Cleanup peer id from the callers of cdp APIs from
where the peer ID was passed, and use mac address
instead to identify the STA.
Change-Id: Ie6dcae77e959439a71c11b1a2fa0daddcaa6e719
CRs-Fixed: 2529822
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
Move the vdev response timer from the vdev object structure
to the psoc mlme structure.
Change-Id: I1df253331ddbd5538066ee93bc3e45b703057818
CRs-Fixed: 2563383
In the present implementation, it is observed that "SETROAMSCANCONTROL 0"
command is not clearing STATIC channels in the firmware for ROAM scan list.
So to clear STATIC channels configured for ROAM scan and set dynamically
added ROAM scan channels host sends two RSO commands to Firmware.
In the first RSO command STATIC channel list is cleared and second RSO
command will add dynamically added ROAM scan channels to ROAM scan list
in firmware.
Change-Id: Ic359326032c5776540c773a51d7531c0cfcd7bdc
CRs-Fixed: 2571119
Currently control path handles of pdev/vdev/peer
are given as arguments to cdp ops, which are
directly accessed by dp layer. This can cause a
race-condition in access of the handle if it
has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the psoc handle which can be accessed all over
to retrieve objmgr_pdev from psoc.
- rx_mic_error
- txrx_pdev_attach
- txrx_vdev_attach
- txrx_peer_create
Change-Id: Iaec8b913810f9035faa0010117cdff19bdded37f
CRs-Fixed: 2541431
Since there is change in FW and doesn't provide rx chaimask 2G on phy0
and rx chainmask 5G on phy1, so add this change to get rx chainmask
2g/5g based on mac phy capability.
Change-Id: I99d5f21c7a8033adc75f3b21e3b486628da3a40f
CRs-Fixed: 2574148
Host configures number of TIDs supported by in WMI_RESOURCE_CONFIG
command.
Firmware supports 8 TIDs per peer, with the existing formula to
calculate num_tids_supported i.e. 2 * (no_of_peers_supported is 32 +
num_vdevs is 4 + 2) firmware can allocate max 76 TIDs. As 76 TIDs are
not enough to serve 32 peers, as a new peer requests to allocate TID
after 76th TID, firmware crash is observed.
example as, SAP is running in DUT and 7 clients are conneted, connect
DUT STA to AP. Here total number of peers are 10 and required TIDs 80
i.e number of peers(10) * TIDs per peer(8) = 80, which exceeds limit of
76 number of TIDs configured at the initialization.
Hence, Host enlages the number of TIDs supported for Low Latency targets
i.e. USB or SDIO based solutions. Host calculates max number of TIDs
supported as follows,
num_tids_supported = (8 * no_of_peers_supported + num_vdevs + 2)
Change-Id: I024e03e4ac46f8118da544889de3ffd7cc67a1b4
CRs-Fixed: 2573130
The current function doesn't handle "hw_mode" parameter.
And if band is specified the function needs to find the
correct "phy cap" in mac_phy_cap list.
The "supported_bands" can be a bit mask of
(WLAN_2G_CAPABILITY | WLAN_5G_CAPABILITY), use "&" to find
the phy cap of requested band.
Remove unused API wma_get_phyid_for_given_band.
Change-Id: I4b120d681b820e2a6e2b82f33d67fbcf6136af09
CRs-Fixed: 2571400
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
Self-peer holds a reference to the vdev object. As part
of new changes to send vdev delete to firmware as part
of vdev delete notification, the self peer reference needs
to be released 1st before sending the vdev delete to firmware.
Hence detach the peer deletion from the vdev deletion.
Change-Id: I8169fdd6cc6acadea9a89baf38bd273797e8bc9b
CRs-Fixed: 2565315
Use "CDS_BAND_2GHZ" to get 2G vht phy capabilities.
Also use "total_mac_phy_cnt" to enumerate mac_phy_cap
list to get correct 2G phy caps.
Change-Id: Ibced9b07370932b65a35f43aa579b3c28ea6e23b
CRs-Fixed: 2568539
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- ipa_get_resource
- ipa_set_doorbell_paddr
- ipa_set_active
- ipa_register_op_cb
- ipa_get_stat
- ipa_tx_data_frame
- ipa_uc_get_share_stats
- ipa_uc_set_quota
- ipa_enable_autonomy
- ipa_disable_autonomy
- ipa_setup
- ipa_enable_pipes
- ipa_disable_pipes
- ipa_rx_intrabss_fwd
Change-Id: I678d7a7de7132417ff6051b0fd6da5d14426d21e
CRs-Fixed: 2540861
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539735
Change-Id: I2baad09fde29d439ae2099e01e4e68ed6b94196d
Remove legacy usage of channels in WMA layer and
use frequencies instead to incorporate 6ghz
frequencies as well.
