Currently while attaching vdev to DP interface
we are searching DP interface based on the Adapter
MAC address, but if STA MLD and Link address is
same, we were getting the Link Interface instead of
MLD interface, which was causing the EAPOL packet to drop.
To Fix the issue, instead of searching for DP interface
based on MAC address, use netdev to search DP interface.
Change-Id: I50c7974c053717b496fab0eeb89774af382b4313
CRs-Fixed: 3258684
Fix stack frame size warnings during compilation for
tdls_get_6g_pwr_for_power_type and
tdls_is_6g_freq_allowed.
Change-Id: Ic9ca3c3db33acd769720bfcb8a754f8d6e6492ab
CRs-Fixed: 3249672
Currently in packet capture, channel is updated from connection
manager. Connection manager channel is updated only after
roam is done, because of which for EAPOL tx packets old
connection freq is filled during roam from one AP to other.
So we are seeing previous AP freq in EAPOL tx packets
captured during roam.
So to avoid this fill freq in data tx packets from pdev
which will get update when auth frame is received.
Change-Id: I251c4dd084b459b7c85e80c5f7ad717d561c09ae
CRs-Fixed: 3248305
Currently, host driver supports random mac for tx mgmt frames
in STA, P2P and P2P CLI opmode only.
Add NAN iface to support for random mac for NAN vdev in NAN
pairing protocol.
This allows to transmit the NAN tx frames to the lower layer.
Change-Id: I06b9340cf9bfd9f6a5e77ff02d19d8a87baea0ff
CRs-Fixed: 3257667
Align command "setMaxAssoc" to INI "cfg_assoc_sta_limit" since they are
for same configure of host side.
Change-Id: Iccf60f261beef7fb7cc776ee691992e06bc7fa76
CRs-Fixed: 3241183
RPS CPU mask is getting set even if feature is not enabled,
due to this RPS config is taking affect and throughput is degraded.
Fix this by checking dynamic RPS enablement before setting RPS CPU mask.
Change-Id: I472a600e665271db7ea1e6fa650d88cba7804ab8
CRs-Fixed: 3258049
Fix TX failure message flooding in the cnss diag log in the third
party platform when running UDP performance test in high bandwidth.
The TX follow controller might be disabled for the legacy ROME module
due to IPA might be not enabled in the kernel config.
Use rate limit print version to mitigate this error msg flooding.
Change-Id: Id33c2a42a6490f734e83343f6d26e37cd6887bbe
CRs-Fixed: 3256599
For multiple concurrency on dual mac, connection
dump is not added if a single vdev is present on
one mac. For example if 2 connections are on MCC 5 GHz
and one connection is on 2 GHz in DBS system then in
connection dump only MCC/SCC vdevs will be present.
Fix is to include single vdev in connection dump and
cleanup dump_dual_mac_concurrency as concurrency can
be checked with in loop instead of separarte mac share
check for each vdev.
Change-Id: I09ab964915cd3b132c3bd3cba096e40cba238eed
CRs-Fixed: 3254806
For PASN authentication, the mgmt frame TX happens before
vdev is started. Firmware configures RX filter for the vdev
mac address during vdev start only. So if firmware sends PASN
initiate request with source mac address as vdev mac address,
then the RX filter willnot be configured since vdev mac is same
as source mac, this causes the PASN M2 frame from SAP to be
dropped and No ack is sent.
Configure RX filter for vdev mac address when vdev is not up.
Change-Id: I52c9e50a250be1935d1097d45753fa941ae73bea
CRs-Fixed: 3254628
In current code changes call to apply tput policy
was missing, So to fix issue add call to update
the tput policy.
Change-Id: I29ef9db5789406877deb3177233c10ba1ae9db9c
CRs-Fixed: 3254183
SAE and SON use data path enum IEEE80211_STATUS_* to assign status
code.
Use proper control path enum wlan_status_code instead.
Change-Id: I50bde9e7983860692ffe381c74e894b84de11ddf
CRs-Fixed: 3253954
Currently we are getting current vote level and bus bandwidth
high threshold from hdd context. But these are moved to dp
context under dp component.
So to fix issue add and call ucfg api to get and set values.
Change-Id: I2c36b2df76c5932dc0d1bdbdec21ce2da5f537bc
CRs-Fixed: 3252743
While requesting sta stats, tx/rx netdev stats update are
happening from adapter. But as part of latest code change
these stats are moved from adapter to dp interface, because
of which some of stats values are displayed as 0.
To Fix the issue get tx/rx netdev stats from dp interface,
Also add calls to clear netdev stats
Change-Id: I64523b035c1d902ccc4a45d82f7508751e518150
CRs-Fixed: 3247540
Currently if SAP is up on 5 GHz DFS/non-DFS channel and country
change happens to world mode where SAP is not allowed on 5 GHz
channels then it moves to a 2.4 GHz channel and saves current
operating frequency band information, now again if a country
change happens SAP tries to move back to any allowed 5 GHz
DFS/non-DFS channel.
