585f534146f58beee605b2165bb0c51fc5bdb9
Add support for per-MLO link configurations in
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Additionally, add documentation for
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: Id83912079b3a4876891ac48beb069b17d4b8ebbf
CRs-Fixed: 3540412
