Critical update is the explicit signaling for STA to notify
any change in BSS param.
Present support is there for beacon, host notify to FW by
updating current link CU param in wmi_bcn_tmpl_ml_info TLV
of BCN TMPL CMD by setting the corresponding cu_vdev_map
for category 1 / category 2 based on change in critical
update params of ML VDEV.
The same Critical update signaling is extended to 20TU
unsolicited broadcast probe response.
In 6 GHz link host notify the same category 1 / category 2
cu_vdev_map critical update params of ML VDEVs in 20TU
enabled group wmi_prb_tmpl_ml_info TLV of WMI_PRB_TMPL_CMD.
CRs-Fixed: 3314429
Change-Id: I84dbd1901c5a3f2ef28f981c581fd7350d147829
The kernel-doc script has identified numerous documentation issues in
wmi_unified_tlv.c, so fix them.
Change-Id: Icf82bc87e576965f5bfe64d416be2da71a250cb6
CRs-Fixed: 3326205
Map wmi_service_eirp_preferred_support to
WMI_SERVICE_EIRP_PREFERRED_SUPPORT in populate_tlv_service.
Change-Id: Ibbf3d6fbd5b257f5562a0a51f11dec7e2bcf07bd
CRs-Fixed: 3322363
In the current implementation, the Direct DMA completion event is getting
processed in the tasklet context. When the Direct DMA events land on the
same processor core as the one used by the WLAN data path events, the
Direct DMA events can pre-empt the data path events as the datapath
events usually run in NAPI context. This could impact the data path
throughput when there is a high volume of frequent Direct DMA events. To
fix this, Direct DMA events can be run in work queue context based on
user configuration. Add support for the same.
Change-Id: I1a89b185c6765addc7ee725e9324025f0318d9ed
CRs-Fixed: 3276157
Currently, in non-dbs platforms, firmware controls NAN enable/disable.
To enable NAN in non-dbs platform, host driver sends NAN generic
request to firmware and firmware enables NAN and provides generic
response to that.
But for some legacy platforms, requires enable NAN in host.
For this, firmware adds new TLV for NAN enable response and
sends with NAN generic response. Host extracts the NAN enable
response parameters from NAN generic response packet.
Change-Id: I1f4460137913780d4c262b5e40342dbb0b9a87c7
CRs-Fixed: 3263746
VDEV param id is logged in hex without 0x(hex) prefix
which creates confusion. And hence log WMI vdev param id
with 0x(hex) prefix for easy correlation.
Change-Id: Ib8a868fa43a911817c8e5540a07562dde08e0818
CRs-Fixed: 3320943
Add WMI support for WMI_SERVICE_EIRP_PREFERRED_SUPPORT service bit,
which indicates that the target prefers EIRP in the
WMI_VDEV_SET_TPC_POWER_CMD_ID.
Change-Id: I1433bd698e124336082e12f509f271c9dd7df40a
CRs-Fixed: 3307372
Place extract_ext_fcc_rules_from_wmi function near its
caller and modify function definiton of empty function
reg_set_pdev_fcc_rules.
Change-Id: I6918addbe81bb410355616023e0c6dac534700b6
CRs-Fixed: 3286479
To protect user privacy, print SSID with QDF_SSID_FMT
and QDF_SSID_REF, then SSID will be hide in logs if
anonymization is enabled.
Change-Id: Ifad0ccd76bd1184a9b1d20f3d7fa4455df924843
CRs-Fixed: 3291826
Convert host channel width (enum phy_ch_width)
to WMI channel width before sending this value
to target.
Change-Id: If6ec2f7a9872cd28eafdce30397ec9aa1b0a1739
CRs-Fixed: 3311319
Add ACTION_OUI_11BE_OUI_ALLOW enum to support new WMI action
oui type WMI_VENDOR_OUI_ACTION_ALLOW_11BE.
Add scan entry to candidate validation struct.
Change-Id: I502a246584cd5ee6b4759d8fbb67629628314560
CRs-Fixed: 3301859
On the initiator side, Host needs to send
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID to firmware before sending the
PASN Auth frame. Hence, move send_set_mac_addr_rx_filter_cmd_tlv() from
wmi_unified_p2p_tlv.c to wmi_unified_tlv.c file.
Change-Id: Ia5517dbdd5ec46f611537b12b7046e3a9d859082
CRs-Fixed: 3304909
This change is to handle new WMI param sp_start_offset. It
is use to pass value to fw to offset the start time of next SP.
Change-Id: Id3eb1cecdcdfc883c0620ad7f5cf18a50bd5256b
CRs-Fixed: 3266687
Currently host does not update band capability to fw as
part of feature set info.
With this change update band capability as well as part of
feature set info.
Change-Id: I09982f2f1b7b831a62f6f4db97691aeb4a4fb894
CRs-Fixed: 3303427
- target_if layer was calling UMAC layer wifi_pos_get_rx_ops(). This was
leading to compilation errror in WIN platform. Hence, added target_if
layer API target_if_wifi_pos_get_rx_ops().
- WMI_RX_SERIALIZER_CTX is used to register PASN peer create and delete.