Sap should come to non-DFS channel first. If not available then
it should come on DFS channel
To address this issue, add a fix to check for first valid 5 GHz
non-DFS channel and first valid 5 GHz DFS channel. Move to
valid 5 GHz non-DFS channel if present.
Change-Id: I0cf3841e35e22efc0f518ce15b4cab40996cc645
CRs-Fixed: 3247522
Add change for WAPI IE in probe response introduced by
change : I9212e0fe9d495e8300a2bfbed65d398e0fb27170
and also add change to print mac address while
updating mac from old mac address to new mac address.
Change-Id: I6481b211fa26c540b079d119070cc2f1cc1d3abf
CRs-Fixed: 3249823
Currently, while we request netdev stats
we use the MAC address to find the DP interface.
There is a possibility that while we are
passing mac address to find DP interface
in parallel dynamic MAC update can happen
which will cause MAC address mismatch,
which will result in the DP interface not found
issue.
To fix the issue, instead of MAC address use
netdev name to search DP interface from
the list of available DP interface.
Change-Id: Ib04ce2fc7193be4733b16707600a10d3d729813c
CRs-Fixed: 3247725
Firmware aborts the ongoing scan upon receiving new scan
channel list (through WMI_SCAN_CHAN_LIST_CMDID). Channel list
might get updated from userspace through commands like
country code change, power level change(SET_FCC_CHANNEL),...
It affects the features that are dependent on that scan,
e.g. ongoing connection, p2p find, etc.. Few frames might
be stuck in firmware as the scan is canceled.
It's recommended to defer the scan channel list update till
the current scan is done. This is already supported and
guarded through the ini param enable_pending_list_req
but disabled by default.
Enable the ini param to make sure above scenarios are not
affected due to channel list update.
Change-Id: I4176bb6a03657cf32f0c099b72254d61207ea6ca
CRs-Fixed: 3250137
Idle roam inactive time is expected in seconds but
the host driver is sending it in milliseconds, this causes
idle roam trigger not happening at the target.
Send the idle roam inactive time in seconds instead of
milliseconds.
Change-Id: If326a4bf464164183fdcd9baea9002483053adf7
CRs-Fixed: 3246541
Add assoc link bit in mlo_support_link_band to indicate supported band of
assoc link.
bit4: 2 GHz
bit5: 5 GHz
bit6: 6 GHz
Change-Id: I8fa156f43656ba91b8622ce12034ddad0bcf28a2
CRs-Fixed: 3250252
Display control pipes info on WOW ack failure which helps to
debug issues when full debug history is not available.
Change-Id: I6a84aa01c07831b7109d0741337cae6ac0be2f44
CRs-Fixed: 3246284
The AP rejects the FILS-IM association request with reason
"Invalid IE format". In the assoc request, two problems are
seen:
1. The RSN IE has a junk group management cipher suite.
2. FILS HLP container IE is fragmented, and the fragment
IE does not immediately follow the HLP container IE.
In the assoc request, the RSN IE encoded in the authentication
is unpacked and the PMKID is replaced with the pmkr1 name
derived at the end of FILS authentication. Currently, the
existing PMKID in the RSN IE is replaced only if the group
management cipher is present. In non-802.11w case, the new
PMKID is appended at the end of existing PMKID, and leads to
improper IE format.
To fix this, replace the existing PMKID whenever PMKID is
present.
To fix invalid HLP container IE format, encode the HLP
container and its fragment IEs together in the assoc request.
Also, inorder to get the pmksa match from the crypto table for
a FT-FILS, fill both ssid and cache ID. Without cache id, the
cached entry is not updated with MDIE.
Change-Id: I654b5527a726eb7872b90fb19a3d97623f3caa68
CRs-Fixed: 3233081
Correct description of ratemask_set ini for VHT mode
to avoid wrong configuration.
Change-Id: I91b887d8268f8faa0d0c32f90da032d00eaa14f2
CRs-Fixed: 3198950
In target_if_get_roam_vendor_control_param_event_handler,
there are 2 possible NULL pointer dereference issues:
1. Host calls target_if_get_psoc_from_scn_hdl API to get
psoc object. But as per current logic even if psoc is
NULL, psoc is dereferenced by passing it as an argument
to get_wmi_unified_hdl_from_psoc.
2. Host calls get_wmi_unified_hdl_from_psoc API to get
wmi_handle pointer. But as per current logic even if
wmi_handle is NULL, wmi_handle is dereferenced by
passing is as an argument 1 to function
wmi_extract_roam_vendor_control_param_event.