Change-Id: Iba4a9ea723d5c03a4deeaffc5fbdf628f435eb67
CRs-Fixed: 2563924
The driver does not check the device DBS capability
and the DBS ini compatibility( ch select policy)
If the DBS ini channel_select_logic_conc is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I629fd8661f70b64808a55c4c9bdafa9608787b09
CRs-Fixed: 2551648
The driver does not check the device DBS capability
and the DBS ini compatibility.
If the DBS ini gDualMacFeatureDisable is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I2b31453f9c8a04cef7f943b30d3c28f844c276b5
CRs-Fixed: 2551644
wma_print_wow_stats does not do null validation for pointer vdev
returned from call to function wlan_objmgr_get_vdev_by_id_from_psoc
which can lead to null pointer derefrence.
Add NULL pointer check for vdev in wma_print_wow_stats.
Change-Id: I4fae47b303436bf9f2a4768995cea7640bc6feab
CRs-Fixed: 2564073
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged l_flowctl_ops
- register_tx_flow_control
- set_vdev_tx_desc_limit
- set_vdev_os_queue_status
- deregister_tx_flow_control_cb
- flow_control_cb
- get_tx_resource
- ll_set_tx_pause_q_depth
- vdev_flush
- vdev_pause
- vdev_unpause
CRs-Fixed: 2539748
Change-Id: I8ad4a20914c654b8e8aaf629dda7f673fdb110e4
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged throttle_ops
- throttle_init_period
- throttle_set_level
CRs-Fixed: 2539744
Change-Id: I0e1339ead92d66463d3b58ed9268c7194fd2bd27
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged delay_ops
- tx_delay
- tx_delay_hist
- tx_packet_count
- tx_set_compute_interval
CRs-Fixed: 2539742
Change-Id: I201d343f4ced3b861a65ddf78e10e66f786e5e91
Currently the FW expects the flag of
scan chan cmd to be set if the max BW
is filled for all the channels, which
is not set by driver.
Fix is to set the flag's 2 bit to allow
FW to use the max chanel BW.
Change-Id: I6240b8ae2f0c7389c43dd310d894a35411503d6e
CRs-Fixed: 2550431
Presently as part of the vdev creation the self peer for the vdev
is created in the object manager and in the firmware. The self
peer creation in the object manager needs the vdev to be in the
created state. As part of new changes to send the vdev create to
firmware as part of the vdev creation notification there will be
failure in creating in the self peer.
Hence, drive the self peer creation from the SME layer which will
create the vdev.
Change-Id: I0875f4ec5bd96438c0f21056e1d6920d3be2a177
CRs-Fixed: 2555868
1) Change hdd_parse_plm_cmd's code to populate frequency
list instead of channel ID list into struct
plm_req_params.
2) Use frequencies instead of channel IDs in the following
APIs' parameter/code:
sme_set_plm_request
csr_is_supported_channel
3) Stop populating channel freq list in function
wma_plm_start, as the frequency list will be included
in struct plm_req_params automatically.
Change-Id: I6704752317248ac4cfe800629d777f4a127e7be7
CRs-Fixed: 2560088
In non concurrency scenario with TDLS Offchan link, FW is sending
two pauses namely PAUSE_TYPE_CHOP and PAUSE_TYPE_CHOP_TDLS_OFFCHAN
back to back when DUT dwells between TDLS Off channel and AP channel
respectively. HOST handles these events as vdev based event instead
of peer based event and remove all the tx queues from scheduler for
all the peer irrespective of the pause type. This will lead to data
stall in TDLS offchan scenarios, as at any point of time, host will
be receiving one of the two pauses and keep its peer queues out of
scheduler.
Changes are done to decouple the handling of pause/unpause events
for TDLS peers with Offchan enabled from vdev based pause/unpause.
TDLS peers will be paused/unpaused based on PAUSE_TYPE_CHOP_TDLS_OFFCHAN
pause type. Other pause/unpause events will be handled as usual.