WIN platform does not use the above context. Hence, use WMI_RX_UMAC_CTX
for WIN and WMI_RX_SERIALIZER_CTX for MCC.
- WIFI_POS rx_ops callbacks are registered in target_if layer. But, these
callbacks are called by UMAC component. Hence, move this registration
function to UMAC layer.
- Add an API to convert host PASN peer type value to target defined value.
Change-Id: I2a262121f959c2343e88158b94468d104b9e164c
CRs-Fixed: 3289852
Based on the new requirement, fw fills the tx rate count and
rx count per mcs index in the peer extd stats event.
Add logic to parse tx rate count and rx rate count from peer
extd stats event.
Change-Id: I13382366f52964b83eb26473fa03267ac7309bb9
CRs-Fixed: 3289779
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined, WMI_HOST_PEER_*
can be translated to WMI_PEER_* through API
convert_host_peer_param_id_to_target_id_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined, WMI_HOST_PEER_* in
common code is sent to firmware directly, which is incorrect.
Define WMI_HOST_PEER_* to WMI_PEER_* if ENABLE_HOST_TO_TARGET_CONVERSION
is not defined. Then WMI_HOST_PEER_* can be used in common code.
Change-Id: I50aa604d8822a81eed223c8551e542007929424e
CRs-Fixed: 3271470
pm_responder_bit was not getting parsed as part of twt setup completion
and stats event in case of WLAN_TWT_CONV_SUPPORTED. Added support for same.
Change-Id: I46f88299850ca3f4402780c302a5cd47ffbc1dc7
CRs-Fixed: 3245871
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
When set_fcc_channel is set, host driver sets tx_power info about
channels 12, 13 to hardcoded values. Now firmware sends information
about channels 12, 13 to host driver and currently there is no
support to extract and store this information and use it to
modify tx_power of channels 12, 13 in host driver.
Add support to store the tx_power of channels 12, 13 received
from firmware and use this to modify tx_power of fcc channels.
Change-Id: Ie7b20a75bb09956a70b7b133ce7ce9beb8db138b
CRs-Fixed: 3270676
FW-Host Handshake for BANG_RADAR_320_SUPPORT
1. FW advertises its capability of processing BANG_RADAR_320_SUPPORT
id via wmi service bit 'wmi_service_bang_radar_320_support'.
2. If the host is capable of processing the "BANG_RADAR_320_SUPPORT"
event id, host sends the capability in WMI_INIT_CMDID setting a bit in
host_service_flags
Change-Id: Ia26a7b8e8ee78aceb801d0053770379bd6d5a9cb
CRs-Fixed: 3270525
Update peer_chan_width_switch_info as per latest
fw common header file to include puncture parameter.
Change-Id: I1a68991ed8b9c653d31c4bc0c3ad3660d1104de3
CRs-Fixed: 3278709
Add API to extract MLD AP MSD capabilities from MLO IE
common info field if present. This will be shared with FW
via peer assoc cmd.
Change-Id: I0ebcd5408a40f3314932d4a2a7e586c208af2ee5
CRs-Fixed: 3271118
Remove unused param key_rsc_counter of set_key_param
structure, as key_rsc_ctr is used to send key rx sc
counter to fw and rename key_rsc_ctr to key_rsc_counter
as win is using key_rsc_counter.
Change-Id: Id58aabb30d772f8f620ac9f96890fcac0193777b
CRs-Fixed: 3256574
Currently host sends many vdev or pdev set param commands
separately to firmware.
Combine all vdev or pdev set params together where ever
possible, send to WMI.Based on service capability
WMI_SERVICE_COMBINED_SET_PARAM_SUPPORT, host decides whether
to send all set params to firmware at once to reduce number of
transactions or need to follow legacy way i.e send params
separately one after the other.
Change-Id: I0a36dd66a7ccb27f2ecd437cf7b9d08667e27472
CRs-Fixed: 3151418
Based on new requirement, driver needs to send feature set
information to fw as part of wmi init command.
With this change, fill the feature set info in feature set bitmap
and send this to fw with wmi init command.
Change-Id: Ic405c7e8e5ddd1399deacfaab240e979468c53c2
CRs-Fixed: 3262862
After received rx packets, host should keeps in active state for some time
(500 ms by default) until next runtime suspend is triggered, If found rx
link speed change from good to poor or from poor to good, can send
to firmwware by WMI instead of QMI, QMI may block current thread for N msec
for sync mode is used.
Change-Id: I94b45ce6125a24466fbcf57e22f1a56cbdeefe9a
CRs-Fixed: 3262032
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
If found rx link speed change from good to poor, or poor to good, need send
to F/W. It may happen frequently. To avoid power side effect, send to F/W
by QMI instead of WMI.
Change-Id: I2e7ddd3ae539257c6b195cb13da221f886debbba
CRs-Fixed: 3255042
Fix EMLSR support bit assignment in both vdev start and
peer assoc add params APIs as the macro to set EMLSR cap
bit is not taking effect.
Change-Id: I7d96f4cc65301efa01d84e2afca7d89cdbc5fcf4
CRs-Fixed: 3250857