Fix is to update the sanity check logic for psoc and
wmi_handle pointers to avoid possible NULL pointer
dereference.
Change-Id: I3c3df062b538b05218e729d7bf6806e221073269
CRs-Fixed: 3242435
Wrong value of Roam reason and sub-reason code is sent to
userspace via diag logging.
Convert the value of reason and sub-reason code to qca
specific code before sending it to userspace
Change-Id: Iebdc5f8673e2da6a208a89caca9a742202256bcc
CRs-Fixed: 3236178
Currently a userspace request to enable NS offload dynamically
gets rejected if the offloads are in disabled state.
After this change, when a request to enable or disable of NS offloads
is received in the host and if the trigger type is to dynamically update
the NS offloads, then update the dynamic offload configuations and inform
the FW.
Change-Id: Ifb4a1d37b5f2e6c89d043b00f9cc0aaf426d870e
CRs-Fixed: 3237980
Add following host fixes related to EMLSR association.
1) Use phy cap get macro to extract EMLSR hw mode id.
2) Add logic to send EMLSR cap flag during vdev start.
3) Add logic to copy EML caps from assoc link common
info subfield to MLO peer assoc struct in order to
share EML caps to FW on both links via peer assoc.
4) Add checks to update EMLSR cap flag only if both
STA and AP support and advertise EMLSR mode.
5) Send EMLMR support flag along with EMLSR support
flag to FW as part of vdev set IE cmd for roaming
scenarios. Also, update common info length when EML
caps are present.
Change-Id: Ied2570d498a43adadd93899d4fdbe023d320676b
CRs-Fixed: 3235059
In the cm_roam_result_info_event() api, for roam result the
current AP bssid is sent instead of candidate AP.
Correct this to send candidate AP bssid during roam result
logging.
Change-Id: I4b1d4634faa3fbf3e7b32af8c13d4b444d26c505
CRs-Fixed: 3237021
When SAP tries to come on 2.4 GHz channel with 40 MHz bandwidth
then it should start on same bandwidth if no other interface is
up. But currently SAP is getting switch from 40 MHz to 20 MHz
even in standalone case.
As a part of fix, check any other vdev is present on same mac or
not. If it's not present then start SAP on given bandwidth
Change-Id: Id9625a3dfaec34480f86b7ca1459ea33c32299fe
CRs-Fixed: 3226558
Add change in bus bandwidth to set set high bus vote
level into DP component introduced by change to
skip special frame rate info update.
Change: Ie8989dde506c654525099f9d154abe93162a0bac
Change-Id: Ib0a2241ac63536fe885c89715d70c778af444f2d
CRs-Fixed: 3245764
HDD changes to incorporate new DP component
Changes were backed out because of association issue
introduced by MLO adapter to DP interface mapping issue
and to avoid any further regression.
Re-introduce changes after performing complete sanity to
vet out any regression which might be introduced by these changes.
Change-Id: I058b9121c8490e9b0906421a35e01c55a1a7c25a
CRs-Fixed: 3198619
Some APs sometimes don't honor Qos null frames under WoWLAN
mode if station's ITO is too small. Introduce a new ini
gActionOUIExtendWowITO to specify AP OUIs which exhibit
this behavior. When connected to such an AP, the station's
ITO value will be extended when in WoWLAN mode.
Change-Id: I41ade7e6a6f5ca8d9b2aac2ae25427ca7fa8fe6b
CRs-Fixed: 3238200
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I20b08a2fd446da4e3c17813aa64e368750286114
CRs-Fixed: 3239896
sbs_num contains the sbs_freqs array size. Do not clear it
to 0 before call get_sbs_chlist API. Otherwise the size_of_sbs
will be 0 and can't add sbs freq to list.
Change-Id: I318edd12978f73e9f75ab5298c36ceec57c5df6d
CRs-Fixed: 3243780
In pkt_capture_datapkt_process and pkt_capture_mgmt_rx_data_cb
pkt_capture_vdev_put_ref is missing in error case, because of
which vdev ref count is not becoming zero when vdev is down.
Add pkt_capture_vdev_put_ref in all the error cases.
Change-Id: I55353356f059a367d57c64625f404e3940235be1
CRs-Fixed: 3228599
Host driver rate limits successive get_txpower
calls within 3 seconds, and sends cached stats
from the hdd_stats. However, max_tx_power is
not updated in the hdd_stats. Therefore,
the cached tx power is always 0 dBm.
Also, the hdd_stats would be only updated when
CP stats are received from the firmware for
get_station/dump_station calls. get_station is not
periodically queried for SAP interface from the
framework. Therefore, tx power for SAP interface will
always be 0 even if hdd_stats gets updated.
