As part of TX Mon 2.0, WIN has IEEE80211 specific macros only in WIN side
header file, but now Tx Mon 2.0 is required to be supported on MCC side
and these macros are not available. Hence extend by adding the required
type/subtype macros in qdf common header file.
Change-Id: I76cf0a0c226664c34c9c8bd10e280a500b3c61a9
CRs-Fixed: 3415715
Add a new vendor command QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE to
get the local packet capture status in the monitor mode. Add required
attributes to respond with status of the monitor mode. The monitor mode
can be started/configured by using the
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE subcommand.
Change-Id: I72edd46f85b545d7aecb3c704441e810db9ca711
CRs-Fixed: 3415711
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
Currently, MLO vdev flags(WLAN_VDEV_FEXT2_MLO and
WLAN_VDEV_FEXT2_MLO_STA_LINK) are set/get from both initial
connection and roaming. As there are no logs in the set/clear
APIs, it's difficult to track where it's set/cleared for debugging.
Add logs in set/clear APIs to indicate on which vdev the flags
are set/cleared.
Change-Id: I7bd2dcd10a58ec3c09c7fd7a52169a3fea236223
CRs-Fixed: 3467014
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
Update meta data version of Waikiki as it supports AOA
phase delta extraction now.
CRs-Fixed: 3462217
Change-Id: I909802417125ecafaf4d14466c349f0ed9b45fd2
Implement the data structures for DFS puncturing and
un-puncturing state machines. For details of state
machine implementation refer to the change id
I5accbf2866a830447bd776b989c31909060c45ca.
CRs-Fixed: 3462277
Change-Id: I026228fb72302408f2992325099a31a60e986e3c
For MBSSID, aid mgr is allocated twice in
few corner cases of VAP create.
This change adds check, if aid mgr is allocated
by legacy code in vap create, aid mgr allocation
would be skipped
Change-Id: Ie44fab12badb5c9487ce3de333376e1885e727d0
CRs-Fixed: 3461883
1. Start response is received for vdev-0 and continues processing
mlo_sync_complete for partner vdevs holding ap_ctx lock and waiting
on vdev_sm lock of partner vdev
2. During which one of the partner vdev completes CAC_WAIT and continues
processing mlo_sync_complete holding vdev_sm lock and
waiting on ap_ctx lock. This scenario is resulting in RCU_STALL.
The last vdev in MLD to receive start response is responsible for
dispatching MLO_SYNC_COMPLETE event all the partner vdevs and then to self
If vdev_up_bmap is set, then return.
Change-Id: I5ae7146eeba5154331f442f9987593044bde76b4
CRs-Fixed: 3457019
Following sequence of events results in a deadlock.
1.When channel change is in progress on channel 100.
In mlme_ext_vap_start_response_event_handler(),
wlan_vdev_mlme_sm_deliver_evt takes a mlme_vdev_sm_spin_lock
while posting WLAN_VDEV_SM_EV_RESTART_RESP event.
2.This mlme_vdev_sm_spin_lock is released only after
the RESTART RESPONSE action is completed. Restart response action
calls mlme_vdev_start_continue_cb() where
iv_enable_radar_table() is invoked. [[SM SPIN LOCK ACQUIRED]]
3.iv_enable_radar_table() = ol_ath_enable_radar_table.
This invokes ol_ath_init_and_enable_radar_table() where
dfs_get_radars() is invoked. This calls dfs_get_po_radars()
where WLAN_DFS_DATA_STRUCT_LOCK() is tried to be acquired.
4.However, acquisition of WLAN_DFS_DATA_STRUCT_LOCK() fails in (3)
because the lock is held by another thread mentioned in (5).
[[WAITING FOR DFS LOCK AS DFS TASK HAS ALREADY ACQUIRED]]
5.While AP is in START Response action detailed in (2),
there is a radar event received and dfs_task acquires
WLAN_DFS_DATA_STRUCT_LOCK. This lock is held till
VDEV RESTART is posted. [[DFS LOCK ACQUIRED]]
a. Dfs_task
b. dfs_process_radarevent
c. dfs_radar_found_action
d. dfs_radarfound_action_generic
e. dfs_process_radar_ind
f. dfs_process_radar_ind_on_home_chan
g. mlme_dfs_mark_dfs
h. ieee80211_mark_dfs
i. ieee80211_dfs_action
j. wlan_pdev_mlme_vdev_sm_notify_radar_ind
k. mlme_vdev_sm_radar_notify
l. wlan_vdev_mlme_sm_deliver_evt()
[[WAITING FOR SM SPIN LOCK WHICH IS ALREADY ACQUIRED IN (2)]]
Fix: To acquire WLAN_DFS_DATA_STRUCT_LOCK lock only around
dfs_process_each_radarevent() where the radar filter tables
/ radar queues/ delay lines are manipulated and release once
dfs_process_each_radarevent() is completed.
dfs_radar_found_action() which changes channel after radar
need not be protected by the DFS_DATA_STRUCT_LOCK.
