Publish h264 decode level value with in the
supported level.
Change-Id: Id1cecdfda0336eec3fdba7ad994d2381351065c5
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
HLOS doesnot have access to raw region. Instead,
read from sw_range4 region which are sense
registers for raw region.
Change-Id: I662266b6557756d9bf6ef687f81b7869a792e7f7
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Add instance data for v1 and v2 sku's.
Change-Id: I13a03ebb55d2ccb9044ac667054fc3aadbd2977f
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Configure hbb value as '14' for lp4
ddr variant.
Change-Id: Id3fa3028f38dabb81d1b1fc5b117c6d10e4d45b5
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
Use maximum framerate from published
instance caps to make it platform
agnostic.
Change-Id: I319768e722774969287abb9e782ddbece7593ff9
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
[1] Disable MMRM if platform feature
does not support.
[2] Query for scaling support from
mmrm driver and enable/disable
based on queried support
accordingly.
Change-Id: I34cf9a9e150b0823828507e3f5d680aae6eb14d4
Signed-off-by: Priyanka Gujjula <quic_pgujjula@quicinc.com>
MIN_QUALITY is parent of BLUR_TYPES, hence prioritize MIN_QUALITY
control adjustment over BLUR_TYPES.
Change-Id: I8498760d7b3ecd1546c2be43d2ae945781d4a84d
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Currently, statistics is printing for every 2 second
And these delay is hardcoded.
So changes added to update the statistics delay from the command-line.
- adb shell "echo 200 > /d/msm_vidc/core/stats_delay_ms"
- adb shell cat /d/msm_vidc/core/stats_delay_ms
Use above command to update & read statistics delay.
Change-Id: I523a870203ee460d1dba8208b798f28253407e73
Signed-off-by: Gaviraju Doddabettahalli Bettegowda <gdoddabe@codeaurora.org>
add checks to limit max number of sessions supported based on
resolution.
max number of 720P sessions: 16
max number of 1080P sessions: 8
max number of 4K sessions: 4
max number of 8K sessions: 2
Change-Id: I2a784a0d28ba050923bdc7f42a21ee9801d01d86
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Allow one 8k + one 4k realtime sessions.
Maximum allow two 8K sessions which includes RT and NRT sessions.
Change-Id: I68acfc4942c5c930bed7d9584cd82f2667010136
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
add support for HFI_PROP_MAX_NUM_REORDER_FRAMES.
add ctrl for this metadata for avc and hevc.
Change-Id: I9a7b95f130e58f810255aff23e9b605304841072
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- Added change to print buffer statistics like total and avg
etb, ebd, ftb, fbd counts, client set fps, actual fps,
bitrate values in 1 sec window and these stats currently
configured to print at every 1sec boundary.
- Convert meta buffer prints to low level logs.
Change-Id: I1c93eea90fbd5460eb51bbf133c513157003d51e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Cap chroma qp offset value other than -12 as 0.
Change-Id: I0ca9c4844ab835a9365e695f38deff90768191aa
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Sequence change property would configure firmware to generate psc at every
key frame. This property is configured based on low latency settings from
the client.
For cases, when client sets low latency from 1 to 0, the hardware would
continue to run in direct mode (low latency mode). Since the sequence
change property gets disabled, there would not be psc from firmware to
change the mode to 2 stage. Hence the sequence change property to be reset
only during psc handling.
Change-Id: Ie8e17e44c921f036763f6f390397d4d812120e23
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
- make B and P frame QP controls as dynamic.
- enable I/P/B QP to fw as and when these
controls are set to the driver.
- remove HEIC qp support.
Change-Id: I7f45ab0bda75df8128bbbdfcebe66c2cae208b06
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
1. Calculate framerate based on buffer timestamp
2. If framerate changed and stable for 2 frames,
update it to firmware and in driver internally.
Change-Id: I7feda86dec8fcfc1dff6defac8c15a97c1b8393e
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Enable HFI_PROP_SECURE when secure session is enabled
in encoder. Same behaviour as Decoder.
Change-Id: I5edfe3d735fda8edea9e491ae17546945b4431a1
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
- To determine if session is admissible, check only the
decoder input width/height and encoder crop width/height.
- Update session MBPF Calculations.
- Amend work mode setting to consider decoder input width,
height and GOP size.
Change-Id: If4053c222de2a55ad5b85a8ab96c12c47b145aa3
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- misc fix for setting frame qp, min qp, max qp.
- seperate LEVEL database entry for encoder and
decoder as max level supported by encoder is 6_0,
but decoder supports upto 6_2.
Change-Id: Ia0a0a717e73e55a8b6933421e3eb55c3831524b2
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Encoder supports downscale with scaling ratio upto 1/8 of width
and 1/8 of height. So added necessary scaling checks at streamon.
Change-Id: I3a29b43c79cf4e693ba2c0d9f98ec24410d50fbd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add strict check in msm_vidc_check_mbpf_supported() to
reject image session, if total image load exceeds 16K.
Added msm_vidc_print_insts_info() support to print all
running instance info, if new session is rejected due
to mbpf/mbps checks.
Change-Id: I98bab985fcf4f4d20c6f263c48e0c701ec86ab6f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Decoder supports dynamic low latency. When client configures the
video session in low latency mode, driver would configure the
firmware such that HFI_CMD_SETTINGS_CHANGE is triggerred on
sync frame boundary.
Change-Id: Ie70eaaeb8ad420db926f0d99f77723476deee400
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
[1] Irrespective of layer encoding type P or B, always
caliberate gop size to have gop size multiple
of sub gop size.
[2] Do not cap enh layer count value to max 1 value when
cvp is disabled.
Change-Id: I10f602202ce007707c0fee76d9f847db70798754
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
min VBV delay value supported is changed from 100 to 200
in firmware. Pick up the change in driver.
Change-Id: I200bdd4c35aa463d64baee0fa2ca330dc1eb0ad2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