To fix this, instead of hdd_stats, return the
max tx power from the pdev stats cached on the pdev.
Change-Id: I0c8d8baab790c7344bd8913158f8eda63736474e
CRs-Fixed: 3230649
Refine PASN peer delete all path, to post message to
scheduler thread to process the peer delete all
message for PASN peers. Handle response timeout in WMA.
Resume vdev deletion after removing pasn peers
Add vendor command support to parse below vendor commands:
QCA_NL80211_VENDOR_SUBCMD_PASN
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT
Send install key command to firmware to install the
PTK upon receiving
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT
vendor command. If LTF keyseed is also received,
send the LTF keyseed to firmware.
Sent PASN auth status to firmware upon receiving
QCA_NL80211_VENDOR_SUBCMD_PASN command.
Change-Id: Idc9c69f7288b0774cc6d9bdcfed13ba3684bbc72
CRs-Fixed: 3231205
Uninitialized variables in pkt_capture_process_tx_data()
and pkt_capture_callback() may lead to Unpredictable behaviour.
Initialize corresponding bssid variables to avoid it.
Change-Id: I1ca6e7e04c8920111414a83c29cb61883b72370c
CRs-Fixed: 3241885
Scenarios are:
1. Host receives ROAM_START from firmware
2. Host receives EAPOL M1 from AP, host forwarded
it to supplicant and supplicant buffered it (with
timer 100 msec) to process it after association
completion.
3. Host starts processing CP stats request, which
holds RTNL kernel lock
4. Host starts a CP_STATS_WAIT_TIME_STAT (800 msec)
timer and sends WMI_REQUEST_STATS_CMDID to FW.
So cp stats are holding the RTNL lock.
5. In waiting state host/FW completed roaming within
a few milliseconds. Host Call roamed indication
to the kernel. Kernel post it to the Work queue
to indicate this to the supplicant. The Work
queue requires the RTNL lock to send the
indication to the supplicant.
6. Now Kernel is waiting on the RTNL lock taken by
the CP stats request which is waiting for the CP
stats response (WMI_UPDATE_STATS_EVENTID).
7. Host receives CP stats response but the host is
unable to handle it with the below reason.
8. Timed out happens for WMI_UPDATE_STATS_EVENTID,
then Kernel takes RTNL lock to indicate
association/roam completion status to the
supplicant.
9. As Kernel is sending association indication
after CP_STATS_WAIT_TIME_STAT (800 msec), by
this time supplicant deleted buffered EAPOL
first frame, this results in DUT failing to
initiate the 4-WAY handshake.
10. Finally AP sends the Deauthentication frame
to DUT.
Reason for unable to process CP stats response :
As per the current design, While processing Roaming,
the host deletes the old peer and creates a new peer
for roamed AP. If the Host receives cp stats response
after peer delete due to roaming, the host is unable
to stop waiting for timer CP_STATS_WAIT_TIME_STAT
and fails to release RTNL kernel lock till timeout.
After time out only, Kernel can take RTNL lock to
indicate association/roam completion status to the
supplicant.
Fix is to stop the wait timer CP_STATS_WAIT_TIME_STAT
and release RTNL kernel lock even in case peer has
deleted by HOST for which CP stats request sent.
Change-Id: Ie5b5275da10a06da50b2fbb8ab206b78f2c64d6a
CRs-Fixed: 3234063
Acquire the runtime pm lock when roam sync event is received
and release after roam sync complete is sent.
Change-Id: Ic56d353dd343f5fcbc228a8d7251e047177b9a9b
CRs-Fixed: 3238723
Wrong value of tx status sent to supplicant for MGMT frame
via diag logging.
Convert the tx status value to enum diag_tx_status specific value.
Change-Id: Iba6d8011280d41a874509d2a1b4fed9a16ee585c
CRs-Fixed: 3236363
With introduction of TDLS on 6 GHz, some of the channels
that peer can support will be same for 6 GHz band other
bands. So, extract frequency by using peer supported
operating class and supported channel list which can
be used for further processing.
If channel numbers are used then the duplicate channel
numbers are removed which may lead to skipping 6 GHz
supported channels.
Change-Id: Ic6838d05c3dab5a0cc17483890b83805e076684c
CRs-Fixed: 3233999
After WLAN_TWT_CONV_SUPPORTED enabled, TWT variables are moved from
COMP_MLME to COMP_TWT, APIs are updated too, hdd_update_tgt_twt_cap
just intersects enable_twt and twt_requestor of COMP_TWT instead of
COMP_MLME, legacy variable mlme_cfg->he_caps.dot11_he_cap.twt_request
isn't controlled by ini enable_twt now.
Change-Id: I71bb09704fd96591f37019ebbb77733cff04af25
CRs-Fixed: 3229121