Change-Id: I308f96d77c4e2e28f2ba1ec55f363202a8c25fe8
CRs-Fixed: 3403824
variable is not defined leading to compilation
issue when vlan is enable in SDX.
Fix is to correct the variable name.
Change-Id: I2d3618d9ad3d8a48026cb8c737ce6ede733cb478
CRs-Fixed: 3462236
Update the Umac reset state machine before sending the command
to firmware as we might get the response from firmware even
before the state is updated.
Change-Id: I3ca2560d91c39d34e7efe156521c2ba5114a7536
CRs-Fixed: 3462821
Record hardware TX descriptor history during TX enqueue for WCN6450
(Rhine hardware). This will aid in debugging data path issues.
Change-Id: I99c2a88ca161f89d529cba92692811fadee28938
CRs-Fixed: 3462090
Add RX debug history support and first packet marking
after WOW for RHINE architecture based RX path.
Change-Id: Ife719bdc3e5031a63b3f97c5842a220caeda8ffd
CRs-Fixed: 3452940
Add if_mgr support to handle STA CSA complete notification and
SAP CSA Started and complete notification.
Before CSA vdev restart on SAP side, disable TDLS off channel.
After CSA, check if TDLS is allowed for the current concurrency
and take action accordingly.
Change-Id: Icbadb898f5b468717f74f92a0993c05b59719205
CRs-Fixed: 3445113
Per new design, FW will use HTT_MSDU_QTYPE_USER_SPECIFIED instead of
HTT_MSDU_QTYPE_LATENCY_TOLERANT for TX ILP support judgement,
change it in host part accordingly.
Change-Id: I0318801c4fe11ca623a99459d9f6820acb1c8fea
CRs-Fixed: 3462232
On some third-party platforms, we observe the memory physical
address below 0x2000 is allocated will cause HW/FW NOC error,
so this region memory should not use by host.
This change will hold the memory if the allocated memory physical
address below 0x2000 until driver unload.
Change-Id: I9d5df20cbdf23c230d7c910cce9b9489dd9dd614
CRs-Fixed: 3419648
On txrx_stats 260, wdi event stats are displayed with content as zero.
Which need to be displayed only on non zero value.
Change-Id: I5ad4595e35e977dd141584c92cdc164e153b7c0f
CRs-Fixed: 3454039
In the LPM case, if the tx desc has been force
freed in the dp_bus_suspend ->dp_find_missing_tx_comp,
then after data transfer resumed, fw may report
tx complete for the same tx desc, and we should
skip it to avoid null pointer access.
The reason why set default vdev_id to 0xff is:
Since in this case, it happned disconnect before
suspend, so the tx desc pool will be deleted and
reinitalized when resume, so the pdev is null in
the force freed tx_desc and vdev_id should be changed
from 0 to DP_INVALID_VDEV_ID, otherwise the below logic
in the tx complete handler will not skip handling
this freed tx_desc.
if (qdf_unlikely((tx_desc->vdev_id == DP_INVALID_VDEV_ID) &&
!tx_desc->flags)) {
DP_STATS_INC(soc, tx.tx_comp_exception,1);
dp_tx_desc_check_corruption(tx_desc);
continue;
}
Change-Id: I5f3ff6fd783893f92a0fd6b3db7457b280fcb1c8
CRs-Fixed: 3447465
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
Some IOT APs only allow to connect if last 3 bytes of
BSSID and self MAC is same. They create a new bssid on
receiving unicast probe/auth req from STA and allow STA to
connect to this matching BSSID only. So boost the matching BSSID
to try to connect to this BSSID.
And add logic to refresh the candidate list before next
candidate try when the last candidate connect fail.
Change-Id: I482e122c8c9febbab42f64013fbb78c266f49655
CRs-Fixed: 3432618
This reverts Change-Id: I2c19b72b82092d553d474a50385ed3095a0fab39
since it results in increased memory allocation due to 8 bytes of
headroom at the beginning of buffer, particularly for data path modules
when size is at the edge of the page boundary.
Change-Id: I72fd7e63b93f2646812acc09e817e3be531f27d8
CRs-Fixed: 3458603
Add support for 4 byte TLV tags for platforms like peach for which we
have 4 byts TLV tags.
