ucfg_scan_cancel currently grabs a vdev reference unconditionally. This
opens the possibility of operating on a destroyed vdev. Instead, try to
get a vdev reference, and abort the scan cancel operation if a reference
cannot be obtained.
Change-Id: I6380775c6cd09920ad70feed0ec67e4c85ba890d
CRs-Fixed: 2149645
Currently driver assigns WLAN_PMF_REQUIRED to AP pmf capability
even if rsn capability do not matches with RSN_CAP_MFP_REQUIRED.
Add check for rsn capability against RSN_CAP_MFP_REQUIRED to fix
this issue.
Change-Id: Iff51090c9a65fd7c0d45048b73c5383d56bb13a5
CRs-Fixed: 2146881
In coex mode, BT throughput test cases are getting effected as
driver is selecting non-DBS scan policy for directed scan requests.
FW is going to use only one MAC for scan when performing non-DBS
scan which inturn increases the total scan duration.
This increase in total scan duration has effect on BT throughput
test cases.
Select DBS scan policy if atleast one session is in connected
state.
CRs-Fixed: 2084608
Change-Id: I6fba26accbaed4d57c6c56a782e570b534af43c4
Update dbs scan policy as HDD_SCAN_DBS_POLICY_FORCE_NONDBS if
the scan request is for directed SSID or directed BSSID.
CRs-Fixed: 2084612
Change-Id: I9d720770e2e364ca5cb01bb5fe137f7248593398
Add user configuration parameters to configure the number of
probes in scan request and probe repeate time during scan
Change-Id: I65a3734d8080d8adfe3e9ffa26905e6adc196197
CRs-Fixed: 2071697
For FT_PSK connection, we use WLAN_AKM_FT_IEEE8021X to make the
security match which causes can't find the candidate AP, the fix
is to use WLAN_AKM_FT_PSK instead.
Change-Id: Ic11fa8e47ccee04621e3bb9491f138c425c91cee
CRs-Fixed: 2131598
For passive scan host expects dpp public action frames which
are broadcast. So set 3rd bit of scan_ctrl_flags_ext to 1, so
that firmware sends these frames to host upon passive scan.
Change-Id: I7ab70ef92d9226fc265e99f3d1196c5ebae6acb4
CRs-Fixed: 2124683
Adds support to enable/disable scans for the psoc.
Also adds API to set and get the scan enable/disable status.
Change-Id: I2ebb6f9c7fffabef90e9f8c461bdf735e95f0db3
CRs-Fixed: 2124783
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.
Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
Host driver forece fully frees scan requests in below cases:
1. vdev being deleted
2. command timed out
In above cases scan request is freed and scan module
posts scan cancelled event internally to registered handlers.
Drop any event received after scan is cancelled.
Change-Id: Id66b6cc6a400916af9bfaf0c09dbb92d7f27db4e
CRs-Fixed: 2123090
qcacld-2.0 to qca-wifi-host-cmn propagation
If no SSID are passed to NL80211_CMD_START_SCHED_SCAN cmd,
interface spec requires that an active scan is not needed.
Therefore a passive scan is now requested by cfg80211_sched_scan_request
for this case.
Change-Id: I1b1b9232ffb9d8d5c0bc9a1d75145d39c9fe9e6b
CRs-Fixed: 902092
Best candidate at first connection is a mechanism
to select best possible candidate for making Wi-Fi
connection based on the scan results provided.
Driver use Scan results to calculate score for each
BSS and select the best candidate to connect.
This enhances the user experience by connection
to better AP, based on certain parameters.
Change-Id: Iebb4ce009b23cae8ad7cbff83628e01633bbf3fe
CRs-Fixed: 2018585
Get the MAWC based NLO parameters from HDD/UMAC and pass them to
firmware via target/if
Change-Id: I76d7c8677ee73f9a3c54b7af4943b74a6b23323d
CRs-Fixed: 2064837
qcacld-2.0 to qcacmn propagation
Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.
Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
In Repeater AP scenario, when STA vap starts scan, it calls this
registered DFS callback function to get the AP CAC status. If the
AP vap is performing CAC, STA vap does not start SCAN.