Change-Id: Iccb46fd6d121d5df6d53633c9978ddc8e02f588f
CRs-Fixed: 2558612
Modify the following API's code and parameters to make
sure it is using frequency instead of channel ID:
sme_get_connected_roaming_vdev_band
Change enum band_info band field in struct set_pcl_req
to uint32_t band_mask
Change-Id: I8ad6fc2676c2306043aa9415eefb2b89d8c49a4d
CRs-Fixed: 2555041
As FW required, send WMI_PDEV_DFS_PHYERR_OFFLOAD_DISABLE_CMDID when there
is no beaconing session in DFS channel for FW which supports dfs offload.
Change-Id: Ib3c24758b81d6218d2504729d44cdbfb122933ee
CRs-Fixed: 2544846
Do not start motion detection if baselining is not done, or motion
detection config values are not available
CRs-Fixed: 2547648
Change-Id: I23a02dbd21e2b673e625938a35003f3730135327
Populate HE 160MHz mcs map only from 5G band mac-phy capabilities.
Session bandwith is checked to disable HE mcs for 160MHz, but session
bandwidth is updated after the MCS is disabled. Update HE 160MHz
MCS map after session bandwidth is derived.
Change-Id: I94813ae269856b34cf1ea6c6a13013738909c674
CRs-Fixed: 2556457
Newly introduced WMI macro for group management cipher suite is:
WMI_CIPHER_BIP_GMAC_256 0xf
Currently, host updates the localy defined macro for group
management cipher suite to the firmware only as part of RSO
commands over the WMI_AP_PROFILE command. Host should update
group management cipher suite as per WMI cipher macro.
Fix is to update the group management cipher suite in RSO cmd
as per WMI cipher macro.
Change-Id: I81dc5e800c55d1eb6cd0447265205d3413b29177
CRs-Fixed: 2547507
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement.
Change-Id: I583059190827c9aed8d8089412a4cfac92ddf4c9
CRs-Fixed: 2554859
Vdev start/stop/delete events have been registered in
target_if_vdev_mgr_wmi_event_register in MCL/WIN common code.
Change MACRO name SERIALIZE_VDEV_RESP_TIMER to
SERIALIZE_VDEV_RESP.
Change-Id: I4d54a4755d7311b488f12f46a73db7e4645a4e0b
CRs-Fixed: 2554732
This change is to support 11ax linkspeed rate
on UI.
It supports different config for gReportMaxLinkSpeed.
Current 11ax rate support to max 80 nss2 mcs11.
Change-Id: Iff8cbafe1354ab50c4b3a90ef8ab698a3350a21d
CRs-Fixed: 2529291
Update SME/CSR for using channel frequency in STA connection
params and handle 6G AP IEs for association.
Change-Id: I1725223b6763a729762b604c850c9b493f739ae6
CRs-fixed: 2552009
Fill the pfm info of the TDLS peer before sending the peer assoc
command to FW.
Change-Id: I4e336c345c0fb8f063157b3e3a780efa777f1a74
CRs-Fixed: 2535832
WMA_SET_PER_ROAM_CONFIG_CMD is dependent on
FEATURE_WLAN_EXTSCAN macro. By default
FEATURE_WLAN_EXTSCAN is disabled and thus
WMA_SET_PER_ROAM_CONFIG_CMD is not handled
To avoid conditional Handling of WMA_SET_PER_ROAM_CONFIG_CMD,
Move WMA_SET_PER_ROAM_CONFIG_CMD out of flag
FEATURE_WLAN_EXTSCAN.
Change-Id: I4574efa2ccc968ead71a9c6d54845f7bd3057e56
CRs-Fixed: 2549779
With des_chan->ch_phymode already having the chanmode value,
remove chanmode from from struct wma_txrx_node to use common
des_chan->ch_phymode
Change-Id: Ib34a032b541367305a9fdba998ed6a00073ac9aa
CRs-Fixed: 2550440
Remove sta index references in TDLS structures and APIs
and mac address would be used instead to refer the peer.
Change-Id: I861f7ce068f3f545598129b9f3955b84b2a6fbce
CRs-Fixed: 2524512
Remove sta index references in lim since mac address
would be used instead of this index as part of the
sta index cleanup.
Change-Id: Ia7cbb94cf988a04506440ddaca6b1c302e13e852
CRs-Fixed: 2524509
Remove usage of cdp APIs to fetch local id and cleanup
few sta index references in wma and lim.
Change-Id: I32633ef7491b3b91ee55dd813a009c4d8010a3f5
CRs-Fixed: 2524506
Remove sta index in few prints and replace it
with MAC address as part of sta_index cleanup.
Change-Id: I689ede9dc345667f1a054f76bf3d08b236131c13
CRs-Fixed: 2524505