Change-Id: Iebf48a6992c21246df3fb813b5d6ae418311f062
CRs-Fixed: 3460205
Currently we only support DBDC with IPA, to support
TBTC we need to provide pipe setup for third WKK
radio to IPA, so that IPA can register the pipes
in wlan2 smmu context bank for third WKK radio.
Change-Id: I941c0ddec4f23406aa5acabbfb80a7499d830d75
CRs-Fixed: 3456002
As we are using index_look_up_overwrite field in TX
descriptor with WDS_EXT need to reset this field in
FAST TX API even in AP mode
Change-Id: I6027a2d99be715973af5f8091755f0a4a9256010
CRs-Fixed: 3450922
Fix intraBSS MCAST traffic issue between legacy and MLO
clients. Fix includes below changes
1. Change get_mcast_primary_vdev to return correct value
in case current VDEV is mcast primary
2. Avoid checking vdev->mlo_dev as it is set only for
mcast primary VDEV
3. In intraBSS ucast case use destination SOC to get the
destination peer with da_peer_id
Change-Id: I0d7a890bc62f703cd92e7c9edc20768a9a487d06
CRs-Fixed: 3456458
As IPA has moved out of the kernel, ipa_uc_reg_rdyCB
interface call from WLAN is not needed anymore
as ipa_wdi_init_per_inst() initialization call will
handle this. This change will add support to retain
this call only for legacy devices.
Change-Id: Icb479562e091d388e03ef5a38b3e95d4dbf06271
CRs-Fixed: 3459071
The kernel-doc script has identified a couple of documentation issues
in pktlog_ac_api.h, so fix them to the best of our ability.
Change-Id: If5db73e7d019def46d0ba71fb0b01fe4327a521a
CRs-Fixed: 3451053
In outdoor deployment, when the target sends STOP_TX event, the 6 GHz
AP continues to beacon in the SP power mode, without bringing down the VAP.
In mlme_check_curchan_and_set_ap_pwr_type, since the
afc_power_event_received flag is cleared and set to false during STOP_TX,
the API wlan_reg_get_best_pwr_mode returns LPI as the best power mode.
When LPI is given as input to wlan_reg_set_ap_pwr_and_update_chan_list,
it returns an error as LPI rules are absent in the pdev
(outdoor deployment). But the error status is not handled. Current channel
list also is not updated with the AFC_NOT_FLAG. When the channel list is
sent to the hostapd, NO_IR flag is set based on the presence of the
AFC_NOT_DONE flag in the current channel list. As a result NO_IR flag is
not sent to the hostapd, and the VAP remains in the up state.
To fix this issue, in reg_get_best_pwr_mode_from_eirp_list, skip the
unsupported modes (in this case LPI and VLP), from best power mode
computation. Also, in reg_get_sp_eirp, return the SP EIRP when no rules
other than SP are available.
Also, rename reg_get_eirp_for_non_sp to reg_get_eirp_from_mas_chan_list.
Modify reg_get_sp_eirp to call reg_get_eirp_from_mas_chan_list when
CONFIG_AFC_SUPPORT is not defined.
Change-Id: I1b11bf0580ec6af09ee8f9827bc85fae7930e414
CRs-Fixed: 3436245
Increase the DBR ring to support DBR module
DBR_MODULE_CBF standalone sounding CV data
for QCA5332 target.
Change-Id: I4ab0741d92c7c7a32243173c87d022befa702399
CRs-Fixed: 3456418
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
Add gActionOUIDisableDynamicQosNullTxRate to control FW's dynamic qos
null tx rate feature.
Some APs sometimes don't honor Qos null frames with some specific rate.
This ini will disable dynamic qos null tx rate feature for specified
APs.
Change-Id: I7f76d19be6f4714166bf5761b43c7c9c7d041308
CRs-Fixed: 3451330
Add new params(ul_tid_bitmap & dl_tid_bitmap) for rTWT invite sta cmd.
This will be sent from test command to trigger invite sta.
Change-Id: I843badeb5e826ded5ab4f8083448b2b7fc4c3486
CRs-Fixed: 3456956
In Linux kernel 5.5, commit 43756e347f21 ("scripts/kernel-doc: Add
support for named variable macro arguments") improved how named
variable macro arguments are handled, and changed how they are
documented in kerneldoc comments from "@param...", to "@param",
deprecating the old syntax.
In Linux kernel 6.3, commit 3bdd9f075f54 ("scripts: kernel-doc: Remove
workaround for @param... syntax") removed support for the old syntax.
Currently the dfs_log() documentation uses the old syntax, so update
the documentation to use the new syntax.
Change-Id: I1aa44cd36ffacb0b26ee279496fc5a99b8de371d
CRs-Fixed: 3451492