Change-Id: Ifa3ad0298f1b04f3fffc915f20ff81ec0cc731bf
CRs-Fixed: 2096259
Add timestamp parameter in scan event received from FW to aid
in calculating dwell time and overall channel switch time in
off-channel operations.
Enable foreign channel exit event inorder to be notified
by FW through the scan event.
Change-Id: I4ba028756ee7db35f6528c0554b09c73087184a7
CRs-Fixed: 2056330
In SAP+STA case the min rest time is 50 and thus during scan
possibility increases that the device is not present in base channel
during the time of beacon transmission and thus beacons are not
transmitted.
Thus if SAP is present the min rest time should be 100ms
max rest time), so that during scan device can come to base channel
and transmit beacons.
Change-Id: I6fa2ee57771d093fce7d63089797528f8f4bc409
CRs-Fixed: 2079803
Add changes to match FILS realm info present in FILS indication IE
with the connection info.
Change-Id: I1ed6081f3320ecee8f86f7d87597b343230923b3
CRs-Fixed: 2093637
Initialize average rssi with instantaneous rssi in
util_scan_unpack_beacon_frame intead of marking it as
DUMMY.
Change-Id: Ie2fd577feeb46d61915c6974d8c627acb31e8b81
CRs-Fixed: 2096979
D1.3 defines the IE Id, Length and IE ID Extension for HE CAP and HE OP.
Host changes to accommodate them.
Change-Id: Idc3848b5486d05807cdc2ca3fb45ac493243558e
CRs-fixed: 2095550
Few OEMs want DBS to be disabled for connections while
keeping DBS scan enabled.
Few OEMs want advance DBS scan features to be disabled.
Provide different value to gDualMacFeatureDisable INI item
to achive the goal.
Change-Id: Iddf5df23575a2f907bb8dbd0c37e03ff4ebbdea8
CRs-Fixed: 2068779
qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
Average RSSI calculation was incorrect as previous average was
not considered. Consider previous average along with new frames
raw RSSI while calculating average RSSI.
Change-Id: I529802baaf296fc1378a1e89fc0ac00dcc8336da
CRs-Fixed: 2087711
This change adds scan_ctrl_flags_ext to scan command
to support DBS Scan selection policy.
Change-Id: I71727259c0b5984cfc8fd6157ed0066d3cd9b193
CRs-Fixed: 2061031
Increase the scan ageing timer value from 30 seconds
to 90 seconds for the initializer
SCAN_CACHE_AGING_TIME
Change-Id: I0131ab601de9c86b89449bddd721ac857862a5b5
CRs-Fixed: 2072461
Remove vdev/peer locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: I9972d51dfd1a42bdedbfd0fd4e67af03d030a1f5
CRs-Fixed: 2060880
Remove psoc/pdev locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: Ib5769c2234c8d57f485c0eef5a4e3c61fa170508
CRs-Fixed: 2060880
If AP was configured in WEP mode the scan module is not able to filter
the AP and thus connection fails.
Fix the logic due to which the AP was not filtered.
Change-Id: I03ee702875e867986e4bae635269a844914c8043
CRs-Fixed: 2057585
Components are required to provide flush callback to scheduler which
gets invoked for all pending commands in scheduler queue when scheduler
thread is going down.
Added flush callback for scan so that command cleanup can be done.
Change-Id: I990a5e14db1498e13a2eeeaa605b44593b8442f1
CRs-Fixed: 2056542
For Network Listen Offload and Perfered Network Offload, the fast scan
period is multiplied by scan_backoff_multiplier after max cycles have
occurred. Expose scan_backoff_multiplier to consumers of the WMI API,
so this parameter can be configured.
Change-Id: I478fb61cd096d3496205f4ff556e180dabf99b77
CRs-Fixed: 2035201
Scan command timeout value is 30secs and scan
cancel sync waiting time is 5sec due to this
in failure scenario scan timeout callback is
getting triggered very late and causing crash
in HDD.
Increase scan cancel sync timeout value equal to
scan command timeout value.
Change-Id: I7b98d26ac5d97039714a431030e47c463d3a670e
CRs-Fixed: 2048167
