To avoid memory leakage, clean children and firmware lists
at session close, error cases, and at the end of each usage.
Change-Id: I1eadbf81da207bd987c50428c0c7cf4967a8885f
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Modify cap values for below properties:
[1] VBV Dealy: default as 300, min as 100, and max as 300
[2] Peak bitrate: default as avg bitrate set by client.
Change-Id: Ic9533e8a40e789128e5baa975bf1a0355e373e08
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to calculate and print encode and decode
time, and average time consumption per fbd sample.
Change-Id: I5e867833d1d88285bfebc8c9b9a593e3ed975ed5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Increase max buffer count to release the buffers,
Change-Id: I34774a8e99c7a5c78f79e8ca101e6135a22e7f30
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Due to delayed unmap feature on decoder output buffers,
refcount will become one when no one uses the buffer
in driver. In release done functonality, remove the
buffer from maps list only if refcount equal to one.
If refcount is more than one indicates the buffer is
being used, so do not remove from maps list. There are
chances that same decoder output buffer might be queued
by the client in which case we are not supposed to
unmap it from maps list in release done.
Change-Id: I69250c3efa89d77055e89770fd441af1fb50b755
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
- subscribe for dpb list property in combined
mode on output port.
- copy dpb list property payload from fw to
static array.
- using this array, mark read_only list buffers
as non-reference if not part of array. if count
of such buffers is greater than output min count,
send to fw for release.
- once fw returns them, destroy these buffers.
- unmap stale output mappings due to lazy unmap feature.
- unify release internal functions into common function.
Change-Id: Id32f04efb19eecaff453cc4383ee8296a0246263
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Need to increase debug timeout incase more debug logs were
enabled. This is to avoid sync cmd timeout.
module_param_cb supports to register custom set/get callbacks.
So using this feature to increase various timeout values,
incase more logs were enabled.
Change-Id: I194c077c2ba00af2403d487a3dcfbb48f119b478
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Avoid adjusting, sanitizing, and setting mark and use ltr
controls to fw for input port static case.
Change-Id: I8ac7fd9537ff0c5ddce0ff0f4d0337cb19dd83d2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Account for V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
ctrl value to decide HFI_PROP_DECODE_ORDER_OUTPUT property value.
- Set encoder run time properties on raw port
- Some logging changes.
Change-Id: I5eef81b484e81b69031854a3a8665de4be7f98f9
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Handled below items as part of this change.
- print buffer_name instead of hex value.
- enable dcvs only for realtime sessions.
- enhanced max_input_data_size handling at
msm_vidc_scale_power.
Change-Id: If5ac810f4e020bee54364161596c5547af94161a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- add support to skip lazy unmapping for decoder
output buffers only. Map twice for these buffers.
- v4l2 client owned RO SMMU mapped buffers are
maintained separately in read_only list.
- For FBD with RO flag from fw, add buffer to read_only
list. Else remove from this list.
- During FTB, if buffer present in read_only list,
add RO flag to hfi buffer and queue to fw.
- During streamoff output, unmap all buffers except
those present in read_only list.
- During close, unmap completely and clean up read_only
list, output list.
Change-Id: Iacee7d298dfbff0b9cb6f17dff27ad98574b489b
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to deliver HFI_PROP_BUFFER_TAG via FTB metadata buffer
to receive HFI_PROP_DPB_TAG_LIST from fw via FBD metadata buffer.
Change-Id: Id9eeee26135379975f55923505d9c91905fa0b9e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Enable encoder input Compression Ratio (CR) stats.
Input CR stats are provided by clients for each input buffer
and used in bandwidth calculations.
Change-Id: Ibd910118837148b0b9dcc288069237f9a2d8f225
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- Add support for a new non-secure pix context bank.
- Remove usage of deprecated 'buffer-types' in context banks.
Change-Id: I3a21eb8ce1d9aff277568d54aadb54193ad0ce75
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- add DPB tag list capability in database
- subscribe in metadata mode for the dpb tag list
property if enabled
Change-Id: Id4b9b7392b7b26cccf0860d578b8a0cb8d798d04
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to set HFI_PROP_NAL_LENGTH_FIELD property to
video firmware.
Change-Id: I20db36bad394fe0b5163a156199340836af3f740
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
As per HFI_PROP_CODED_FRAMES details, 0x0 is field interlace,
0x1 is progressive and 0x2 is adaptive frame field bitstream.
Treat 0x1 as progressive and both 0x0 and 0x2 as interlace in
driver.
Change-Id: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
v4l2 enums for color space info are not one to one
mappings with hevc spec values. Hence, introduce and
use corresponding mapper functions.
Change-Id: I37a79a9b34b66184ece9a284ae98c9fa4efd248f
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Added smmu_fault_handler support and printing all buffers,
allocations, mappings list details as part of smmu fault
handling.
Change-Id: Idb5d28357f9fb885adf7ae16f328b4963c56aa8c
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- Set enc colorspace info to firmware via
HFI_PROP_SIGNAL_COLOR_INFO property.
- Fix dec colorspace payload packaging.
Change-Id: Ib7ef2395a4f98f6497bbb200770a8612410eb8f5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
[1] DRC_DRAIN_LAST_FLAG to DRC is not allowed. So remove support
[2] introduced in_range macro
[3] removed process_response_packet function
[4] introduced msm_vidc_process_pending_ipsc function.
Change-Id: I1bc7ed6f0d94052900a4655a2e3da9ea44d60143
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- Set dynamic flag in inst database to allow
dynamic setting of necessary controls.
- avoid enc qbuf call routed to dec.
Change-Id: I66cfcc6be86bfbfe237191a11d533ab6c9455f32
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
